HPH NT-V6 RK3288 Custom Nougat ROM

[el_easy]

You can use power of Magisk.
Just install magisk manager apk https://magiskmanager.com/downloading-magisk-manager
and flash my patched boot.img to boot partition https://mega.nz/#!Ack2GYDL!-Ip4_024d...Kzv6ovsX5o251M

Tell me how you flash this patched boot.img using Flash Tool AndroidTool v2.59 ? Thanks

[gefattern]

Tell me how you flash this patched boot.img using Flash Tool AndroidTool v2.59 ? Thanks

Hi ,

yes flash it with AT2.59 , first Tab , only the "boot.img" , uncheck all others ,

then change on end of "boot" line to the patched "boot.img" stored on your Pc ,

good luck / gefattern

[bloodgnome]

Could someone with linux make a "Bootable from SD" Version of this latest firmware with the patched boot.img ?

[missincat]

great news for a relatively old device! thanks MO for your great job done! i am wondering if there is any chance of using android 8 or an android tvluncher like shield tv，that will be really great for us . thanks again

[mo123]

You can try this launcher

https://play.google.com/store/apps/details?id=ca.dstudio.atvlauncher.free

or RKTVLauncher

https://github.com/rock64-android/vendor-rockchip-common/raw/master/apps/RKTvLauncher/RKTvLauncher.apk

[missincat]

hi MO! thanks for your quick reply

[bryanhk]

Hi Mo123
I try it(Nougat ROM) on my Cr12, and find out that it is not compatible
Flash successful but easy to crash--
Is there a remedy?

[mo123]

No, unless the manufacturer of your device also releases a Nougat firmware. Nougat uses a 4.4 kernel compared to a 3.10 one used in Lollipop which is completely different, so no one knows the correct changes to make it work correctly on a CR12 device.

[kpcz]

You can use power of Magisk.
Just install magisk manager apk https://magiskmanager.com/downloading-magisk-manager
and flash my patched boot.img to boot partition https://mega.nz/#!Ack2GYDL!-Ip4_024d...Kzv6ovsX5o251M

First thank you mo123 to give back life to my old RK3288 device. But I am unable to root. flashed boot.img, installed Magisk manager. But it says that Magisk is not installed :/ Flashed the boot.img via RKDevTool 2.59.

Device Beelink R89

Thanks

[Dumonde]

First thank you mo123 to give back life to my old RK3288 device. But I am unable to root. flashed boot.img, installed Magisk manager. But it says that Magisk is not installed :/ Flashed the boot.img via RKDevTool 2.59.

Device Beelink R89

Thanks

I have Beelink R89 too. Press "Install" in magisk manager.

[el_easy]

Guys, any body know what is the cause this error ''Match device type failed, stop running'' ? I am running stock Ugoos UT3S RK3288 NOUGAT BETA v4.0 that by the way is runnning fine, but i want something fresh and Im tryinh to install HPH NT-V6 RK3288 Custom Nougat ROM,but everytimes i press upgrade that error comes out..
Note:
I used differents AndroidTool versions, tried window 7 and 10..
Driver is properly installed since i used to flash Rom since Wasser Rom and nothing

[gefattern]

Guys, any body know what is the cause this error ''Match device type failed, stop running'' ? I am running stock Ugoos UT3S RK3288 NOUGAT BETA v4.0 that by the way is runnning fine, but i want something fresh and Im tryinh to install HPH NT-V6 RK3288 Custom Nougat ROM,but everytimes i press upgrade that error comes out..
Note:
I used differents AndroidTool versions, tried window 7 and 10..
Driver is properly installed since i used to flash Rom since Wasser Rom and nothing

Hi ,

look on your Flashtool , it is in ADB Mode , you need LoaderMode or MaskRomMode to flash ,

Device must be off , good luck / gefattern

[mo123]

Guys, any body know what is the cause this error ''Match device type failed, stop running'' ? I am running stock Ugoos UT3S RK3288 NOUGAT BETA v4.0 that by the way is runnning fine, but i want something fresh and Im tryinh to install HPH NT-V6 RK3288 Custom Nougat ROM,but everytimes i press upgrade that error comes out..
Note:
I used differents AndroidTool versions, tried window 7 and 10..
Driver is properly installed since i used to flash Rom since Wasser Rom and nothing

You must Enter Loader mode, insert a toothpick into the recovery hole then connect the USB cable to the OTG port and connect power.
You must also do an 'EraseFlash' then 'Upgrade', flash the update.img, not a boot.img
You could also try FactoryTool v1.60 if AndroidTool v2.59 doesn't work.

[gefattern]

You must Enter Loader mode, insert a toothpick into the recovery hole then connect the USB cable to the OTG port and connect power.
You must also do an 'EraseFlash' then 'Upgrade', flash the update.img, not a boot.img
You could also try FactoryTool v1.60 if AndroidTool v2.59 doesn't work.

HI Mo123 ,


really a new Factorytool Version , can you upload it , looks like the newest ???

and how they are all got into ADB Mode , maybe a solution to flash my bricked

UT3 ??? , if available ,

greetings / gefattern

[Dumonde]

really a new Factorytool Version , can you upload it , looks like the newest ???

All rockchip tools here https://github.com/rockchip-linux/to...master/windows

[gefattern]

All rockchip tools here https://github.com/rockchip-linux/to...master/windows

Hi ,

first i want to say thanks for the Link , but so called FactoryTool 1.63 , from there ,

is in real the Version 1.50 , to see in Log , but for the rest some interesting Tools ,

maybe i can unbrick my UT3 with them , hopefully ,

greetings / gefattern

[doc539]

Thank you"Mo123" for a great rom!!! you are the best!!!