MECOOL M8S Pro + TV Box Amlogic S905X Android 7.1 2/16GB Fast Lan, WiFi 802.11b/g/n

[P.X]

Auto frame rate fix needs for spmc/ftmc but there an other function in the app: auto frame rate enable/disable. As I know it's working with kodi/mxplayer other 3rd party apps.

Yes - Just checked
- Auto frame rate: it can be enable/disable the auto frame rate of the system (it can be work with other app (eg: mxplayer, not only from spmc/ftmc)

[smrtprjcts]

So you must have SPMC 16.x installed then, because auto frame rate doesn't work in Kodi, as is stated in the thread of this app.

Auto frame rate fix needs for spmc/ftmc but there an other function in the app: auto frame rate enable/disable. As I know it's working with kodi/mxplayer other 3rd party apps.

[P.X]

So you must have SPMC 16.x installed then, because auto frame rate doesn't work in Kodi, as is stated in the thread of this app.

What is SPMC ??

I just have Kodi as far as I know - Haven't done anything special as far as I remember ...

EDIT: Looked up SPMC - Not installed that - Just std. Kodi 17.6
Definitely working for me - TV Info shows 24P

[Jancales]

AND ... so

With Auto Refresh rate set in Amlogic Tool

Repeating yesterdays temp tests (default 60Hz refresh rate) where Temp was ~78C the Auto Refresh Rate option seems to have helped keep the temps down.
CPU is not running full Hz and % load is lower too.

Ambient 18°C
Kodi 4K File DD5.1 - 24P Auto Refresh Rate ~63°C (varying 62-64 mostly 62)

So you must have SPMC 16.x installed then, because auto frame rate doesn't work in Kodi, as is stated in the thread of this app.

[P.X]

Some discussion on OEM vs Custom FW temperatures over in the Magendanz ATV ROM Thread is quite interesting but is a bit off topic so I thought I should bring it over here ...

Discussion starts somewhere round here ...

http://freaktab.com/forum/tv-player-support/amlogic-based-tv-players/s905x/others-aml-s905x/firmware-roms-tools-bx/659305-rom-mecool-m8s-pro-tvstock-nexus-rom-android-tv-7-1?p=698887#post698887

Hello, any kernel with overclock capability? I see this box is limited to 1.5GHz but the S905X is capable to 2.0GHz

nice rom by the way, thanks.

They limit it to 1.5GHz to reduce the risk of over heating, and even then it runs hot, so what you think will happen at 2.0GHz?

and goes on via interesting Temp testing discussions and various cooling options ... to these posts

Hi!
I added a new feature (MMC Info) into the Amlogic tool v1.0.19.
I hope it makes it easy to identify the problematic boxes.

Please contact me if you have any useful info for development/fix.
Thanks

Great
Good to have the eMMC check built in.

Never really tried to get auto frame rate to work but tried manual and my Amp rejected 24p mode
but ... Turned on Auto in your app and works a treat
Many thanks

AND ... so

With Auto Refresh rate set in Amlogic Tool

Repeating yesterdays temp tests (default 60Hz refresh rate) where Temp was ~78C the Auto Refresh Rate option seems to have helped keep the temps down.
CPU is not running full Hz and % load is lower too.

Ambient 18°C
Kodi 4K File DD5.1 - 24P Auto Refresh Rate ~63°C (varying 62-64 mostly 62)

[P.X]

Did anyone of you experience the issue, that the HDMI output isn't working?
I got my Mecool M8S Pro+ today, treid to start it but I saw no picture on my TV so I tried a different TV, my PC display and different HDMI cables. Nothing worked, so I connected the box via an AV cable and now I got a picture but of course a crappy resolution. So I installed [ROM] Mecool M8S Pro+ TVStock Nexus ROM (Android TV 7.1) as an OTA update from a USB drive.

But after installing and booting up I'm still only able to get a picture via the AV cable.

Any thoughts on this?

Edit:
Yeah, looks like the HDMI Cable was not in deep enough. Now it works. Didn't know that I had to push it that hard.

Yeah - Was just going to post (read this yesterday before your edit) that I had the same thing and found that the HDMI was not in fully - looked and felt fully inserted but a firm push seated it in about 1mm more !

