H96 MAX RK3399 Tv Box 4/32GB

[RicardoBR]

Hi ,

this sounds like a Problem with the Drivers are they installed and what Drivers did you use ??? ,

and which Windows Version do you use ??? please report . (as possible use Win7/64bit)

greetings / gefattern

I tried on windows 10 64bits and windows 7 32bits,
none worked, I installed Driverassistant v4.5

[gefattern]

I think I did not explain very well, the box connects to the pc but it keeps warning that it is malfunctioning without stopping, and I listen to the sound of windows when it connects, and the sound does not stop.
Anyway, I'm sorry for the inconvenience, thank you.

Hi ,

this sounds like a Problem with the Drivers are they installed and what Drivers did you use ??? ,

and which Windows Version do you use ??? please report . (as possible use Win7/64bit)

greetings / gefattern

[RicardoBR]

Hi ,

that is not correct , if your Box is connected in MRM to PC it is already recogniced by PC ,

you only have to press Upgrade/Restore in Flashtool , simple as usual .

greetings / gefattern

I think I did not explain very well, the box connects to the pc but it keeps warning that it is malfunctioning without stopping, and I listen to the sound of windows when it connects, and the sound does not stop.
Anyway, I'm sorry for the inconvenience, thank you.

[gefattern]

please look on YouTube how to do it

[gefattern]

I did everything right, I entered the maskrom mode, but even then the pc does not recognize the box

:'(

Hi ,

that is not correct , if your Box is connected in MRM to PC it is already recogniced by PC ,

you only have to press Upgrade/Restore in Flashtool , simple as usual .

greetings / gefattern

[RicardoBR]

Hi ,

first do you want to fool me , if you can translate to ENGLISH it is no Problem to translate back to your language , otherwise get a Friend ,

with Brain , to help you , use a thin bendable cupper wire or similar . If you know how you bring your Box to MRM , just do it and flash .

If your Box is already in MASKROMMODE you only have to press on the FLASHTOOL / UPGRADE / RESTORE , really cant understand why

you are not able to do a simple Thing like that . Search for YT Videos that you can see .

Hint : i am only a User shows you the right direction , the rest you have to do .

good luck / gefattern

I did everything right, I entered the maskrom mode, but even then the pc does not recognize the box

:'(

[gefattern]

i exactly understand , but YOU NOT , u can not put one end to point A and the other to point B & then connect the Box to flash it ???
then really NOBOBY can help you , with a simple thing like that .

[RicardoBR]

Hi ,

first do you want to fool me , if you can translate to ENGLISH it is no Problem to translate back to your language , otherwise get a Friend ,

with Brain , to help you , use a thin bendable cupper wire or similar . If you know how you bring your Box to MRM , just do it and flash .

If your Box is already in MASKROMMODE you only have to press on the FLASHTOOL / UPGRADE / RESTORE , really cant understand why

you are not able to do a simple Thing like that . Search for YT Videos that you can see .

Hint : i am only a User shows you the right direction , the rest you have to do .

good luck / gefattern

I think you did not understand what I meant, the only thing I need to know is the position of the wire, how should I position and touch it

[gefattern]

I can not do the translation of what you said, but I know how to do the maskrom, it's easy, but the pins on my board are different from the others, they are two pins, I do not know how to do both at the same time

Hi ,

first do you want to fool me , if you can translate to ENGLISH it is no Problem to translate back to your language , otherwise get a Friend ,

with Brain , to help you , use a thin bendable cupper wire or similar . If you know how you bring your Box to MRM , just do it and flash .

If your Box is already in MASKROMMODE you only have to press on the FLASHTOOL / UPGRADE / RESTORE , really cant understand why

you are not able to do a simple Thing like that . Search for YT Videos that you can see .

Hint : i am only a User shows you the right direction , the rest you have to do .

good luck / gefattern

[RicardoBR]

Hi ,

nearly the same Way as flashing , short Pins , connect USB , connect Power , wait for MaskRomMode & flash your Box .

good luck / gefattern

I can not do the translation of what you said, but I know how to do the maskrom, it's easy, but the pins on my board are different from the others, they are two pins, I do not know how to do both at the same time

[gefattern]

Mine is the same, I already found the pins, but I do not know what to do now, how do I do it? Help me please, I'm desperate.

Hi ,

nearly the same Way as flashing , short Pins , connect USB , connect Power , wait for MaskRomMode & flash your Box .

good luck / gefattern

[RicardoBR]

contact closure.

