X96 Mini TV Box Amlogic S905W + Android 7.1.2 + Quad-core Cortex-A53 + 4K VP9 H.265

[rajibprince]

Hello, I need some help regarding my x96 mini box 2GB RAM 16GB ROM bought from online store, the seller said it is real 2GB RAM and 16GB ROM. I have this Q6X v2.3 18186 version pcb board with rom and ram model as seen in the pictures. Is it true this box is only 1GB ram and 8GB rom based on chip in he photos. What compatible firmware can I install on this box without bricking it? Can I install firmware from ATVxperience? Or do you guys have any information what is the recommended custom firmware for this box? Is this box has locked uboot or bootloader?

Please collect stock firmware from the seller or original manufacturer before flashing other roms.

[rajibprince]

zzz111 I have bricked my x96 mini flashing atvxperience s905x which I bought it 7days ago. But before that I tried to flash stock 7.1 and stock 9 but failed. Then I opened it and found it has s905x instead of s905w. Now I found the way to short the pin and detected the pc but fails at 2% rom code initialzation error or usb control error. On the back of the motherboard its written: X96 _LP3_V2.0_00418. I think they used the modified uboot for this device and as I bought it from local store so there is no way to contact the original seller of this device. Please help me. I allready subscribed and comment on your video. But when I open the telegram it shows that I am not a member, please help

I have unbricked my device flashing original stock rom from seller. Somehow I managed to find out the manufacturer name from kernel screenshot(before brick). No custom rom works with that device. Whatever I flash other then stock firmware, its bricked. Is there anyway that I can modify the stock img by amlogic customization tool with atvexperienceto make it work?

[Ravenraven]

Hello, I need some help regarding my x96 mini box 2GB RAM 16GB ROM bought from online store, the seller said it is real 2GB RAM and 16GB ROM. I have this Q6X v2.3 18186 version pcb board with rom and ram model as seen in the pictures. Is it true this box is only 1GB ram and 8GB rom based on chip in he photos. What compatible firmware can I install on this box without bricking it? Can I install firmware from ATVxperience? Or do you guys have any information what is the recommended custom firmware for this box? Is this box has locked uboot or bootloader?

[rajibprince]

1. ram = KINGMAX KEP08GSC-SACDTIAM3D43 (http://bbs.16rd.com/thread-59453-1-1.html) I have doubt that it is lpddr3 or not. can u check it?
2.EMMC= kmre1000bm-b512

U can see from the pics that its manufacturing date is 20200602 and X96_LP3_V2.0. It's very latest i think

[rajibprince]

check number of ram chip and type...then youll see

1. ram = KINGMAX KEP08GSC-SACDTIAM3D43 (http://bbs.16rd.com/thread-59453-1-1.html) I have doubt that it is lpddr3 or not. can u check it?
2.EMMC= kmre1000bm-b512

[soldiaz]

check number of ram chip and type...then youll see

[rajibprince]

specs could be faked too!!! check hardware on PCB board

[soldiaz]

zzz111 Before flashing the atvxperience I saw the information on cpu-z that I have the p212 board and cpu frequency was 2 GHz (S905X) RAM was 1948 MB and I also looked at /proc/cpuinfo and /proc/meminfo. By the way, I have joined in the channel https://t.me/Chinese_electronics . Now what to do. Please help.

specs could be faked too!!! check hardware on PCB board

[rajibprince]

I have sent a password. Check your mail.

Thanks bro, but it was unsuccessful. The device specs is below:

Manufacturer HongXin
Model x96mini
Android version 7.1.2
CPU 4 cores; AArch64 Processor rev 4 (aarch64) gxl; Max: 2016,0 MHz; Min: 100,0 MHz
Display 1280 x 720; DPI: 160; Evaluated Size: 9,2"
GPU Mali-450 MP; ARM; OpenGL ES-CM 1.1; OpenGL ES 2.0
RAM 2048 MB (1948 MB available)
Flash 16 GB (11.281 GB actual);

Processor : AArch64 Processor rev 4 (aarch64)
processor : 0
processor : 1
processor : 2
processor : 3
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 wp half thumb fastmult vfp edsp neon vfpv3 tlsi vfpv4 idiva idivt
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
Hardware : Amlogic

KERNEL: Linux version 3.14.29 (ren@gxt)
Mainboard: p212
BRAND: Amlogic
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: hx_s905x
DISPLAY: hx_s905x-userdebug 7.1.2 NHG47L 20200521 test-keys
FINGERPRINT: Amlogic/hx_s905x/hx_s905x:7.1.2/NHG47L/20171025:userdebug/test-keys
HARDWARE: amlogic
ID: NHG47L
TAGS: test-keys



