MECOOL M8S Pro + TV Box Amlogic S905X Android 7.1 2/16GB Fast Lan, WiFi 802.11b/g/n

[gefattern]

Hi! Thanks for the help!
Well, i have a computer with windows.

First: My friend offer me this box because he bricked. He try install the nexus rom. Freeze screen with NEXUS logo.
Second: I unbrick the box with install a original image (see bellow in the photo) via USB Flash Tool (with usb cable)

Actual state:
Can i try install a new rom nexus? Please, help-me!
How can i install a TWRP in my mecool?
And, what file i can make a download tu put in the card? (link please) Now, i try install via sdcard mode
THANKS A LOT

Hi ,

first if the Nexus Rom is not a specific CustomRom for your Box , u can not installl it .

U can use it with StockRom or CustomRom for M8S Pro , if you can find , a working TWRP ,

can be installed with "root" like in Post #796 from maddone discribed , or with BurningTool .

Hope it helps / good luck / gefattern

[clarkss12]

Not sure if this is the correct place to post question

I just received a replacement for a bricked MeCool M8S pro + with the SEC 713 and 8/15 software release.

My new M8S pro + has the following
SEC 728 B041 KLMAGIJENB
M8S pro + user debug 7.1.1 NHG47L
2017 09 19 . 150557. V0619
Kernel Version 3.14.29
Tue sept 19 15:07:48 CST 2017
Version 7.1.1
Widevine Version 1
Security Level L1

Two questions. First is this unit suitable for the Magendanz TV Rom?

Second. This unit does not have a reset button...How do you engage reset? I had used the reset button on the first unit to use with Libreelec and worked fine, till unit quit.

Reset?? if i wish to dual boot...libreelec and go back and forth between android and LE.

Thanks Bob

Yes, you can install LibreELEC without reset switch and you can dual boot.

[steel120]

Not sure if this is the correct place to post question

I just received a replacement for a bricked MeCool M8S pro + with the SEC 713 and 8/15 software release.

My new M8S pro + has the following
SEC 728 B041 KLMAGIJENB
M8S pro + user debug 7.1.1 NHG47L
2017 09 19 . 150557. V0619
Kernel Version 3.14.29
Tue sept 19 15:07:48 CST 2017
Version 7.1.1
Widevine Version 1
Security Level L1

Two questions. First is this unit suitable for the Magendanz TV Rom?

Second. This unit does not have a reset button...How do you engage reset? I had used the reset button on the first unit to use with Libreelec and worked fine, till unit quit.

Reset?? if i wish to dual boot...libreelec and go back and forth between android and LE.

Thanks Bob

Looks like you've got one of the affected boxes that got that bad batch of Samsung eMMCs. You'll probably only get it to run that factory-installed firmware.

[Dr Alves]

Hi ,

you want to update your Box , only with Windows or Linux possible , u can try the SDCard Way , but no

guarantee that it works .

good luck / gefattern

Hi! Thanks for the help!
Well, i have a computer with windows.

First: My friend offer me this box because he bricked. He try install the nexus rom. Freeze screen with NEXUS logo.
Second: I unbrick the box with install a original image (see bellow in the photo) via USB Flash Tool (with usb cable)

Actual state:
Can i try install a new rom nexus? Please, help-me!
How can i install a TWRP in my mecool?
And, what file i can make a download tu put in the card? (link please) Now, i try install via sdcard mode
THANKS A LOT

[Jancales]

Thanks clarkss12

Any suggestion for a S912 3Gb box that doesn't run hot?

[clarkss12]

Fifty four pages is a lot to go through, so maybe someone can answer my questions.

What are Youtube and Netflix resolution for this device with stock firmware?


Does the device get too hot to handle, or is it acceptable with a bigger heat sink. In my opinion as long as it stay below 80°C is acceptable for me.


Thanks in advance.

I have actually the same questions for the M8S Pro L.

Both devices, the Mecool M8S Pro Plus and the Mecool M8S Pro L, play Netflix in 1080p with DD+, and YouTube in 4k. See my video. The Plus does NOT get excessively hot, but the L does get hot.

https://www.youtube.com/watch?v=DogDnR7HrSE&t=22s

[Jancales]

@Tieri

Thanks - Hope some expert can work out what is happening ...

I can't find the post I wanted to reply to any more, so here it goes.

I read you fitted 22x22x10 HS to the Pro+ and 28x28x10 to the Pro L.

Are those the biggest size that can be fitted or was that just the biggest on you had?

I'm holding off to order both boxes, and have no intention to do any other modification than bigger heat sink.

So i want to ask if in that case the heat issue is really disastrous on both boxes or should a bigger HS only fix the issue?

[Jancales]

Fifty four pages is a lot to go through, so maybe someone can answer my questions.

What are Youtube and Netflix resolution for this device with stock firmware?


Does the device get too hot to handle, or is it acceptable with a bigger heat sink. In my opinion as long as it stay below 80°C is acceptable for me.


Thanks in advance.

I have actually the same questions for the M8S Pro L.

[gefattern]

Thanks for response! Well I ser In The web, and my questions are:
i install the TWRP in my original image and after that, I make boot from TWRP and install a new rom?!
hmmmm
So another question, how can i burn the image in box?
I have a MacBook Pro with macOS High Sierra. I only view software only for Windows. Exists anyone for Mac? Thanks!

Hi ,

you want to update your Box , only with Windows or Linux possible , u can try the SDCard Way , but no

guarantee that it works .

good luck / gefattern

[Dr Alves]

Hi! I have on me cool box exactly equal!
Last line code in chip are different.

Well... The problem is, i update the box via usb tool and i brick. but i update the box with another fw and i unbrick.

My question:
How update the fw? via OTA or Local? I never work with this boxes.
How can update the box via OTA? I search but i cant find nothing!
Anyone can help me?

Thanks
Dr Alves

Thanks for response! Well I ser In The web, and my questions are:
i install the TWRP in my original image and after that, I make boot from TWRP and install a new rom?!
hmmmm
So another question, how can i burn the image in box?
I have a MacBook Pro with macOS High Sierra. I only view software only for Windows. Exists anyone for Mac? Thanks!

Just boot to TWRP recovery and install there. The next release will have a new update app available from Settings->About->System update. (This is already available on the M8S Pro, M8S Pro L, Beelink GT1, and Vorke Z6.)

[Dr Alves]

[Dr Alves]

Another report here: I've got a S649 chip. I only booted stock firmware the first time, didn't check which version it was. I upgraded to Magendanz's ATV rom via OTA, without any problems. My device is working like a charm since then.

Here a picture of my device:

Hi! I have on me cool box exactly equal!
Last line code in chip are different.

Well... The problem is, i update the box via usb tool and i brick. but i update the box with another fw and i unbrick.

My question:
How update the fw? via OTA or Local? I never work with this boxes.
How can update the box via OTA? I search but i cant find nothing!
Anyone can help me?

Thanks
Dr Alves

[Upo]

What kind of wifi chips does it have?
more ones or one? Which one(s)?
Thanks

SCI 9082S