[jemus]

Did anyone of you experience the issue, that the HDMI output isn't working?
I got my Mecool M8S Pro+ today, treid to start it but I saw no picture on my TV so I tried a different TV, my PC display and different HDMI cables. Nothing worked, so I connected the box via an AV cable and now I got a picture but of course a crappy resolution. So I installed [ROM] Mecool M8S Pro+ TVStock Nexus ROM (Android TV 7.1) as an OTA update from a USB drive.

But after installing and booting up I'm still only able to get a picture via the AV cable.

Any thoughts on this?

Edit:
Yeah, looks like the HDMI Cable was not in deep enough. Now it works. Didn't know that I had to push it that hard.

[P.X]

Just notice there is a 20/12 update on the blog.

Edit: while its says 20/12 update it is the 24/11 update. What a mess.

http://blog.geekbuying.com/2017/12/m...date-20171220/

1220 (or 20/12) is their date for the blog post, not to do with the FW build date as far as I can tell .... tis confusing though !

[Jancales]

I'm downloading the 24/11 firmware right now, comes in at snail pac estimated 2 hours, but I'm a bit worried that the actual update should be 28/11.

The firmware is definitely Android TV, as you can notice from the apps that are not available in Playstore, but don't know why they use standard launcher

Just notice there is a 20/12 update on the blog.

Edit: while its says 20/12 update it is the 24/11 update. What a mess.

http://blog.geekbuying.com/2017/12/m...date-20171220/

[P.X]

I'm downloading the 24/11 firmware right now, comes in at snail pac estimated 2 hours, but I'm a bit worried that the actual update should be 28/11.

The firmware is definitely Android TV, as you can notice from the apps that are not available in Playstore, but don't know why they use standard launcher

Others have also commented on the date difference - This is the only IMG i have seen and is the latest release via GeekBuying blog.

Let us know what you find .... : popcorn:

[Jancales]

IMG file for V0928 (dated 1124)
http://blog.geekbuying.com/2017/12/m...date-20171220/

I only tried the Pro L version of V0928 and that uses the Leanback Launcher - I had assumed that the Pro+ release would be the same, sorry !!
Like I say I am using the Magendanz V0928 based FW now.

I'm downloading the 24/11 firmware right now, comes in at snail pac estimated 2 hours, but I'm a bit worried that the actual update should be 28/11.

The firmware is definitely Android TV, as you can notice from the apps that are not available in Playstore, but don't know why they use standard launcher

[P.X]

v0928 OEM is stock firmware right?

I installed it but there is no ATV launcher, just the usual Mecool crap launcher

Edit : and in fact i just did a factory restore and now get blank screen only.

Mecool launcher video runs, then a blank screen.

is there a stock firmware that can be flashed with burning tool?

IMG file for V0928 (dated 1124)

http://blog.geekbuying.com/2017/12/mecool-m8s-pro-plus-android-7-1-1-amlogic-s905x-firmware-update-20171220/

I only tried the Pro L version of V0928 and that uses the Leanback Launcher - I had assumed that the Pro+ release would be the same, sorry !!
Like I say I am using the Magendanz V0928 based FW now.

[Jancales]

V0928 OEM uses the ATV Leanback Launcher (aka Google TV Launcher)

Magendanz ATV is a lean version with the Terminal built in to Developer options and an App Drawer so no need for Sideload Launcher app

v0928 OEM is stock firmware right?

I installed it but there is no ATV launcher, just the usual Mecool crap launcher

Edit : and in fact i just did a factory restore and now get blank screen only.

Mecool launcher video runs, then a blank screen.

is there a stock firmware that can be flashed with burning tool?

[P.X]

V0928 OEM uses the ATV Leanback Launcher (aka Google TV Launcher)

Magendanz ATV is a lean version with the Terminal built in to Developer options and an App Drawer so no need for Sideload Launcher app

[Jancales]

Hi,
I'm still on the stock rom.
I installed the latest version of Kodi and setup the TV channels I wanted -> no use of TV center!
I also installed the launcher named "TV launcher" and it works perfectly. Note that you will still see the ugly Mecool launcher right after the boot but afterwards each time you will press the Home button on your remote you will get the new TV launcher.

Thanks I'll look into that, but isn't it possible to set the custom launcher as default in settings/home so you don't need to press home button?