Whenever I try to flash roms, some soms show :
-----------ERASE BOOTLOADER------------
[01:40:33 530][HUB1-2][Inf]--start SendIdentifyCmd
[01:40:33 530][HUB1-2][Inf]--2-4-0-0
[01:40:33 531][HUB1-2][Inf]-------------Download DDR.USB-----------
[01:40:33 531][HUB1-2][Inf]--2-4-0-0
[01:40:33 531][HUB1-2][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[01:40:34 033][HUB1-2][Inf]--Control write pll reg1 0xd9000000:0x00005183
[01:40:34 535][HUB1-2][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[01:40:35 036][HUB1-2][Inf]--Control write pll reg1 0xd9000000:0x00005183
[01:40:35 536][HUB1-2][Inf]--Write initial succeed
[01:40:35 536][HUB1-2][Inf]--Upload encrypt at 0xc8100228
[01:40:35 536][HUB1-2][Inf]--ulValue = 0xadfc318c
[01:40:35 536][HUB1-2][Inf]--Read encrypt value succeed
[01:40:35 536][HUB1-2][Inf]--Download DDR.USB,size: 49152!
[01:40:35 545][HUB1-2][Inf]--Transfer complete 49152
[01:40:35 545][HUB1-2][Inf]--Run at address 0xd9000000
[01:40:35 545][HUB1-2][Inf]--RunInRam success
[01:40:35 558][HUB1-2][Inf]--2-2-0-8-0-1-0-0
[01:40:35 558][HUB1-2][Inf]--CheckFileRunState return 8
[01:40:35 558][HUB1-2][Inf]--Run at address 0xd900c000
[01:40:35 558][HUB1-2][Inf]--RunInRam succeed
[01:40:35 898][HUB1-2][Err]--ReadLargeMemCMD failed ret = -5
[01:40:35 898][HUB1-2][Err]--ReadPara failed
[01:40:35 902][HUB1-2][Err]--[0x10105002]Romcode/Initialize DDR/Read initialize status/USB Control setup error


and some roms show:

[01:39:02 455][HUB1-2][Inf]--------------ERASE BOOTLOADER------------
[01:39:02 556][HUB1-2][Inf]--start SendIdentifyCmd
[01:39:02 556][HUB1-2][Inf]--2-4-0-0
[01:39:02 556][HUB1-2][Inf]-------------Download DDR.USB-----------
[01:39:02 556][HUB1-2][Inf]--2-4-0-0
[01:39:02 556][HUB1-2][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[01:39:03 057][HUB1-2][Inf]--Control write pll reg1 0xd9000000:0x00005183
[01:39:03 559][HUB1-2][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[01:39:04 060][HUB1-2][Inf]--Control write pll reg1 0xd9000000:0x00005183
[01:39:04 560][HUB1-2][Inf]--Write initial succeed
[01:39:04 560][HUB1-2][Inf]--Upload encrypt at 0xc8100228
[01:39:04 560][HUB1-2][Inf]--ulValue = 0xadfc318c
[01:39:04 560][HUB1-2][Inf]--Read encrypt value succeed
[01:39:04 560][HUB1-2][Inf]--Download DDR.USB,size: 49152!
[01:39:04 569][HUB1-2][Inf]--Transfer complete 49152
[01:39:04 570][HUB1-2][Inf]--Run at address 0xd9000000
[01:39:04 570][HUB1-2][Inf]--RunInRam success
[01:39:04 927][HUB1-2][Inf]--IOCTL_IDENTIFY_HOST_Handler ret=-5 error_msg=libusb0-dll:err [control_msg] sending control message failed, win error: A device attached to the system is not functioning.

[01:39:04 935][HUB1-2][Err]--[0x10105004]Romcode/Initialize DDR/Read initialize status/Error result



I know you have connections with chinease developers. Please help me regarding this.



Once again thanks.

[zzz111]

@

zzz111 I am downloading the firmware, now please provide me the password for unrar. [email protected]. I have also requested in your youtube channel.

I have sent a password. Check your mail.

[rajibprince]

@

Try to go from here https://t.me/Chinese_electronics

I have told many times in my videos that there are a lot of fakes on this device. I think you bought a fake.

zzz111 I am downloading the firmware, now please provide me the password for unrar. [email protected]. I have also requested in your youtube channel.

[rajibprince]

zzz111 and tiku more pictures are attached before bricked

[rajibprince]

zzz111 the download links are not accessible via bit.ly

[rajibprince]

zzz111 Before flashing the atvxperience I saw the information on cpu-z that I have the p212 board and cpu frequency was 2 GHz (S905X) RAM was 1948 MB and I also looked at /proc/cpuinfo and /proc/meminfo. By the way, I have joined in the channel https://t.me/Chinese_electronics . Now what to do. Please help.

[zzz111]

zzz111 I have bricked my x96 mini flashing atvxperience s905x which I bought it 7days ago. But before that I tried to flash stock 7.1 and stock 9 but failed. Then I opened it and found it has s905x instead of s905w. Now I found the way to short the pin and detected the pc but fails at 2% rom code initialzation error or usb control error. On the back of the motherboard its written: X96 _LP3_V2.0_00418. I think they used the modified uboot for this device and as I bought it from local store so there is no way to contact the original seller of this device. Please help me. I allready subscribed and comment on your video. But when I open the telegram it shows that I am not a member, please help

Try to go from here https://t.me/Chinese_electronics

I have told many times in my videos that there are a lot of fakes on this device. I think you bought a fake.