MOV Z69 2GB RAM 16GB ROM rooted firmware?

[Guest]

Ok..... didnt work!.

I dont know why. I conect the tvbox in port otg - PC (i am using a usb cable normal, 3.0, Type A.... this is the problem? the cable has to be OTG too?). When i conect the tvbox, boorining tool recognice mi device, and Star...but when tvboc load all, it turn on, and disconect to mi pc..... so, i cant flash it......

Any idea?

[neomode]

Easy yes.

1: Start USB BURNING Tool
2: Select the Image you want to Flash
3: Then Select on the Right Side under Configuration Erase Flash / Normal erase / Erase Bootloader / Reset after success
4: Press Start
5: Now Connect the USB Cable to the Box, now Burning should start. ( Don´t Power Up the Box before or connect Power Cord!)

Neomode

[Guest]

Yeah! I push star before to conect device... It begings ok, but.... in 2%, stop with error.... I put image

[neomode]

Possible Wrong Image.
Also, try to connect power quick after flash begins.

Neomode

[Guest]

Same error....

Mi tvbox never turn off... when y push OFF, the device turn off, and inmediatly turn on..... maybe..thie is the probkem?

[neomode]

You have not to connect the Power Cord!
Only USB Connector.

Neomode

[Guest]

YEs. I tryed with and without power cord.... same problem.... This cause is... mi tvbox never is turn off... I cant conect usb with the turn off and the power cord pusted becasue i cant turn off with the power cord. Always reboot when i turn off.... I cant flash it ... ¿?¿?

[neomode]

Sorry, i think I lost the Draw here.
When you unplug all wires from your Box the Box is off right?
Then only Plug in the USB Cord for Flash and press Power on Button.
What is your native Language?

Neomode

[Guest]

Spanish.... soory for my english.....

My tvboc havent power button... It turn on automatically when i plug the power cable.

If i prepare burning tool, all is correct. Then, I plug USB (only usb) in otg port, the burning begings, but in 2% stop, and gives me error 10105002 .... like the image..

[neomode]

Vale, entiendo.
No conecte el cable de alimentación mientras intenta encender la caja.
La conexión necesaria es el cable USB.

Saludos
Ray

[Guest]

Vale, entiendo.
No conecte el cable de alimentaci�n mientras intenta encender la caja.
La conexi�n necesaria es el cable USB.

Saludos
Ray

Don't work.... :'(

Enviado desde mi Redmi Note 3 mediante Tapatalk

[neomode]

Then you need a different Images for Flash.
Let me check for you.

Neomode

[Guest]

But... Other user work it..... I think the my tvbox is damage... Because reboot always and don't allow flash image...I think

Enviado desde mi Redmi Note 3 mediante Tapatalk

[neomode]

Try to locate a reset button. Either a small hole or inside AV Port. Press it and plug in USB cable and release it. Neomode

[Guest]

Ok. this button exist. But it is like push turn off in remote control. When I push it, show "shout down" in screen. But if I push ok, don't turn off, but reboot, always reboot. I tried push this button a few seconds... Buy nothing happened... Omg, I think I won't get it... . I'll record a video...

Enviado desde mi Redmi Note 3 mediante Tapatalk