rk3229 chip box

[charan]

Hi ,

for sure you can load them somewhere online , search for :

rockchip loader file download , on big Brother G , the first link

is a GitHub Link with all RKLoaders , but i looked no RK3229 Loaders ,

shit happens ,

good luck / gefattern

i tried some loaders , some of them flashes successfully , but the box dosent turn on after completing flash

[gefattern]

i tried some loaders , some of them flashes successfully , but the box dosent turn on after completing flash

Hi ,

did you not read that they not fit your Box , i extra edit the Text for this , few minutes later i saw it , stop flashing wrong loader , what loader Version is used on this bricked RK3229 PCB ???
without you must not start ,

greetings / gefattern

[charan]

Hi ,

did you not read that they not fit your Box , i extra edit the Text for this , few minutes later i saw it , stop flashing wrong loader , what loader Version is used on this bricked RK3229 PCB ???
without you must not start ,

greetings / gefattern

by usinng this loader i get "prepare idb failed"

[gefattern]

by usinng this loader i get "prepare idb failed"

Hi ,

please listen , to restore you must use the Haizenberg Way , like he explained , not like you did flashing all parts , only loader and it must be the correct RK3229 loader , that before the Box bricked was installed ,
which Loader Version was it ???

good luck / gefattern

[charan]

Hi ,

did you not read that they not fit your Box , i extra edit the Text for this , few minutes later i saw it , stop flashing wrong loader , what loader Version is used on this bricked RK3229 PCB ???
without you must not start ,

greetings / gefattern

i used that method of shorting GND and CLK but the result is same.

i dont know which was previous loader file.

now im using loader file of MXQ box,

[charan]

Hi ,

please listen , to restore you must use the Haizenberg Way , like he explained , not like you did flashing all parts , only loader and it must be the correct RK3229 loader , that before the Box bricked was installed ,
which Loader Version was it ???

good luck / gefattern

i used that method of shorting GND and CLK but the result is same.

i dont know which was previous loader file.

now im using loader file of MXQ box,

https://drive.google.com/file/d/1NA5...ew?usp=sharing

[gefattern]

i used that method of shorting GND and CLK but the result is same.

i dont know which was previous loader file.

now im using loader file of MXQ box,

https://drive.google.com/file/d/1NA5...ew?usp=sharing

Hi ,

listen , dont know what you are doing , think , the idbloader part is bricked & cant restored ,

as more you flash different parts , as more bricks , maybe you can restore some of your bricked

Boxes with the SDCard Way , later i can upload , again , the SDTools & you can try this , further i cant

help , because i am only Moderator , not Developer , i try to guide the Users the right Way , if i can ,

further good luck / gefattern

[gefattern]

Hi ,

here the SDTools :

https://www.file-upload.net/download-14166834/Tools.zip.html

good luck / gefattern

[charan]

Hi ,
here the SDTools :
https://www.file-upload.net/download...Tools.zip.html
good luck / gefattern

Box enters recovery mode, after using sd card

only android logo comes up and then goes into recovery mode

[gefattern]

Box enters recovery mode, after using sd card

only android logo comes up and then goes into recovery mode

Hi ,

one is for booting from SD , the one with only SDboot.bin , the other Tool is for flashing with SD , the one with 3 Loaders inside Folder , some say you must press Reset , for 3-4 seconds while plugging in Power , then leave , but i think this is not needed , my Hint for you , dont buy unsupported cheap
MXQ or other shit , buy better supported Devices like , UGOOS , Beelink or similar ,

greetings / gefattern