NAND Chip Mask ROM Mode Short Location

[atacr]

This one is for X88 PRO 4G/64G (RK3318)

.:

[Zaky]

Can someone help me my ax96max plus was brick . I can find short pin for this device.

Done fix allready

[atacr]

Hi,
My H96 Pro+ (S912) bricked. please, help me for Nand shortcut pins

Thanks

Big Picture

https://www.kisa.link/OtYG

https://www.kisa.link/OtYH

[atacr]

Hi,
My WeChip v9 (S905x3) bricked. please, help me for Nand shortcut pins

Thanks

Big Picture

https://www.kisa.link/OtYJ

https://www.kisa.link/OtYK

[atacr]

help me please

which are pins for Mask Mod?

solved.

[atacr]

help me please

which are pins for Mask Mod?

[hall]

MXQ Pro+ 4k S905X with Samsung KLMAG2WEMB-B031. As below location and clip showing the process.

https://youtu.be/eh8eGbc2iOc

Need assistance with bricked Abox A1 Max .... the box shows red light and video output pulses to tv. It will not load from SD or USB to USB..... fails to connect to PC port.... (dead port) no
noise of connection. Here are the specs.... if someone knows where to short this board to trigger the port. That would be great!
Model Abox A1 Max
CPU: S905W
2gb ram 16gb memory
Board markings and information:
A95XA1 V3_2 topside


Pic link shows PC board both sides...

https://ibb.co/album/Jx5DSv

FOUND THE SOLUTION: Unbricked Abox A1 max >>> Here is a picrture of the locations to short. Use a mini test light with small blub for best results.

Ground on the circle in corner as shown in pic. Then touch other side of test light to the solder dots. While the burning tool is running with
your img file. It will connect and burn your img to the device. Cheers, hope this helps!

https://ibb.co/vvF0bsX

[nishantdawadi]

i flashed a zip to reboot to recovery an i got into bootloop, can any one point out the nand short pins for my board?
BOX: Cloudnetgo 4gltebox cm05g
BOARD: P212 S905x 1 G 16 G
Images are below:

https://ibb.co/9tmqnyN

https://ibb.co/Mkz7SMT

https://ibb.co/ZX5mLNQ

[atomc]

Hi, I bricked my TX3 mini, NAND chip SANDISK SDINADF4-16G, could someone show me which pins I have to short, thanks

Ben

[tosa12]

Nand shortcut pins for TX6 4x32

https://postimg.cc/Q9rqgMBh

https://postimg.cc/Mv47t7tb

For some reason i couldn't flush from usb, but had to do it from sd card. Same procedure put in sd card and while shortcutting plug in power cord.
Mine problem is that for some reason out of blue it goes blue screen and boot loop. Does anyone have any idea what might be a problem is there any way to check if emmc or ram is corrupted.

[optimusplus34]

hi guys i need help ,
i have a a95x max plus s922x chipset . i can not reset the box usb burning tool can not detect usb . i need the NAND Short pin . please please .

[CSilva]

Hi friends,
Does anyone know what pins I need to short to revive my board? It's an IntBox i7 and it has the Samsung KLM8G2FE3B chip.
Any help is appreciated because I'm about to throw it to the garbage

[paulvern]

I own a DQ6 rk 3318 4gb ram. Does someone know what pins to short?

[kbnsalem]

That's the image of the board. It's a MXQ9 5G, but the board is the All Winner H3 V3. Tried to flash, usb recognizes, the flash starts, but fails.

Here's the image: