Scishion V88Plus 4k won't start and RKBatchTool fail

[neodoom]

zipasi,

I have the same device as you, here's the correct firmware (rk3229_6.0_MX4V_V88_PLUS_RTL8723cs_zhongx_20170518 _V008_Spectek) https://mega.nz/#!j19WEDTA!XSCGw-El8...wBQX5-rzOPN8s4 .

I used this firmware on my test scishion v88plus 2/8gig and it fixed the lip sync in Netflix but I still don't have wifi working... Glad to see it was firmware not hardware for video issues.... Now to find another 6.0 with working wifi unless some one has a link to one or knows how to get 6051p wifi chip going on this firmware.... Also the heartbeat link is not for this module it's for the mini version... How confusing..... Don't bother with gear best for this device as it's not the right one I tried both versions before I got back to my favorite minipc site freaktab....

[Novato]

I used this firmware on my test scishion v88plus 2/8gig and it fixed the lip sync in Netflix but I still don't have wifi working... Glad to see it was firmware not hardware for video issues.... Now to find another 6.0 with working wifi unless some one has a link to one or knows how to get 6051p wifi chip going on this firmware.... Also the heartbeat link is not for this module it's for the mini version... How confusing..... Don't bother with gear best for this device as it's not the right one I tried both versions before I got back to my favorite minipc site freaktab....

My MXQ-4K has this same WiFi chip, as well as the following: MXQ-4K, MX4, V88, A95X-R1 among others, but of course you can find a Firmware for the same model with different Wi-Fi , For example use Firmware A95X-R1 Android 5.1, already a version 6.0 that I found for this device did not work, gets stuck in the Boot, after I took a look I saw that the Wi-Fi chip was different.

[anthony96]

zipasi,

I have only one more firmware you can try, after that I'm all out... https://drive.google.com/file/d/0Bz4...l0V2RBSDA/view . Its meant for the MX4M board but this firmware also happens to work on MX4V boards.

[zipasi]

hello everyone my box is working. I try many times erase flash and upgrade and flashig was successful but i used new loptop and i used rk3229_6.0_box_MX4V_RTL8723CS_RTL8703BS_SpecTek_fl ash-update_20170502. Thanks for the help ;D

[anthony96]

hello everyone my box is working. I try many times erase flash and upgrade and flashig was successful but i used new loptop and i used rk3229_6.0_box_MX4V_RTL8723CS_RTL8703BS_SpecTek_fl ash-update_20170502. Thanks for the help ;D

Nice, glad you finally got it working.

[zipasi]

I found why my box didnt work. I now connect ethernet cable to my box and my box again stoped working. And light on box is red. With wifi no problem.

[zipasi]

Now again need to upgraid

[anthony96]

I found why my box didnt work. I now connect ethernet cable to my box and my box again stoped working. And light on box is red. With wifi no problem.

Ya that sounds like a defective board, I have the same firmware as you and don't experience that problem. On a side note I have maybe ordered 10 of these so far and had one that showed green screen and rebooted evertime I would insert a SD card. Reflashing the firmware didn't help so I got a partial refund from the seller.

[Novato]

Ya that sounds like a defective board, I have the same firmware as you and don't experience that problem. On a side note I have maybe ordered 10 of these so far and had one that showed green screen and rebooted evertime I would insert a SD card. Reflashing the firmware didn't help so I got a partial refund from the seller.

Exactly