TANIX TX6S Allwinner H616 Android 10.0 TV Box 2GB/16GB 2.4G+5.8G WiFi LAN Bluetooth

[tombraga]

Could you feel a light klick when you pressed the tooth Pick? It's a little tricky to hold this down enough time after connect the power.

I use always a paperclip, more stable as wooden tooth Pick. But must use carefully and soft pressing.

[gksureshkumar]

Dear friend Thank you for the inputs. I will try today and update about the outcome.

Dear friend i transferred the update zip file to a empty USB stick.
Then i inserted the USB stick to the lower USB 2 port
I pressed the tooth pick in the reset button and inserted the power cord to go to recovery mode
I could not able to open the recovery mode even i waited long press with tooth pick and power plug insertion. i saw only TX6S logo
in the TV screen. I tried serveral times tooth prick press with USB stick inside and then power plug insertion then
recovery mode is not starting at all. If it goes to recovery mode then i can apply update from USB stick but
i could not able to reach that stage. Please help

[gksureshkumar]

1. You need to copy the update.zip on a USB-Stick because the sdcard is not recognized as such (but the stick). Root of the stick is nothing special. Just copy the file on an empty stick
2. Reboot into recovery as mentioned before. With the toothpick trick, while the USB Stick is in the lower USB 2 Port !!!
3. Go on "Apply update from SD-Card"
4. Take the first entry (for me it was the needed USB Stick)
5. You will see the update.zip
6. Choose this file and let it install
7. You will have to wait some minutes. The box reboots and will reboot into system (about 7-8 minutes or so)
8. i forgot

Happy flashing..

Dear friend Thank you for the inputs. I will try today and update about the outcome.

[Javimetal]

Hi Javimetal so ...S/N: CSH616P63C0074-H

Thanks, it's a good help for engineers



--------



Working also in replacing ATV Play store (provided by AllWinner) to the usual one.

[TheRealDeal]

Thank you for your tip Mr.MartaN. Can you please explain how to copy the zip file to SD card root directory. How to go Root directory of SD card

1. You need to copy the update.zip on a USB-Stick because the sdcard is not recognized as such (but the stick). Root of the stick is nothing special. Just copy the file on an empty stick
2. Reboot into recovery as mentioned before. With the toothpick trick, while the USB Stick is in the lower USB 2 Port !!!
3. Go on "Apply update from SD-Card"
4. Take the first entry (for me it was the needed USB Stick)
5. You will see the update.zip
6. Choose this file and let it install
7. You will have to wait some minutes. The box reboots and will reboot into system (about 7-8 minutes or so)
8. i forgot

Happy flashing..

[gksureshkumar]

Try this:
Copy the Upgrade file .zip to SD Card root directory, insert into the SD slot of your device, get a toothpick into the Hole long press, then connect to power cable, turn on the device and still a toothpick long press into hole till the logo image turns out.

Thank you for your tip Mr.MartaN. Can you please explain how to copy the zip file to SD card root directory. How to go Root directory of SD card

[MartaN]

Dear friend i tried to do it with a toothpick and it is not going to recovery mode. It is still stuck in TX6S Logo only. Display shows as Booting. The box is not at all working any more. Please help

Try this:
Copy the Upgrade file .zip to SD Card root directory, insert into the SD slot of your device, get a toothpick into the Hole long press, then connect to power cable, turn on the device and still a toothpick long press into hole till the logo image turns out.

[gksureshkumar]

Hi mate, i think try put toothpick to the hole between SPDF and two USB ports on back side to do a hard reset while starting box.

Dear friend i tried to do it with a toothpick and it is not going to recovery mode. It is still stuck in TX6S Logo only. Display shows as Booting. The box is not at all working any more. Please help

[MartaN]

Dear friends i have bricked my TX6S Box. It has stuck in booting with TX6S Logo. How to go into the recovery mode for factory reset. Please provide me the steps one by one. I am a beginner. Please give complete steps. I want to un brick my new Box. Please help

Hi mate, i think try put toothpick to the hole between SPDF and two USB ports on back side to do a hard reset while starting box.

[gksureshkumar]

Tom, my name is also Tom...perhaps YOU can help me.

Could you go to stock recovery and make a backup file and send to me or upload ? Would be very nice.

I have also the 4G/64GB Version and tried to activate the navbar in the build.prop.
But something did not work and now i have bootloop and cannot boot more to my system. Only to stock recovery i can.

If i would have this backup file, i could make restore and get back my system.

The Tom´s must help each other, waiting and hoping on you...

Mr.Tombraga can you tell me the steps to go to recovery. I am stuck in bootloop and bricked my box TX6S.

[MartaN]

Can someone with overheating problems (after update) send me the serial number of the box?

Hi Javimetal so ...S/N: CSH616P63C0074-H

[Javimetal]

Can someone with overheating problems (after update) send me the serial number of the box?

[gksureshkumar]

Dear friends i have bricked my TX6S Box. It has stuck in booting with TX6S Logo. How to go into the recovery mode for factory reset. Please provide me the steps one by one. I am a beginner. Please give complete steps. I want to un brick my new Box. Please help

[Javimetal]

If possible (current work limitations in China), a new update will be released tomorrow for those facing overheating.

I can't say it is 100% sure to be released tomorrow.

[Javimetal]

this update is terrible


now with this update my second box shows wifi 5g, but the speed is very slow.

but big problems now with this beta update: all streams Youtube, Iptv (tivimate), kodi cannot be played smoothly, very, very bad quality...something is wrong with this update, Tanix - please resolve

This and overheating are the the main issues, right?

Overheating is not appearing to the engineers, so, not sure if related to certain version of the previous firm only.

Most of companies back to work today (due to coronavirus), but some guys can't or they are trapped in quarantine areas. It is going to take time...