HPH NT-V8 RK3368 Marshmallow ROM by mo123

[mo123]

Ok!!!works!stuttering nowhere to be found!I tried your resource
One can put a kernel?

Will most likely cause a bootloop if you change parts of the firmware and will loose lots of optimizations.

[natzen]

New firmware v1.1 released
See OP for details.

- Latest video framework for improved video playback for h264/h265
- Added Pass-through settings
- Updated apps
- Updated NTMC v16.1.5
Add AVS video format support
Optimize audio track switching
Added surface rendering changes
- Updated to the latest Timezone data
- Added wired Xbox remote file
- Fix system stutter caused by usb audio
- Fix audio stutter with high disk usage
- Improve the hdmi nlpcm mode for HD Audio

thanks for all mo123 , you know if i rename to update.zip and place to racine will work or it's only flash ? i don't want erase all application ... :-(

[Jura46]

Ok!!!works!stuttering nowhere to be found!I tried your resource
One can put a kernel?

[mo123]

New firmware v1.1 released
See OP for details.

- Latest video framework for improved video playback for h264/h265
- Added Pass-through settings
- Updated apps
- Updated NTMC v16.1.5
Add AVS video format support
Optimize audio track switching
Added surface rendering changes
- Updated to the latest Timezone data
- Added wired Xbox remote file
- Fix system stutter caused by usb audio
- Fix audio stutter with high disk usage
- Improve the hdmi nlpcm mode for HD Audio

[jobojobo]

I'm just testing the HPH NT-V8 Marshmallow ROM V1.0 by mo123 with Belink i68, so far everything is fine.

[gefattern]

Hi Mo ,

thanks for answer , maybe i have to install an APP like PPP Widget to get them running i dont know , but i can set the Modems with "Putty" on PC to "Modem only Mode" .

How to put the "Stock" back i do not know exactly . Maybe some other Users with unchanged 3G Modems can test it ???

Until now there is only a Recovery for the Geekbox RK3368 ??? not for other RK3368 Devices ??? Bad for us . I think on XDA are Users with Knowledge of Xposed and

Recovery for RK3368 .

I can not say much about "passtrough" i only have 2.0 or 2.1 Stereo , my Devices are connected over a HDMI 1.4 Switcher to TV , the TV is Connected by optical Wire to

my old Thypoon 5.1 DD/ DTS Device , that delivers the Sound to me . I always test the Notification Sounds if i install a new Rom to see if Sound works , if i choose them fast

enough the Sounds dont cut off a part off it self , but if you wait 2/3 seconds you can hear the cut offs and a clicking like the Line closes , like the Sound Settings in Kodi or your

NTMC explain , there is a Option to hold the Line for 1 minute , 10 minutes , never or always , i think you know what i mean , and this must be the same in Android , you always

hear a silent click when it close . If this can be fixed would be nice , if it can ???

The only thing i miss , is since KK i, a working "Equalizer" , the Bass is a little to hard set if i listen to Music . Thats all i can say about Soundproblems.


Thats all nice Day to all


gefattern

[natzen]

On KitKat it was easy but Google increased security so much, I don't think a fully working solution is available.
The only working way is to patch the app itself or look on xda forum if someone didn't upload a modified app perhaps.

on tronzid rom ionix patched kernel https://mega.nz/#!XcIGVKBC!g9KsetZlz...MrtHNkuGJHZvLA

i don't know if can work on marshmallow

[mo123]

thanks for all your work ,if it's possible to patch hdmi detect for hbo and other app ... i don't know if it's possible .

On KitKat it was easy but Google increased security so much, I don't think a fully working solution is available.
The only working way is to patch the app itself or look on xda forum if someone didn't upload a modified app perhaps.

[natzen]

These 2 modems are supposed to work correctly I hear, Huawei E5573 and E3372.
The usb_modeswitch utility should switch the modems into CDC Ethernet mode instead of mass storage.
But I'm not sure how to check it for your 3G modems.
Can you get the stock software back on them instead of MobilePartner software to test again if it works?

I couldn't get Geekbox recovery to work, I will try to find a different one and test.
I try to build my own Xposed from source code into the firmware but run into some trouble, so will only test that later again.

I have to translate another app today then will try to finish the firmware today.
Was too busy testing new RK3229 things and the latest RKMC.

The new firmware will also have an easier way to set pass-through correctly for HDMI and SPDIF, I hope it fixes the problem some people had.
If someone has pass-through problems and want to test a solution before the new firmware is released, PM me.

thanks for all your work ,if it's possible to patch hdmi detect for hbo and other app ... i don't know if it's possible .

[mo123]

Hi Mo ,

once more , i tested the 3 Huawei Sticks that i have S4011/E1550/K3765 non of them can be used under "more" "Cellular Network" or "Data Plan" .

If i press "Cellular Network" it stops and closes , after that it goes back to Settings . "Data Plan" says i have to insert a Sim , but maybe it does not

work because i flashed my Sticks with "MobilePartner" Software ???? , but i dont think so .Until now i do not use them anymore , but it will for sure nice ,

if that Function would work too . Maybe you can delete to the next Version already the double Entrie "Cast" like i discribed some Threads before .

Can you say anything about Xposed and Recovery , please , i already ask two Times ???

Hope it helps to make future Roms better , good Work , go further ,

I really cant understand my strange "Vodoo Fan BUG" how can this happen ???


nice Day


gefattern

These 2 modems are supposed to work correctly I hear, Huawei E5573 and E3372.
The usb_modeswitch utility should switch the modems into CDC Ethernet mode instead of mass storage.
But I'm not sure how to check it for your 3G modems.
Can you get the stock software back on them instead of MobilePartner software to test again if it works?

I couldn't get Geekbox recovery to work, I will try to find a different one and test.
I try to build my own Xposed from source code into the firmware but run into some trouble, so will only test that later again.

I have to translate another app today then will try to finish the firmware today.
Was too busy testing new RK3229 things and the latest RKMC.

The new firmware will also have an easier way to set pass-through correctly for HDMI and SPDIF, I hope it fixes the problem some people had.
If someone has pass-through problems and want to test a solution before the new firmware is released, PM me.

[Jura46]

Hurray! will wait!

[gefattern]

Hi Mo ,

once more , i tested the 3 Huawei Sticks that i have S4011/E1550/K3765 non of them can be used under "more" "Cellular Network" or "Data Plan" .

If i press "Cellular Network" it stops and closes , after that it goes back to Settings . "Data Plan" says i have to insert a Sim , but maybe it does not

work because i flashed my Sticks with "MobilePartner" Software ???? , but i dont think so .Until now i do not use them anymore , but it will for sure nice ,

if that Function would work too . Maybe you can delete to the next Version already the double Entrie "Cast" like i discribed some Threads before .

Can you say anything about Xposed and Recovery , please , i already ask two Times ???

Hope it helps to make future Roms better , good Work , go further ,

I really cant understand my strange "Vodoo Fan BUG" how can this happen ???


nice Day


gefattern

[mo123]

Hi Mo ,

thanks i wait , then i can use it for higher Versions ,

if not to much is changed .

I already made Screenshots for the Translations.

Used your Note2 , but when i open up one of the Files

the German ö,ä and ß in the words are shown in strange

black Signs.Can i use WordPad for it ???

i tried a Geekbox/Github RK3368 Recovery but they did

not work , no Boot into it.Stuck on Nagrace Boot.


nice Day

gefattern

Please try editing with Notepad++ instead of word.
Just check if the characters don't make black signs.
That was a problem with the Lollipop translations then I had to replace the black characters with the correct ones which was very difficult to do manually.

Rockchip fixed the new RKMC problems so that is good news then I can maybe finish my new firmware today.

[gefattern]

Hi Mo ,

thanks i wait , then i can use it for higher Versions ,

if not to much is changed .

I already made Screenshots for the Translations.

Used your Note2 , but when i open up one of the Files

the German ö,ä and ß in the words are shown in strange

black Signs.Can i use WordPad for it ???

i tried a Geekbox/Github RK3368 Recovery but they did

not work , no Boot into it.Stuck on Nagrace Boot.


nice Day

gefattern

[mo123]

Hi Shomari ,

i really think Mo has no Problem with that , but for sure you can ask him ??? if you want.

I will be very happy if i could Boot without this PIcture only "Android".

I tried but failed i think Sergio Pov. Tool does not Support RK3368 even if it extract it.

Shall i upload a extracted "boot.img" from Mos latest MM for you ??? , or do you have the FW self ???

thanks for Help

gefattern

I will send you a boot.img to remove it by PM.
Will finish v1.1 MM ROM tomorrow.
Just waiting for Rockchip to fix the new RKMC.