X99 TV BOX - RK3399 Mali - T860MP4 4/32GB ROM A7.1 HDR10 Dual WiFi BT4.1

[majdi qurony]

Hi ,

please use a copper wire for shorting , this looks for me little strange ,

and you really know which one is the "reset" Button ??? , think well , now

only can hope you will get it , did you load the SD Tools ??? ,

good luck / gefattern

I tried cooper same thing.

[majdi qurony]

short the "three pinout" to enter maskrom mode

Hi

I tried it nothing came up but the small light the red one it get switch off while im connecting the 3 points together

[gefattern]

Hi beppin ,

so you say all 3 Points must shorted , really strange never seen or heard , but if it really

works we must inform User "madji" that he can restore his Box this Way , really good to

know , for Future ,

greetings / gefattern

[gefattern]

This is for X99 TV Box Firmware (20181024) Plugin the big USB plug into your computer the small 3.0 USB cable first into the box. Then hold the reset button and plug USB(big) to USB (big) into 2.0 USB on your computer and other end into the box (X99) while holding reset button. You will hear a sound knowing your box is connected. Then startup the RK android tool v2.43, load the firmware and hit upgrade. This is for 20181024 and its rooted and it works great when I hook it to my TV.

---

Hi ,

so you mean , they changed the Port for flashing ??? strange , but if it really works we must inform "madji" ,

thanks for Info , good to know , greetings / gefattern

[raruba]

Remember you need 2 WIRES not 1. Don't need a power supply just the 2 USB wires.

[raruba]

This is for X99 TV Box Firmware (20181024) Plugin the big USB plug into your computer the small 3.0 USB cable first into the box. Then hold the reset button and plug USB(big) to USB (big) into 2.0 USB on your computer and other end into the box (X99) while holding reset button. You will hear a sound knowing your box is connected. Then startup the RK android tool v2.43, load the firmware and hit upgrade. This is for 20181024 and its rooted and it works great when I hook it to my TV.

---

[beppin]

short the "three pinout" to enter maskrom mode

[gefattern]

Hi ,

please use a copper wire for shorting , this looks for me little strange ,

and you really know which one is the "reset" Button ??? , think well , now

only can hope you will get it , did you load the SD Tools ??? ,

good luck / gefattern

[majdi qurony]

[gefattern]

Unfortunate,, I tried but nothing worked


Thank you very much.

Hi ,

please upload the Picture again , i was not able to see it , not working ,

second , please try to connect your Box into "LoaderMode" to see if it

works ,

1. load FW to Tool

2. press the "reset" Button , small Hole , hold it ,

3. connect USB

4. connect Power

try it this Way ,

and please download the latest Drivers and Flash & SDTools from the

Link i gave , i always had same Problems with SD restore for my UT3 ,

but i found out that in this Tools (Link) one of them has special SDboot

Loaders inside the Folders , maybe this was always missing , first Time

that i saw this ,

https://forum.freaktab.com/forum/tv-player-support/rk3288-devices/nagrace-3288-devices/755354-hph-nt-v6-rk3288-custom-nougat-rom/page2

please report if your Box was able to get in "LoaderMode" , hope you will

get it , good luck / gefattern

Hint : Pages before User "bergamesk" discribed how to use the SD Way

[majdi qurony]

Unfortunate,, I tried but nothing worked


Thank you very much.

[gefattern]

Hi
Sorry I have early shift today
Tonight I?m going to try
Any video or tutorial may it help??

Hi ,

not really , but you can look on YT for it , good luck / gefattern

[majdi qurony]

Hi ,

any results ,

gefattern

Hi
Sorry I have early shift today
Tonight I?m going to try
Any video or tutorial may it help??

[gefattern]

Hi ,

any results ,

gefattern

[gefattern]

[QUOTE=majdi qurony;n760438]i tried both
and what about LoderMode?? ,

please upload the Pictue again , maybe on a Picture Uploadsite ,

and Link here ,

thanks / gefattern