NEOMODE HYBRID ROM 1.7 - MK802IV, UG007B, CX-919, MK809III and others with AP6210

[codger64]

Hi all this rom installed fine on my cx919 first time no problem at all

Hi all this rom installed fine on my cx919 first time no problem at all its running very fast im liking it so far all is working well apart from I can't seem to get sixaxis touch emulation to work my main use for the cx919 is games any idea how I can fix this thanks neomode for a great rom even the shutdown butten WORKS on the task bar

Hello - is your CX-919 the rk3188T chip model (mine says ver. 2.0 on the board)? I cannot get this ROM to work on mine? Did you change the kernel to the J22 kernel? I tried the: kernel_t_AP6210-J22_HD_v300.img and it won't boot into Android? Can you please let me know what you used exactly (flash tool, kernel, parameter, etc.) to get yours to work? Thanks.

[blinkone]

Hello - is your CX-919 the rk3188T chip model (mine says ver. 2.0 on the board)? I cannot get this ROM to work on mine? Did you change the kernel to the J22 kernel? I tried the: kernel_t_AP6210-J22_HD_v300.img and it won't boot into Android? Can you please let me know what you used exactly (flash tool, kernel, parameter, etc.) to get yours to work? Thanks.

If yours says v2.0 on the bored you are very lucky you have NOT got the t model the standered kernel should work or you can try this rom below it worked perfect on mine v2.0 bored


in the rom below the instructions are noob frendly

http://www.freaktab.com/showthread.php?7553-UPDATED-CX919-4-2-2-Finless-ROM-1-6b

[codger64]

If yours says v2.0 on the bored you are very lucky you have NOT got the t model the standered kernel should work or you can try this rom below it worked perfect on mine v2.0 bored


in the rom below the instructions are noob frendly
http://www.freaktab.com/showthread.p...nless-ROM-1-6b

Thanks for your reply. My board does say Ver. 2.0 but the listing page from geekbuying.com that I bought it from and on my invoice both say it is the rk3188T model??
I have tried the Finless Ver. 1.6 and it would show the Finless icon and start to boot but would never completly boot into Android?

[Dimik68]

GPS

Hello, Neomod. You can add the ROM 1.7 modules with GPS.
MK 802IV use in a vehicle with Pioneer AVH 8600 bt. Really miss the module using an external GPS receiver.

[zdns]

hello can someone help me?
i have mini pc stick,the rom that install is: "RK3188_R-BOX_ANDROID4.2.2-SDK_V1.00_130514"
i want to upgrade so this rom is good for me?and if yes can someone plz tell me how i can do it

[blinkone]

hello can someone help me?
i have mini pc stick,the rom that install is: "RK3188_R-BOX_ANDROID4.2.2-SDK_V1.00_130514"
i want to upgrade so this rom is good for me?and if yes can someone plz tell me how i can do it

Hi we need more info about your device, A photo would be good & a photo of the PCB bored would be even better

[zdns]

this is my device

[blinkone]

this is my device

That looks like a cx 919ii take a look here http://freaktab.com/forum/tv-player-...t-r42-cx919-ii

[zdns]

how can i know if it cx919 or cx919 II ?
there is a differnet ?

[blinkone]

how can i know if it cx919 or cx919 II ?
there is a differnet ?

A cx-919 only has one antenna...The roms are not the same either

[zdns]

can someone help me and give me rom that work good with my minipc that know it good because i see there is lots of rom
thks for the help

[Den86]

Hello! Prompt what Neomod go with my MK 809 III? Thank you!