Scishion V88 (RK3229 1G/8G) Android TV Rom

[ulas12]

Hello,
I would like to thank
@zhongx @SpecTek for the rom
superceleron for all works and FTMC added to my rom
bluesmanuk f1riv tacotime82 for DRM
alienpearl for tutorial to add AndroidTV
@4PDU forum
@FREAKTAB forum

I'm french and i make a rom for french TV software.
Explanations are in French here:
http://www.planetenumerique.com/foru...=63&p=109#p109

Rom here:
https://mega.nz/#!4nYTSaIJ!e535QdPrO...l-2PgISgwFJh9U

Home button don't work, anybody can help ??????

Enjoy

error loading and not loading

model:V88 4k
motherboard : XT-MX4VR-V01

[suppenkasper]

Any Updates or could someone conclude what's working with V88 1GB/8GB Models anymore?

[p22h]

Hello

I need help to install the firmware of the tv box scishion v88 mars (1gb ram and 8 gb rom), black board with two usb and 1 hdmi inputs).

Problem firmware information:
rk322x_box7.1.2 / NHG47K / quiaohy1211615

I am performing the procedure by usb / usb male cable. Recognizes the usb input, but does not reach the "ibp" step. I tried several firmwares ... could I suggest proper resolution and firmware?

[CaptainBenSisko]

Hello

I need help to install the firmware of the tv box scishion v88 mars (1gb ram and 8 gb rom), black board with two usb and 1 hdmi inputs).

Problem firmware information:
rk322x_box7.1.2 / NHG47K / quiaohy1211615

I am performing the procedure by usb / usb male cable. Recognizes the usb input, but does not reach the "ibp" step. I tried several firmwares ... could I suggest proper resolution and firmware?

Are you trying to install stock firmware or THIS custom firmware?

[CaptainBenSisko]

Can someone point me in the right direction to get wifi working? I flashed this rom to a Nexsmart D32 (rk3229) box.

[p22h]

Are you trying to install stock firmware or THIS custom firmware?

Hello ,
I could not get the firmware stock (original - rk322x_box7.1.2 / NHG47K / quiaohy1211615).

I tried several other firmwares of rk3229, several versions of android.

I used firmware of other models of the v88 schiscion (mini v88, v88 4k, mars II, v88 plus and other tv box with rk3229)

My tv box is model m88 v88 and not v88 mars II.

The usb / usb cable is recognized by the pin method (5 and 6, also by 8-9), because the tv box does not start, it only has a red led front.

Would you have a successful or compatible firmware for the tv box v88 mars 1 g ram 8 gb rom?

TV box description:

Geral
Marca	Scishion
Modelo	V88 Mars
Tipo	Caixa de TV
Sistema	Android 7.1
CPU	RK3229
N?cleo	1.5 GHz
GPU	Mali-400
RAM	1G
RAM Tipo	DDR3
ROM	8G
Max. Capacidade Estendida	TF cart?o at? 32 GB (n?o inclu?do)
Armazenamento
M?dia Suportados
Decoder Formato	H.265, H.264
Formato de v?deo	H.265, H.264, AVI, MKV, MP4, WMV, RM, VC-1, DAT, VP8, 4 K, VP9
Formato de ?udio	RM, AAC, MP3, OGG, WMA, FLAC
Formato da foto	JPEG, PNG, JPG
Suporte 5.1 Sa?da de Som Surround	N?o
Detalhes do produto
Fonte de Alimenta??o	Adaptador de carga
Interface	HDMI, USB2.0, AV, cart?o do TF, RJ45, DC 5 V, SPDIF
L?ngua	Multi-idioma
Suporte DVD	N?o
HDMI Vers?o	2.0
Externo Legendas Suportados	Sim
RJ45 Velocidade da Porta	100 M
Informa??es de Firmware
Sistema Bit	32Bit
Chips wi-fi	6051 P

[CaptainBenSisko]

Hello ,
I could not get the firmware stock (original - rk322x_box7.1.2 / NHG47K / quiaohy1211615).

I tried several other firmwares of rk3229, several versions of android.

I used firmware of other models of the v88 schiscion (mini v88, v88 4k, mars II, v88 plus and other tv box with rk3229)

My tv box is model m88 v88 and not v88 mars II.

The usb / usb cable is recognized by the pin method (5 and 6, also by 8-9), because the tv box does not start, it only has a red led front.

Would you have a successful or compatible firmware for the tv box v88 mars 1 g ram 8 gb rom?

TV box description:

Geral
Marca	Scishion
Modelo	V88 Mars
Tipo	Caixa de TV
Sistema	Android 7.1
CPU	RK3229
N?cleo	1.5 GHz
GPU	Mali-400
RAM	1G
RAM Tipo	DDR3
ROM	8G
Max. Capacidade Estendida	TF cart?o at? 32 GB (n?o inclu?do)
Armazenamento
M?dia Suportados
Decoder Formato	H.265, H.264
Formato de v?deo	H.265, H.264, AVI, MKV, MP4, WMV, RM, VC-1, DAT, VP8, 4 K, VP9
Formato de ?udio	RM, AAC, MP3, OGG, WMA, FLAC
Formato da foto	JPEG, PNG, JPG
Suporte 5.1 Sa?da de Som Surround	N?o
Detalhes do produto
Fonte de Alimenta??o	Adaptador de carga
Interface	HDMI, USB2.0, AV, cart?o do TF, RJ45, DC 5 V, SPDIF
L?ngua	Multi-idioma
Suporte DVD	N?o
HDMI Vers?o	2.0
Externo Legendas Suportados	Sim
RJ45 Velocidade da Porta	100 M
Informa??es de Firmware
Sistema Bit	32Bit
Chips wi-fi	6051 P

If you could walk me through, step by step, what you are doing, what software you are using to flash, what drivers you have used, etc.. I may be able to help you.

-Captain Ben

[p22h]

hello captain
the problem started with android locking in the logo, then I went to perform an update via sd card and the tv box does not start anymore, it is only with the red led very weak access.

I tried several firmware and no success.

I perform the following procedures:
1 - connect usb / usb cable;
2 - I open the USB port by the pin method,
3- After recognizing the port, I insert the firmware into the software, RKBatchTool-v1.8 (with assistant installed)
4 - firwmare is inserted in RKBatchTool-v1.8 and I click on update or upgrade,
5- most common error in test device,
6 - When it passes the test device, error appears in idb, fail.

I tested several USB cable / usb, I tested the software AndroidTool_Release_v2.51, without success.

tx box v88 mars, android 7.1, 1gb ram and 8gb rom

Is there a solution? will the firmware or the drives, I use windows 10 for procedures.
I'm also renaming the ISOs to "update" and putting them in the C: directory, with no spaces in the folder names and files.

sen: log error:
**********Restauracion Iniciada**********
**********Restore Start Total<1>**********
<Layer 1-1> Download Boot Start
<Layer 1-1> Download Boot Success
<Layer 1-1> Wait For Maskrom Start
<Layer 1-1> Wait For Maskrom Success
<Layer 1-1> Test Device Start
<Layer 1-1> Test Device Fail
**********Restauracion Completado<0> Fail<1> Time<46843>ms**********

[p22h]

placa XT_MX1VB_V10

2.3.62.105 MX1VB1000R

[CaptainBenSisko]

placa XT_MX1VB_V10

2.3.62.105 MX1VB1000R

It appears as though you may have made contact a little to hard with the pins. Try GENTLY scraping (with a razor preferably) in between the pins you have shorted to make sure none are making contact with eachother.

After that clean all the pins. Connect your device to your computer and get whatever software you are using to recognize the device. Load the STOCK firmware for your device (whichever came with the box when it shipped) and start the RESTORE process (NOT UPGRADE)

Then gently roll a cross tip or Phillips head screwdriver (smallest possible) between every pin on the NAND. You should be hearing your device disconnect and reconnect through the notification sounds.

I hope by doing this, you can revive your board.

If all that fails, read all of this again and try again.

If all THAT fails again, try every single version or Android Tool and Rockchip Batch Tool you can. Also make sure it is the ORIGINAL firmware the box shipped with.

Good Luck and Godspeed

-Captain Ben

[CaptainBenSisko]

I have put together a pack of tools for Rockchip Devices that you all can try to use to succeed. Download them Here.

Good luck and Godspeed.

