MOV Z69 2GB RAM 16GB ROM rooted firmware?

[gatos814]

Thanks about info!

This firnware is based on Marshmallow or Nougat?

Marshmallow !

[Just_nick-s]

but in my case i take safety pin and swap it from left to rite on my mentioned yellow line while connected my device on my pc through usb male to male cable on my device otg port and running usb burning tool started.

firmware Z69 2gb/16 download :
https://onedrive.live.com/?cid=46126...HrjCagwVd3kcRM

[trebor]

Thanks for the post of the under side

[scooter2014]

Think he confused as none 8/9 doesnt exsist.

NICE ADD TO NAN THREAD LOL NOW I CHECK 3/32

[Paletas69]

I need help. My box is bricked. Blue and red light.
how can I solve? Can someone explain to me how to do step by step? thank you very much!
my box is Z69 2/16

[Paletas69]

I can not do anything. light blue and red! the part that speaks of pins 8 and 9 I am in doubt if I remove the pin or if I make contact with the 2 pins. Could anyone help me?

in the image above it looks like pin 9 has been removed and then connects with pin 8 will it?

i´m conect box to pc via otg cable usb and pc not recognize. i´m open usb burning tool conect box with usb cable and press reset button and nothing happens.

[digitalriver]

I need help.

Usually I uses 2 and 3 pins. Try to change usb-cable, try another firmware. because this box have two(or more) different boards. Try another method for flashing(microsd card)

[Paletas69]

but what do I do to the pins? do I remove or contact them?

[digitalriver]

but what do I do to the pins? do I remove or contact them?

of course, contact them.
Short with a needle, and connect to PC. The pc must see your box. When flashing is starting - remove needle.

[gatos814]

Paletas69
I used 8 & 9 pins and this Z69-2017516 firmware
Good luck!

[Paletas69]

thank you guys! I unlocked the box but the problem remains must be box breakdown. it freezes and hangs constantly.
but I already contacted the gearbest and they returned the money and I was stuck. Does anyone have any idea what the malfunction might be?

[gatos814]

thank you guys! I unlocked the box but the problem remains must be box breakdown. it freezes and hangs constantly.
but I already contacted the gearbest and they returned the money and I was stuck. Does anyone have any idea what the malfunction might be?

Now that you had give your tv box ''live'' try one of these roms : https://mega.nz/#F!l91hBaLI!C8s75tqNZFLoVWTVqgsAbA

https://mega.nz/#!WVEmiDaZ!IP33_IxCtNWQqOu6b5IeptgRYQT1BUC3m-gUoRwTuwA

Good luck!

[scooter2014]

Its software related. Having a bit of issue getting time to finish 6 rom. But got it at least running smoother going to try few other things but once the devs get a similar base rom that dosnt look at ram config as the 3 gig model wont run any of the stock or custom 2 gig firmware so kinda in a nich that not much out thrre yet. Hope better firmware coming from manufacture. I dont have the 2 gig device but if i did id be trying the firmware for those devices to find best one. But cant test what i dont have.

[Shimon]

So, how does the 2/16 version fare with later FW's and is it worth buying presently?

[Jancales]

So. Finally I turned on the bluetooth on last xtmod firmware(XTMOD_EX_P_27bis).
https://mega.nz/#!z9dgDQBQ!kg_mKeOYT...EyfhLh1Dmw0OoQ
These files you must put to correct folders with correct permissions.


All works fine, sound transmission is not breaking, mobile phone connecting, file transmit working
P.S When you replacing libhardware.so and libhardware_legacy.so - the box is restarting. dont worry its ok

digitalriver Can you please explain which rom you used, I assume it is the Xannytech, and in which folders with which permissions to put those files please.


Edit : While reading further in the thread I discovered my question was already asked and answered.

Has anyone tried this mod on other ROM's ?

[Jancales]

Yes, I know, this was my post This fix for XannyTech firmwares, and I dont know, if this scheme works in other roms. So:
Permissions: all folders must be 755, all files - 644.
Destination:
app - must move with replacing to:/system/
etc - must move with replacing to:/system/
lib - must move with replacing to:/system/
I think it's not very difficult? )) for correct moving you must use correct explorer with root accses, for example - ES Explorer PRO(with enabled ROOT in his settings). I recommend move folders in course.
1. First move "app" with content. Check moving, check and(or) change permissions of files and folders.
2. Second step - move "etc" with content. Check moving, check or change permissions of files and folders.
3 Third step - move "lib":
3.1. first move "hw" and "rtkbt" folders with content, check moving, check or change permissions of files and folders.
3.2. And last step: move only files in "lib", because when you moving libhardware.so - the box go to restart.
3.3. After restarting change permissions of files from last step, restart againe and try to enable bluetooth

I can confirm that it also works on Superceleron rom