Mine is the same, I already found the pins, but I do not know what to do now, how do I do it? Help me please, I'm desperate.

[RicardoBR]

Hello, I'm Brazilian and I do not understand English but I'll try to communicate with you through google translator. I hope you can understand me and help me because I am desperate
I bought a H96 max in the gearbest, apparently it arrived good but it gave a few brakes and it did not return more, only withdrawing of the outlet, in one of those withdrawals of the taking it remained in the looping and does not leave the screen of initialization. I try to start it by the reset button, it takes a lot longer than normal but it starts anyway, but it starts with a message in the corner written "Supported API 3" I try to reset it from the factory, it takes a lot, almost 1h and when it finishes nothing happens and it continues in the looping. I already tried to connect in the pc I installed the drivers but even so, nothing appears when I connect to the pc.
did you get it? (Google translate Portugues to English)

[Canada Lee]

I have a H96 max with stock Android 6.0.1 firmware dated 20170525, and I have a few problems i'd like to sort out on it if anyone has advise how to remedy.

The 3 main problems are...

Any app that has accessibility services, like for example Tasker, will not show their accessibility services in Settings > Accessibility. It just says No services installed. So for Tasker, I cannot enable the Accessibility Service for it.

Next is Daydream. It doesnt work. And I dont mean the WHEN TO DAYDREAM etc that others dont know about, I mean if I go to Settings > Display > Daydream, I have a choice of Clock, or Photo Frame etc...but it does not matter which I select, my selection is not remembered... If I select Clock, the radio button shows I have selected it...if I go to the overflow (three dots) and select Daydream NOW, nothing happens.

Also, if I select Clock, and then back out just to Display, and go back into Daydream immediately, whichever daydream I selected, is unselected. Or better put, no daydream in there is selected, and it does not matter which one I choose, if I back out and go in there immediately, none are selected...if I select one of them and hit the COG beside it, I do get the settings for that daydream, but if I select one and try to preview the daydream NOW, nothing happens.

I am wondering if its a permission problem. I went into Settings > Apps and then the COG to check permissions, and the one I am checking out is Allow to Modify System Settings...for other apps, I am able to toggle that either on or off...but for Basic Daydream it is off and I cannot enable it, if I click on the slide button it just highlights grey and stays off.

I am wondering if it needs that permission... or if any of its files have the wrong permissions, I think the folders in System/Apps are all 755, and the files are all 644 (if I remember correctly), and their owner are all 0 (root)


Another thing I am trying to get sorted is, Print Services...dont have the option in Settings, but if I put PrintSpooler in /system/apps, and I add a line of text (off the top of my head) something like "<permission>"com.android.print" into box-core.xml file in the /system/etc/permissions folder...the box-core-something.xml file already existed there, could have been handheld-core-something.xml, but just having the printspooler didnt show Print Services in settings, but adding that permission made it show up in settings.

But settings force closes when I go into print services, prob need a library file, if so where from?

Anybody out there have solutions to these probs?

Thanks in advance!

[Wyle]

I do not recommend any of these square boxes, the cooling of them is lousy! I recommend buying one that is of good quality and cooling so do not get headaches!
http://www.geekbuying.com/item/R-TV-...OX-376285.html

I don't know if I will ever do business with GeekBuying ever again - I ordered the H96 MAX 4G/32G and paid $20 extra for the DHL 3-Day Delivery service from China and you wouldn't believe the issues I've had.

Let's put it this way - After I made an account with them, Filled out all MY ADDRESS info.... What did they put on the Shipping label? Just MY Name and the NAME of my Company - NO STREET ADDRESS, NO City or STATE and NO ZIP CODE.

I'm lucky to have included my PHONE Number on the order. The Driver CALLED ME after he went to a DIFFERENT TOWN with a similar company name trying to locate me.

If I could I'll include a photo of SHIPPING LABEL... I can't believe a big place like GEEK BUYING would not put an address on a label... Especially on an order for INTERNATIONAL SHIPPING! (and charge $20 EXTRA, Too!)

Oh, and the 3 Day shipping.... They took about 4 days just to ship it out. I got it about 10 days after I made payment. I might as well have opted for the FREE shipping!

I may have saved $20 compared to buying it from an E-bay seller but at least those shipments were insured by the seller - I had to pay for insurance on Geek Buy. Plus, I've never had shipping labels on E-bay shipments missing my ADDRESS info like this. Buy from them and take your chances! Make sure you at least pay for the shipping Insurance!