H96 pro + Ultra 4k

[marponz]

But my device is same that nprev917(up in this post). He has the same device than me. And he has flasshed the H96 with good result.

[ch3mn3y]

Don't know, but if You read the latest post on Alfawise forum You will se that nprev had been lucky or it seems that some of V3.0 may be different and they will work.

I would love to be wrong. So You should try to flash it again. It may catch after few tries. Launch Burning Tool as Admin or try with sdcard flash.

[nprev917]

But my device is same that nprev917(up in this post). He has the same device than me. And he has flasshed the H96 with good result.

Yes I had the exact same issue. The only way I could get v4 to flash or even the factory rom to flash was to not let go of the reset button until it installs the rom 100% you must hold the reset button during the whole flashing process. Once it's done and booted up start the flashing process for v7a from inside the Rom but it will power down. After its off, unplug the box, hold the reset button and plug it back in. Hold the reset button until you see TWRP then you can let go and finish the flashing process. Once it's done and you press reset it will power down, just unplug and plug it back in. Now you're good to go.

[marponz]

Finally I flashed SCV4 with pc and usb burning tool and no error. But when I try flash second SCV7A from twrp and a pendrive, it dont finish installation. Second SCV7A from twrp I can not install. Can you help me? Thanks

[nprev917]

I started the installation of v7a from inside the Rom. I think the app is called update? Open up the img from that app and it should do the rest

[ch3mn3y]

What kind of error do You have in TWRP?

[marponz]

Installation has finished, but I think is bad, because there are four color circles in screen , and dont run then.

[marponz]

I think that second rom SCV7A not run well

[marponz]

I have not error in twrp, only four colour circles at end

[marponz]

SCV4 rom (installed with usb burning) run? I only have four colour circle. This rom not start never.

[ch3mn3y]

Are they moving? If yes, than boot back to TWRP, choose Wipe and then swipe. When it ends, reboot to system,

[marponz]

They are moving, but then there are anything

[maxim33]

They are moving, but then there are anything

AT first boot ,it takes a little more time to start , so please allow atleast 15 to 30 minuts and the box will boot automaticaly ,when circles are rotating, it is the sign that rewrite and reboot process is continue . so give it a try ...

[marponz]

One doubm, after first rom SCV4, I must wait for boot or I can update SCV7A quickly and no wait to boot?

[ch3mn3y]

I booted it and setup using the Setup Wizard. The moment the launcher was shown I booted to TWRP and flashed the update.