NEW MK808/MK808B MiniX NEO X5 BASED ROMS (30 AUG 2013)

[rouletabille]

If you want to use CWM to flash, you have to change the kernel in the zip file of this rom.

I did it for my mk808, i just paste the kernel image from the first rom to download and flash by rkbatchtool there, to the zip file MK808B_digitopMod_v2.1_WALKMAN (30.08.2013) to flash by CWM.

Im using this kernel i dont know what version is that, like i said no more temp issue, real good wifi signal (under lewy lewy 224 i had to use 2dark kernel for a good wifi).

Afterwards you can use other kernel with rkbatchtool like said mo123.

btw im using TV provider stream application by wifi and this rom gives me the better result, no lagg, no buggs, no force close.

like it said there, this rom maybe isnt a real improvment; but brings surely some positive result to some issues and a stable video use.

Our rk3066 continues to give us good moment and will delay on my own to choose rk3188

[phinc]

Are these two roms based on the same stock rom?

[iriemon]

Hmmm....

mo123 and rouletabille: Thanks very much for your prompt help!
Heres where I am now: I flashed the kernel only, but it won't boot.
Now my PC does not recognize the stick at all, even after re-boots. Try as I might, I can't get into the device to load USB drivers and flash again.

Any thoughts? I tried different cables, no luck. I wonder if the TV stick is lost?

Thanks again - you really went above and beyond in trying to help this newb!

[mo123]

You can try this.
1. You can uninstall the Rockchip drivers in device manager
2. Reconnect device to pc to a different usb port and make sure the latest drivers are installed ver 3.0.0 or something like that not the v2 drivers since the old drivers can give problems with new firmware.
3. In device manager make sure your usb port devices aren't set to turn off power when not in use, since the rockchip device's power can get turned off by windows even while flashing.
4. You can try to flash a stock rom for your device first by booting to recovery, don't know if there is a pin/button you can push on your device since I'm not familiar with that device.
5. Also make sure you use a kernel(Android 4.1.1 not 4.2) from MK802 IIIS or a device with your Mediatek wifi on your device since the Mk808 & Mk808B kernels will result in your wifi not working, since you have sort of like a 'clone' device with not a lot of support. The kernel must be between 7-9mb I think, anything bigger and your device might not boot, happened to me.
6. It could also be that devices with Mediatek wifi have other files in the firmware or boot to work correctly and that this rom is incompatible with your device(Not likely).

Keep on trying, as I have bricked my device a couple of times but got it working again, there is hope.

[iriemon]

mo123: Thanks again. You really are helpful!

I went at it again today, and my suspicions regarding the quality of the hardware have been confirmed. The mini USB connector (OTG) fell into the case! I took it apart, and the other connector (power) also fell off the board.

Now I simply need to decide if it's worth re-attaching them....

[tocaazul]

Link dead....



mo123, I am not able to access the link http://sendfile.su/857811 (Includes MK808 720p kernel), please if you can reup..... Hugs from Brazil.

[tocaazul]

mo123: Thanks again. You really are helpful!

I went at it again today, and my suspicions regarding the quality of the hardware have been confirmed. The mini USB connector (OTG) fell into the case! I took it apart, and the other connector (power) also fell off the board.

Now I simply need to decide if it's worth re-attaching them....

sorry, my application Malwarebytes was blocking the download site.
Thank you.

[tocaazul]

Congratulations mo123 for the work, I've done some tests and so far everything is running fine. I really liked the boot animation and desktop. I used the kernel 2dark4u 1.4 Ghz and the system is fast and no crashes. Watch all my video files in MKV HD and FULL HD smoothly. Wi Fi signal is very strong and if you can watch streaming videos normally. The MX player does not play DTS audio, it was necessary to install a codec apart. The native system reboot is very slowly. Installed a reboot apk Google Play and was show. Use the Set CPU apk and always leave set to @1.2 Ghz, in Hotplug governor. For now it's just, I will continue to test your Rom and if you have more news I post. Congratulations again primarily "RAISE" MK808 the already quite forgotten by the users. Even more!!

[tocaazul]

mo123 good morning.

Please, how do I remove some apps of Rom (Skype and Youtube). Await help. Thank you !!!

[mo123]

mo123 good morning.

Please, how do I remove some apps of Rom (Skype and Youtube). Await help. Thank you !!!

1. You can use http://www.makeuseof.com/tag/the-cle...u-dont-use-si/ or
2. Use Root Explorer in Es File Manager, Mount devices RW instead of just readable, then go to system/apps(something like that) and delete the apps, make sure 'show hidden files' is also enabled in ESF settings. Remember to change folder permissions back to read-only.

[BoJo]

Where do I download?

Can't seem to get this link to work for me... Is there another way? I've got an MK808...

[mo123]

Can't seem to get this link to work for me... Is there another way? I've got an MK808...

If your talking about the first rom it's http://sendfile.su/857811
Click on the first blue button and then the link underneath it.
The second rom - http://depositfiles.com/files/cmr04x414 Click on regular download and enter the captcha, use your browser's download manager not a 3rd party one.

I would recommend you to download the second rom as it's newer and just replace the kernel.

The Mk808 might have trouble downloading from file hosting websites if you don't use the correct browsers.
It downloads perfect from a Windows PC.

[tocaazul]

1. You can use http://www.makeuseof.com/tag/the-cle...u-dont-use-si/ or
2. Use Root Explorer in Es File Manager, Mount devices RW instead of just readable, then go to system/apps(something like that) and delete the apps, make sure 'show hidden files' is also enabled in ESF settings. Remember to change folder permissions back to read-only.

Ok mo123, thanks. Hugs !!!

[rouletabille]

hey all,

i would like to replace my sdcard by an usb disk; i tried finless method, but even ith my change i just loose my sdcard with only 00kb space and my usb disk isnt the dafault sdcard?

dev_mount udisk0 /mnt/usb_storage/USB_DISK0 auto /devices/platform/usb
dev_mount flash /mnt/sdcard auto /devices/platform/usb
dev_mount sdcard /mnt/external_sd auto /devices/platform/rk29_sdmmc.0/mmc_host/mmc0
dev_mount udisk0 /mnt/usb_storage/USB_DISK0 1 /devices/platform/usb
dev_mount udisk1 /mnt/usb_storage/USB_DISK1 1 /devices/platform/usb
dev_mount udisk2 /mnt/usb_storage/USB_DISK2 1 /devices/platform/usb
dev_mount udisk3 /mnt/usb_storage/USB_DISK3 1 /devices/platform/usb
dev_mount udisk4 /mnt/usb_storage/USB_DISK4 1 /devices/platform/usb
dev_mount udisk5 /mnt/usb_storage/USB_DISK5 1 /devices/platform/usb

any ideas ?

btw, unable to launch google drive

[BrujoOtaku]

Thanks for the ROM , works great , highly recommended. installed on a MK808B , and install countless apps and they all work perfectly , thanks again and greetings .