NAND Chip Mask ROM Mode Short Location

[nikos17m]

Hello everyone
I manage finally to save my board.

short pin location is marked in the pic below
they are the 2 gold pins.

X96 Air (S905X3) NAND chip Mask ROM Mode Short Location, thread

[nikos17m]

hello guys

i recieved today my box and after trying some roms unfortunatelly my device is now bricked

where i should look for the short pin?
I am new to all of this

[amitsan]

First of all, thank you starting this thread to help noobs like me to revive their devices.

I have X96 Max X2 4gb+32gb tv box.
While upgrading its bricked. now not detecting in PC.

Can someone help me with nand pin location.

[Sama92]

did you find the pins to short,i have same problem.

have you managed to repair it?

[Scarface911]

I got a a95x f3 Air that doesn't boot (only red light), flashing stops exactly at 3%

[John26121981]

6-7 or 7-8 try.

Also tried that but it didn't work

[Sama92]

5 and 6

I have tried pins 5 and 6 but it has not worked for me, is it because my pc does not recognize my tv box? What solution could this have? Beforehand thank you very much

[kipir]

Help to bring MXQ Pro 4K back to life

Thank you for allowing me joing that great forum.
I really need your help to make my MXQ pro 4K comes back to live . Story started when the box was stoped working and didn't boot or even had its Led on . So I plug it into my lap top tring to use hrad reset by toothpick , OTG usb port and downloading the firmware for AMlogic (thinking thats the correct chipset for that type of boxes as shown on interent). But the burning tool couldn't see the box . So I guess the box has different chipset and my guess was right so I used the tool for Rockchip and downloaded two frimwares for trial. the first firmware was upgraded but the wifi wasn't working then when I try the second firmware the box totaly died no Led no detection on Rockchip tool. At the end I decided to open the box then was the surprice I found that the chipset is Toshiba I tried to short the pins but no luck . Please see attached photos for the mainboard so grateful if someone can help me to bring that box back to life.

6-7 or 7-8 try.

[kipir]

Hello everyone, could you help me find the pins of a magicsee n5 max amlogic s905x2

5 and 6

[Sama92]

did you find the pins to short,i have same problem.

Hi . unfortunately I could not revive my TV box and tested with all pins but my PC does not recognize it, it tells me an unknown device and I tested with several controllers but it still does not recognize my TV box

[Vicky_singh86]

Hello everyone, could you help me find the pins of a magicsee n5 max amlogic s905x2

did you find the pins to short,i have same problem.

[John26121981]

try this way

Thank you for reply I have tried that two pins but it didn't work

[giornistrani]

Try this guide to short (Hynix NAND) pins.

I tried pins 8 and 9 as shown, the tablet shows no sign of life :-(

[kipir]

try this way