NAND Chip Mask ROM Mode Short Location

[Luiz Octavio]

Can someone help me with the short spot of km6 deluxe mecool? Her light just turns on and off. Thank you

[Hotrod1]

X96 Max Plus 4gb 64gb successfully recovered
thankful to mr. matvxk for provide me details

Could I get you to share those details with me? I've got the same box and need to unbrick it.

[Sniper99]

Hi Anybody know witch pins short about nand chip mask in my case please?
-Device HP4105 / HP40A
-Amlogic S905X2
-Quad-core 1.8 GHz (ARM Cortex-A53)

https://www.mediafire.com/view/09lwpfv5ixtiv57/IMG_2672.JPG/file

[aligokpinar]

Burn_Card_Maker L(1041) Check uboot file after read failed...please help me..

[aligokpinar]

hello, please help me found the short pin for an x96 mini s905w..

thank you so much

[hudyj]

Hi. I can't upload any software to mecool K1 plus s905d. I have previously uploaded the software from the older s905 model and it is bricked. Does anyone know a way to reset the Samsung KLM8G1GETF-B041 memory?

[Ondra]

Hello,

my H96MAX stay bricked after ROM update. Now is in MASKROM mode and I cant do nothing..
Anybody help me locate pins to reset NAND CLK, to switch loader?
Thanksfor any help.

images:

https://imgur.com/a/YJshwIq

[BangJack]

I have HX1MAX device with Rockchip RK3318. I want to upgrade my firmware on my device. I use rkbatch tool but it gone failed. Now, my device bricked. It wont be detected on my computer. Which one that I should be pinned.

[strangehero]

hello gudday my a95x f3 air 4gb 64gb suddenly not booting up, and no notification light on the device and no hdmi output in the led tv.. i try to reset it in the av hole but nothing happens.. the processor is amlogic s905x3.. how to locate the short 2 pin method to this motherboard.. thank you so much.. the image are indicated.

[Sameer9793]

hello i got my tanix tx3 max bricked it has amlogic s905w in it and the chipset is


CS_905W_TX_2C_V1.1

sorry for no pictures of my box i dont have a available camera right now

can anyone tell me which nand pins to short to get my box recoved by amlogic usb burning tool

[vlad1mir]

Hi mAtvXk, thanks for the reply. The two copper pads did not work. I tried to the best of my abilities to have good contact but it was not detected by the Amlogic tool. I tried both of the USB (2.0 and 3.0) ports on the device and both did not work.

Try with two copper dots, make sure that you have good contact.

[vlad1mir]

Hi all,

I have a T95 Max+, S905X3 processor, 4GB RAM and 32GB internal storage. I managed to brick it while booting up with Emuelec. I made it work before but I don't know what caused this issue. I tried pressing the reset button to enter recovery mode but it did not work. I am hoping that the mask ROM mode will work out. I've attached pictures of my board. Any help would be appreciated, thanks.

Full size images:
Front - https://i.imgur.com/iXt1NbU.jpg
Back - https://i.imgur.com/Na9s3pD.jpg

[SakiCZ]

can you note exactly point short by picture....for everybody need.
that's important problem
thank somuch!

sorry, I presumed that I will see pop up window "new device" in the right corner of laptop screen, so I tried to short pin it while watching very important game of IIHF ice hockey world championship. Loud room at the moment. So I've missed the tudu sound when it was finaly connected. However I tried with needle and wire only in marked area, so no much options to try.

[phankhanh86]

to soldiaz, thank you for your effort !! I was able to do it just hour ago.
Thanks to this topic of the forum I gathered info, tiped out exact same location you marked, and follow procedures to complete succsses.
So thank you and others for crusial informations and guidance.

Venz v12 Ultra SOLVED. Short pin in the area marked by soldiaz, exactly I do not know.

for upload the stock firmware is needed to first import img file into AML Burning tool and press Start button only then plug in USB into box.
Box must be unpluged from power source, must be used only USB port closest to the back side of the box and reset button must be pressed, only like this it goes errorless till 100%.

can you note exactly point short by picture....for everybody need.
that's important problem
thank somuch!