[ROM] Mecool BB2 Pro(DDR4) / Vorke Z1(DDR4) SCV2-ATV (Android TV)

[superceleron]

Hello superceleron ,

I need some help please. I think that during the process of installing the rom I cleaned the data all of the box, mecool bb2 pro. Now it is not detectable on television, nor on the pc even with the usb burning tool.

Is there anything I can do to revive the box? Thank you.

You need to short emmc pins... search the forum!

[firewel]

Ok i view some foruns and some videos, but for this box i didn't know what pins i have to short. Did you know? Somo boxes are for example 5 and 6 pins, but for this box i didn't find the answer.

Thank you for the help superceleron

[superceleron]

Ok i view some foruns and some videos, but for this box i didn't know what pins i have to short. Did you know? Somo boxes are for example 5 and 6 pins, but for this box i didn't find the answer.

Thank you for the help superceleron

Really dont know... some 5/6 others 17/18 and 19/20... so who knows... :/

[scooter2014]

But if you do find it please post in our forum for pin locations Thread so other users can use the info. http://freaktab.com/forum/main-categ...short-location

[firewel]

it's pin 5/6. Works great but i only can install superceleron room. Stock firmware from mecool its not possible but its better that away Thank you

[scooter2014]

Maybe he install in his firmware a way to keep that crap off your device.

[Figaro1991]

Installed (finally) the rom this morning and now configuring it.
Xposed is a welcome addition. Thank you very much.


For new flashers (android that is) like me:

YOU WILL NOT NEED POWER CONNECTION TO FLASH ROM.
Note: For Windows 10 Make sure the USB burning tool is installed using the Windows 8 compatibility. Right click on the "Setup v2.0.x..." file and select the 'Troubleshoot compatibility' option and follow the instructions to make sure it is Windows 8 compatible and save the settings. This will help with having the USB burning tool recognize the box.

1. Run USB Burning Tool. To change to English select the second menu item from left at top and in the drop down you will be able to select 'English'.
2. Select the 'File' menu at top left of program window and select 'Import image'
3. Find the image file you unzipped/decompressed. For this example the file is 'SC-V1-BB2Pro-VorkeZ1.img'
4. Connect one end of the two sided male-to-male USB to PC usb port,
5. Hold down reset button by using a paperclip end in the small hole is on the back of the box near the input ports and then plug the other end of the USB cord into the box, release reset button (paperclip end)
6. The USB Burning Tool should recognize the box and and show it is connected in the top box area (mine displayed as Hub 2...) once connection is recognized/confirmed
7. Click on "Start" button on burning tool to begin flashing, Should complete in under 10 minutes.
8. When the program displays the flash is completed successfully, click "Stop" button on burning tool, disconnect USB from box.
9. Now you can connect the box to the TV hdmi, and plug in the power. Wait about 10 minutes for it to boot/startup and then you will be able to configure the box to your needs.

(adaptation of instructions provided)



I had messed up my device attempting to add SU to the stock rom in the first place. I could not recover the stock rom to flash to the device, however after using these instructions I was able flash this rom and get it to start up.
To do: establish SU, configure Play Store, install Xposed add ons, and other programs.

[XaTriX]

I got a classic mecool bb2 version (non-pro), is that rom compatible with ?

XaT

[superceleron]

I got a classic mecool bb2 version (non-pro), is that rom compatible with ?

XaT

Nop!

[XaTriX]

Thanks for your answer, i was going to test
Is someone know an android-tv rom for the bb2 (non pro, DDR3) wizz me !

XaT

[tharunam]

@superceleron, Thanks for your latest rom. I only have one problem. I cannot seem to add a VPN for the android box that is pptp version, where you give the location, and then username and password for the vpn. This way you can add multiple location for the same vpn provider. Any help on this would be very appreciated. Great job on the rom

[superceleron]

@superceleron, Thanks for your latest rom. I only have one problem. I cannot seem to add a VPN for the android box that is pptp version, where you give the location, and then username and password for the vpn. This way you can add multiple location for the same vpn provider. Any help on this would be very appreciated. Great job on the rom

Well i need to check it, but i think its broken on the ATV build.
Since i dont use VPN i never check it.
But i will see if i can do something about it, but not promising nothing since him really full of work this days!

[tharunam]

Well i need to check it, but i think its broken on the ATV build.
Since i dont use VPN i never check it.
But i will see if i can do something about it, but not promising nothing since him really full of work this days!

That is fair. As long as you are willing to look at it is good enough for me.

Thanks.

[tharunam]

Well i need to check it, but i think its broken on the ATV build.
Since i dont use VPN i never check it.
But i will see if i can do something about it, but not promising nothing since him really full of work this days!

Thanks but I was using the atv build by mistake and should have been using the non ATV version. Thanks.

How do you get to move an icon from multiple apk;s to the main screen for just one apk that you use more often like kodi.

Thanks

[MurtiE]

Installed (finally) the rom this morning and now configuring it.
Xposed is a welcome addition. Thank you very much.


For new flashers (android that is) like me:

YOU WILL NOT NEED POWER CONNECTION TO FLASH ROM.
Note: For Windows 10 Make sure the USB burning tool is installed using the Windows 8 compatibility. Right click on the "Setup v2.0.x..." file and select the 'Troubleshoot compatibility' option and follow the instructions to make sure it is Windows 8 compatible and save the settings. This will help with having the USB burning tool recognize the box.

1. Run USB Burning Tool. To change to English select the second menu item from left at top and in the drop down you will be able to select 'English'.
2. Select the 'File' menu at top left of program window and select 'Import image'
3. Find the image file you unzipped/decompressed. For this example the file is 'SC-V1-BB2Pro-VorkeZ1.img'
4. Connect one end of the two sided male-to-male USB to PC usb port,
5. Hold down reset button by using a paperclip end in the small hole is on the back of the box near the input ports and then plug the other end of the USB cord into the box, release reset button (paperclip end)
6. The USB Burning Tool should recognize the box and and show it is connected in the top box area (mine displayed as Hub 2...) once connection is recognized/confirmed
7. Click on "Start" button on burning tool to begin flashing, Should complete in under 10 minutes.
8. When the program displays the flash is completed successfully, click "Stop" button on burning tool, disconnect USB from box.
9. Now you can connect the box to the TV hdmi, and plug in the power. Wait about 10 minutes for it to boot/startup and then you will be able to configure the box to your needs.

(adaptation of instructions provided)



I had messed up my device attempting to add SU to the stock rom in the first place. I could not recover the stock rom to flash to the device, however after using these instructions I was able flash this rom and get it to start up.
To do: establish SU, configure Play Store, install Xposed add ons, and other programs.

Hello,

Can i flash this with Burn_Card_Maker like this method: https://www.youtube.com/watch?v=YHRQ...92957781971768
Sorry that i cannot good speak.