[ROM] Mecool M8S Pro TVStock Nexus ROM (Android TV 7.1)

[Novato]

Your solution is incredible! lol ... Although a bit risky. But I do not think the cable is the problem, there must be some bigger factor that we still do not know. The error still continues to occur in the SD Card Maker method, it simply freezes start. I'm uploading a video for you to see. Looking at this side everything leads me to believe that something really happened in the internal memory / ROM ... Simply the System file is interrupted in both methods.

[lyubodelev]

If charger you talk about power supply, I have 2 of two Box. Both work well. What I will not have is a USB cable Male / Male short and with good quality of traffic.

Take the knife and cut a part of your USB cable, connect the wires by colour and you are ready! What is the problem?

[Novato]

Don't you have any friend with a box to try with his charger And what about this charger, that you show a picture of it? And at the end it may reveal that your old charger is working fine, so don't through it!

If charger you talk about power supply, I have 2 of two Box. Both work well. What I will not have is a USB cable Male / Male short and with good quality of traffic.

[lyubodelev]

I'm sorry I did not understand at first, it will probably be very difficult for me to find it here in Brazil. I'll take a look at Aliex ...

Don't you have any friend with a box to try with his charger And what about this charger, that you show a picture of it? And at the end it may reveal that your old charger is working fine, so don't through it!

[Novato]

Do it with the new charger!

I do not have, all I have is the source of the device, a generic USB male - male cable. I live far from the street, but I'll try it later. Thank you, always.

[Novato]

kenable USB 2.0 A to A (Male to Male) High-Speed BLACK Cable 0.5m 50cm .this is the cable i use.

I'm sorry I did not understand at first, it will probably be very difficult for me to find it here in Brazil. I'll take a look at Aliex ...

[lyubodelev]

Yes

Do it with the new charger!

[supermal]

Yes

now i am confused.

[Novato]

But you plug in the power connector, don't you?

Yes

[lyubodelev]

he must be using usb to usb cord to power box from tv.might not output enough power?

Sure it is not enough! The TV gives max 0,5-0,7 A!

[supermal]

But you plug in the power connector, don't you?

he must be using usb to usb cord to power box from tv.might not output enough power?normally just used for usb tv sticks.

[lyubodelev]

kenable USB 2.0 A to A (Male to Male) High-Speed BLACK Cable 0.5m 50cm .this is the cable i use.

And mine is self made!

[supermal]

kenable USB 2.0 A to A (Male to Male) High-Speed BLACK Cable 0.5m 50cm .this is the cable i use.

[lyubodelev]

When I use the SD Card Burn method, just leave the box connected to normal TV, insert the card and press the reset button. At this point, instead of starting in recovery mode, it starts in bootloader mode and installs the firmware. It is similar but different than the OTA update.

But you plug in the power connector, don't you?

[Novato]

When I use the SD Card Burn method, just leave the box connected to normal TV, insert the card and press the reset button. At this point, instead of starting in recovery mode, it starts in bootloader mode and installs the firmware. It is similar but different than the OTA update.