TANIX TX6S Allwinner H616 Android 10.0 TV Box 2GB/16GB 2.4G+5.8G WiFi LAN Bluetooth

[banditjackpotty]

Any Changelog on this new update?

Or did you notice any significant changes with this new update?

Don't know if you noticed, but there is a new update via the local update app for April, maybe you should try it out since you seem like the most knowledgable here.

BTW I have the Ninkbox N6 Plus and I believe it is an exact rebrand of the Tanix TX6s. Same information is in aida64 and same issues as described as everyone else. Thought I would let everyone know if this thread pops up, and I will be trying to flash the TX6S firmware updates to see if they work/improve my device

[Cob]

Received update via Local Update this morning

[belloto]

Is there a new version? Is it possibble to install other OS in this box?

[Turkmenator]

Somebody try Local Update - dynamic system update.Some people can update to 20200331 FW
I have 20200323 and system can't update

[belloto]

Nothing.

[RiCkLaR_atvX]

TX6S OTA update 23.03

Any Changelog on this new update?

Or did you notice any significant changes with this new update?

[belloto]

it is the same shit (sorry), but in a higher version.
nothing works, and it's impossible to install apps.

Waiting for a new version.

[kokovi4]

Yes, from yesterday, So, little good , continue test .

[dartyard]

TX6S OTA update 23.03

Latest?? How about temp??

[kokovi4]

TX6S OTA update 23.03

[dartyard]

hello this box is good or not? or bad firmware?

does anywant mod for atv?

[bushrang3r]

Has anyone had an issue with this box where it won't power up if the reset button is being held down?

[c,lei]

Your comment is confusing, hard to understand your point of interest. Are you just saying how bad firmwares are? Or, Are you still having problems installing firmware, or connecting device to computer?

You know the Reset Button is hidden next to SDcard slot on side of device! (Reset button is not at rear of device, this will cause problems if you didn't know this). Best thing to do is dissemble TVbox and cut out the plastic fin that blocks the reset button so you can easily access the button when you put the case back together.

I always use Phoenix_USB_Tool on windows computer to Flash the different Allwinner Firmwares,
1) load firmware in Tool
2) click START
3) hold Reset button down
4) connect USB cable while you keep holding Reset down
5) Windows system makes confirmation sound that device is connected when connected, but the Tool doesn't start Burning firmware immediately, it takes some time, maybe 1 minutes for Tool to start showing progress.
6) plug and connect TVbox to TV and wait 5 minutes for new firmware to finish first-boot start-up processes.

Actually, the best thing to do is take an old credit or similar card and cut a strip of plastic off it using scissors so that it will slide inside/into the vent slot in front of the reset button so you can press the button as you would using a paper clip or toothpick.

No need to damage or dissemble anything.

This is what I came up with to acess the reset button on my MXQ Pro 4K and TX6 Type devices:

[c,lei]

Your comment is confusing, hard to understand your point of interest. Are you just saying how bad firmwares are? Or, Are you still having problems installing firmware, or connecting device to computer?

You know the Reset Button is hidden next to SDcard slot on side of device! (Reset button is not at rear of device, this will cause problems if you didn't know this). Best thing to do is dissemble TVbox and cut out the plastic fin that blocks the reset button so you can easily access the button when you put the case back together.

I always use Phoenix_USB_Tool on windows computer to Flash the different Allwinner Firmwares,
1) load firmware in Tool
2) click START
3) hold Reset button down
4) connect USB cable while you keep holding Reset down
5) Windows system makes confirmation sound that device is connected when connected, but the Tool doesn't start Burning firmware immediately, it takes some time, maybe 1 minutes for Tool to start showing progress.
6) plug and connect TVbox to TV and wait 5 minutes for new firmware to finish first-boot start-up processes.

Actually, the best thing to do is take an old credit or similar card and cut a strip of plastic off it using scissors so that it will slide inside/into the vent slot in front of the reset button so you can press the button as you would using a paper clip or toothpick.

No need to damage or dissemble anything.

[c,lei]

Hi ,

Nice to see , Risky Dude , hope both calm down , had 2 Flags because of it ,

Flagger did the right , good hope for the Future that they do it right now , we

all have Errors , nobody is pefect , but to know and change it is the best thing ,

i know it is frustrating to see , that there is no Support for the Box that bought ,

next Time they buy a Shield , or Ugoos or similar better supported China Boxes ,

greetings / gefattern

Check out youtube, see the comments about Nivida Shield from people who bought one before shelling out around $200 for one.

Not worth it, especially if you're not a PC gamer/Nivida fanboi.