[08/03/2019] AMlogic Tools [6.0.0][A new milestone][Donate Version Available]

[sagert]

It is written about her here:

- Added third level of unpacking / packaging (boot, recovery, logo, devicetree) - Added the ability to create full ota zip (fota) from level1 (Java is required).- Added third level of unpacking / packaging (boot, recovery, logo, devicetree) - Added the ability to create full ota zip (fota) from level1 (Java is required).

Instructions:
#
First level
Kitchenette to work with the first level of Amlogic firmware
-------------------------------------------------- -----

Instructions:

1) to unpack the firmware, take the UBT Image (.img) file and put it in the in folder.
If the name is confusing, rename it to something simple for example ax95.img

2) click _unpack_level1.bat

3) in the level1 folder, replace / edit the files:

aml_sdc_burn.UBOOT- bootloader, file 1
DDR.USB - bootloader, file 2.change simultaneously with f.1

boot.PARTITION - kernel

_aml_dtb.PARTITION - kernel settings file

recovery.PARTITION - recovery

logo.PARTITION - logo (sometimes depends on the bootloader).

odm.PARTITION -
product.PARTITION -
system.PARTITION -
vendor.PARTITION - These 4 sections contain the system files.

4) click _pack_level1.bat, in the out folder we take the finished img file.
to create a full OTA, click _pack_level1_fota.bat

5) Enjoy.
#
Second level
Kitchenette for working with the second level of firmware Amlogic
-------------------------------------------------- ------

Instructions:

1) to work with the second level, you must unpack level 1 (see level1.txt)

2) click _unpack_level2.bat

3) in the level2 folder, replace / edit the files in the folders:

system - the system section
vendor - the vendor section
product - product section
odm - odm section

If you add new files or folders that require special rights
(by default, new files and folders are assigned privileges 0644 and 0755 during packing)
then register these rights in the * _fs_config files.
* _File_contexts files are needed to register SELinux privileges
And * _size files set the size of this or that partition.

4) click _pack_level2.bat
to create a full OTA, click _pack_level1_fota.bat

5) then pack level 1 (click _pack_level1.bat, see level1.txt)

6) Enjoy.
#
Third level
Kitchenette to work with the third level of firmware Amlogic
-------------------------------------------------- ------

Instructions:

1) to work with the third level, you must unpack level 1 (see level1.txt)

2) click _unpack_level3.bat

3) in the level3 folder, replace / edit the files in the folders:

boot - boot partition (kernel)
recovery - recovery section
logo - logo section
devtree - devicetree section

4) click _pack_level3.bat

5) then pack level 1 (click _pack_level1.bat, see level1.txt)
to create a full OTA, click _pack_level1_fota.bat

6) Enjoy.

[sagert]

Update XVortex kitchen v3

vtx_kitchen_v3 (mediafire.com)

[sagert]

It's harder but it works for me.Although all the subtleties take a long time to explain.

[sagert]

I use only 1 level in this kitchen. To edit system, vendor,boot,recovery I use this program:

https://forum.xda-developers.com/t/unpacker-kitchen-for-android-uka.4087797/

[raruba]

Perhaps, when opening the 2nd level of the firmware, Windows detected some kind of harmful program in the firmware. I had UTorrent, for example. I had to click and open clean_up to clear the folder and repeat the steps again to open the firmware.

Have tried everything sagert, level2 will not work

[sagert]

I tried exactly as it shows, level1 unpacked fine, level2 just flashes a black screen and puts a level2 folder in the kitchen folder......?????

Perhaps, when opening the 2nd level of the firmware, Windows detected some kind of harmful program in the firmware. I had UTorrent, for example. I had to click and open clean_up to clear the folder and repeat the steps again to open the firmware.

[sagert]

I tried exactly as it shows, level1 unpacked fine, level2 just flashes a black screen and puts a level2 folder in the kitchen folder......?????

I made a video with Camstudio.This program is easy to install on windows.I don't know what to say.Make your on video.

https://camstudio.org

Or maybe another program.

[raruba]

Another link to a video of the work of the XVortex kitchen.

https://anonfiles.com/f9qdG070pd/XVo...tchen_work_zip

I tried exactly as it shows, level1 unpacked fine, level2 just flashes a black screen and puts a level2 folder in the kitchen folder......?????

[sagert]

Another link to a video of the work of the XVortex kitchen.

https://anonfiles.com/f9qdG070pd/XVortex_kitchen_work_zip

[sagert]

Its surely not working like that for me....thats for sure. Only thing it does for me is make a folder called level1 and if u click unpack level 2, a folder called level 2, nothing in either folder

Video of how the XVortex kitchen works.

https://files.dp.ua/ru/yX7U

[antonio6o6]

Finally got this tool 7.1.0 to work on Firmware Android 9 move some file and delete some file didn't get me no error I'm packing the firmware the only problem if that I don't have to box right now to test it I copy this XanderUI.dll. and paste it inside the folder AMlogic tool 7.1.0.

[raruba]

The instructions are the same.Especially since I write english with translation.Take your firmware and rename it to x.img.Put it in the in folder.Press unpack.level1 and open it 1 level will be unpacked in the terminal.Press unpack.level2 and open it the 2nd level will be unpacked in the terminal.Next edit level2.There you edit system, vendor and more...Now collect level 2.Click repack.level2 and open it.Next collect 1 level.Click repack.level1 and open it ..You will find the finished firmware in the out folder.

Its surely not working like that for me....thats for sure. Only thing it does for me is make a folder called level1 and if u click unpack level 2, a folder called level 2, nothing in either folder

[sagert]

I do not know on what windows the kitchen works and on what does not work.I have 64 bit win 10 pro.

[sagert]

Can you elaborate more please? What settings you did and how you started from the beginning? I tried many android tools, none worked completely. I have windows 7 32bit
thanks in advance

The instructions are the same.Especially since I write english with translation.Take your firmware and rename it to x.img.Put it in the in folder.Press unpack.level1 and open it 1 level will be unpacked in the terminal.Press unpack.level2 and open it the 2nd level will be unpacked in the terminal.Next edit level2.There you edit system, vendor and more...Now collect level 2.Click repack.level2 and open it.Next collect 1 level.Click repack.level1 and open it ..You will find the finished firmware in the out folder.

[plikmuny]

There unpack.level1 it is necessary to press and open that it worked.

Can you elaborate more please? What settings you did and how you started from the beginning? I tried many android tools, none worked completely. I have windows 7 32bit
thanks in advance