NAND Chip Mask ROM Mode Short Location

[rajibprince]

[rajibprince]

I have bricked my device which is x96 mini but unfortunately it has s905x instead of s905w .Looking for short pins. Thanks a lot !

[ath156]

Hi Everyone !
A have bricked my device.Looking for short pins.Thanks a lot !
HK1 X3 4/32Gb S905X3

HK1 X3 is the same as H96 max X3. So short the 2 pins (gold )shown on the photo on the https://forum.freaktab.com/forum/tv-...ard-xyx_s905x3

[soldiaz]

Amazing, thank you! will try tonight. Thanks.

Update: Worked a treat! Thank you, unbricked and up and running with DaivietPDA's Rom ATV9 Android 9.0 For Amlogic S912. This rom also fixed my wifi issues too. Thanks soldiaz .

Could you share the rom ? I have x92 too LPDDR, kind regards

[dattila]

Hi Everyone !
A have bricked my device.Looking for short pins.Thanks a lot !
HK1 X3 4/32Gb S905X3

[Tumz8]

Easy 2 short since pins are reachable! Try pins within yellow marked area WHILE plugging device to PC

Amazing, thank you! will try tonight. Thanks.

Update: Worked a treat! Thank you, unbricked and up and running with DaivietPDA's Rom ATV9 Android 9.0 For Amlogic S912. This rom also fixed my wifi issues too. Thanks soldiaz .

[soldiaz]

Hi Everyone,

First post after reading through this thread. I have managed to brick an x92 s912 board is RoHS V2.0. I can't seem to find the short pin location...

Easy 2 short since pins are reachable! Try pins within yellow marked area WHILE plugging device to PC

[Tumz8]

Hi Everyone,

First post after reading through this thread. I have managed to brick an x92 s912 board is RoHS V2.0. I can't seem to find the short pin location or if I have, I still can see the device on-screen or on my pc. the chip is a sandisk not samsug if that helps also? spent quite a few days trying to unbrick. any help would be great. thanks,
?

[nikos17m]

TX9s

after a second failed attemp installing another rom via sd card I managed to connect it to pc and flash my previous firmware

but thanks for the picture if I will brick it in the future I will try this first

thanks again

...contacts should be closed ... ?

TX9s

[Rusun]

Hi, please help. what contacts should be closed here?

[nikos17m]

hello I soft bricked my TX9s

It boots but stuck on the boot logo and I can enter recovery

the last firmware was android 9 so the twrp is not 100% functional so when i tried to backup my old backup fromandroid 7 it soft bricked and now I cant flash it with usb burnning tools or even the sd card method.

I tried 2 different location that i found online for the short pin but neither of them worked

here is my board and I marked the location that i tried to short pin.

Any help would be great please

Thank you guys
Nick

[Emon]

Thank you very much. Mine worked as below.

... TX3 MAX (2/16GB) Amlogic s905W ... which two pins to be shorted? ...

source: forumXperience

[Emon]

I have bricked my TX3 MAX (2/16GB) Amlogic s905W while updating. I tried almost everything but nothing on the screen (Black). I have tried Amlogic burner with different image file but always the same error stuck at 7%

[0x32030201]Uboot/Get result/DiskInitial error

I want to short the nand pin. Could you please help to find which two pins to be shorted? Or any other suggestions to recover this box. TIA

PLEASE HELP ME!!!!! I am desperate.