-Captain Ben

(Big Shoutout to Gefattern for the collab)

[p22h]

hello captain

I still continue with "prepare idb fail" error.
image::: I used the tool rkdev, first I used advanced functions, unpack firmware, then in downlaod image in rkdev, I put the address of the files, only the first "loader" does not advance and an error occurs.

would you know to tidy up?
I found a video of a Chinese ou russo, talking about this fix .... but I can not download it ... (Firmware_Rkbatchtool_Load_Failed.zip)

... follow link from the video: https://youtu.be/VyOs0SuPyBs

how to fix this "prepare idb faill" problem

[gefattern]

Hi , the Tool inside Video is a HuaweiPhoneTool , dont think this is useful for RK "prepare IDB /download IDB" Bugs , my UT3 has the same / gefattern

[CaptainBenSisko]

hello captain

I still continue with "prepare idb fail" error.
image::: I used the tool rkdev, first I used advanced functions, unpack firmware, then in downlaod image in rkdev, I put the address of the files, only the first "loader" does not advance and an error occurs.

would you know to tidy up?
I found a video of a Chinese ou russo, talking about this fix .... but I can not download it ... (Firmware_Rkbatchtool_Load_Failed.zip)

... follow link from the video: https://youtu.be/VyOs0SuPyBs

how to fix this "prepare idb faill" problem

Make sure you tried everything I said perfectly.

Try this firmware.

https://www.entertainmentbox.com/scishion-v88-tv-box-lollipop-5-1-1-stock-firmware-download/

Make sure you clean the grooves between the pins to make sure they aren't touching.

Try every version of RK Batch Tool and AndroidTool.

Run down every pin until you find one that works.

-Captain Ben

[TheBlackening]

hello captain

I still continue with "prepare idb fail" error.
image::: I used the tool rkdev, first I used advanced functions, unpack firmware, then in downlaod image in rkdev, I put the address of the files, only the first "loader" does not advance and an error occurs.

would you know to tidy up?
I found a video of a Chinese ou russo, talking about this fix .... but I can not download it ... (Firmware_Rkbatchtool_Load_Failed.zip)

... follow link from the video: https://youtu.be/VyOs0SuPyBs

how to fix this "prepare idb faill" problem

Hello p22h.

Have you tried different usb ports on the box and different usb ports on your computer?
also have you tried using another computer or maybe a different version of windows?
a different USB cable.
Maybe some of those helps.

I have a H96 box also with the Rockchip 3229, but i don't remember wich wifi chip it's in there.
I was having problems with the original ROM (it was slow) so i tried several ROMS and found one from leelbox that works perfectly. Maybe you want to try flash it through mask mode Process.
Here is the link, there are android 6 and 7 Roms in the link,i hope it helps.

https://chinagadgetsreviews.com/download-android-nougat-7-1-2-firmware-for-leelbox-q1-tv-box.html

One time i tried the firmware for a Tanix TX2 on my H96 and it completely bricked the box, i had to start it in Mask Mode to be able to flash another compatible firmware.
If you are feeling adventurous, you can try the Tanix TX2 ROM.

I wish you good luck

[CaptainBenSisko]

Hello p22h.

Have you tried different usb ports on the box and different usb ports on your computer?
also have you tried using another computer or maybe a different version of windows?
a different USB cable.
Maybe some of those helps.

I have a H96 box also with the Rockchip 3229, but i don't remember wich wifi chip it's in there.
I was having problems with the original ROM (it was slow) so i tried several ROMS and found one from leelbox that works perfectly. Maybe you want to try flash it through mask mode Process.
Here is the link, there are android 6 and 7 Roms in the link,i hope it helps.

https://chinagadgetsreviews.com/download-android-nougat-7-1-2-firmware-for-leelbox-q1-tv-box.html

One time i tried the firmware for a Tanix TX2 on my H96 and it completely bricked the box, i had to start it in Mask Mode to be able to flash another compatible firmware.
If you are feeling adventurous, you can try the Tanix TX2 ROM.

I wish you good luck

Hello! Great tips. He did say he is getting the computer to recognize the box however and is also getting it to flash to the point where test device is failing, idb load failing.. etc..

This is a problem with the Nand itself and can likely be solved if you follow my tips above.

Godspeed

-Captain Ben