TANIX TX6S Allwinner H616 Android 10.0 TV Box 2GB/16GB 2.4G+5.8G WiFi LAN Bluetooth

[Boxer]

@Funkoyote
As I understand it you have a TX6S with the Transpeed-H616_4-32_20200812 firmware.
That's right?

As I understand @Funkoyote the tweaked firmware is based on Transpeed-H616_ATV_OT.DO_20200812_1008

[webipsum]

@Funkoyote
As I understand it you have a TX6S with the Transpeed-H616_4-32_20200812 firmware.
That's right?

[webipsum]

For me the most important thing is to maintain a stable resolution at 4k. The stock Tanix firmware don't allow it to me, but the Transpeed firmware bring me stable 4K resolution.

Funkoyote
Thank you for your comment.
Your post appeared here as unapproved.
Suggestion: edit the quote, leaving only the first lines.
I configured the 3 firmwares in 4K and didn't notice the difference, but as this "TX6S has behaviors that neither Sigmund Freud and Erich Fromm explains ..." (lol)
Thanks.

[Funkoyote]

My experience with the Tanix TX6S box with the firmwares:

TX6S with STOCK FIRMWARE:

1. Tanix-Box_com-TX6s_android10_20200730.img
2. Temperature (board inside the case): 90 ° C / 100 ° C
3. Temperature (board removed from the case and heatsinks placed on the CPU and RAM (both sides of the plate)): 75 ° C / 85 ° C
4. Clock: OK!
5. widget: DOES NOT work. When configuring - without success - a widget, the message (tosted) returns: “Please turn off the" Don't keep activities "option in developer options.” I checked that in the developer options this option is OFF by default.
6. Magisk: Installation success. SuperUser working OK!
7. MagiskHide does not work. HBO GO identifies root. HBO GO does NOT work.
8. Accessibility permission: Accessibility permissions granted to apps are maintained, even when the box is reset.

TX6S with TRANSPEED ALTERNATIVE FIRMWARE:

1. Transpeed-H616_4-32_20200812.img
2. Temperature (board inside the case): not tested.
3. Temperature (board removed from the case and heatsinks placed on the CPU and RAM (both sides of the plate)): 75 ° C / 85 ° C
4. Clock: CRAZY! Display of numbers inverted vertically and some numbers, also inverted horizontally.
5. widget: DOES NOT work. When configuring - without success - a widget, the message (tosted) returns: “Please turn off the" Don't keep activities "option in developer options.” I checked that in the developer options this option is OFF by default.
6. Magisk: I was unable to install..
7. MagiskHide: I was unable to install.
8. Accessibility permission: Accessibility permissions granted to apps are NOT maintained when the box is reset. It is necessary to grant permissions every time the box is reset.

TX6S with T95 ALTERNATIVE FIRMWARE:

1. T95-H616-XR819-10.1.X18.img
2. Temperature (board inside the case): not tested.
3. Temperature (board removed from the case and heatsinks placed on the CPU and RAM (both sides of the plate)): 75 ° C / 85 ° C
4. Magisk: Installation success. SuperUser working OK!
5. MagiskHide WORKS. HBO GO does NOT identify root. HBO GO works.
6. Clock: OFF. Does not work!
7. widget: DOES NOT work. When configuring - without success - a widget, the message (tosted) returns: “Please turn off the" Don't keep activities "option in developer options.” I checked that in the developer options this option is OFF by default.
8. Accessibility permission: Accessibility permissions granted to apps are NOT maintained when the box is reset. It is necessary to grant permissions every time the box is reset.

CONCLUSION:
I am using the STOCK FIRMWARE.
REASON: The correct functioning of the accessibility permission is more important to me, at the moment, than HBO GO.

For me the most important thing is to maintain a stable resolution at 4k. The stock Tanix firmware don't allow it to me, but the Transpeed firmware bring me stable 4K resolution.

[webipsum]

My experience with the Tanix TX6S box with the firmwares:

TX6S with STOCK FIRMWARE:

1. Tanix-Box_com-TX6s_android10_20200730.img
2. Temperature (board inside the case): 90 ° C / 100 ° C
3. Temperature (board removed from the case and heatsinks placed on the CPU and RAM (both sides of the plate)): 75 ° C / 85 ° C
4. Clock: OK!
5. widget: DOES NOT work. When configuring - without success - a widget, the message (tosted) returns: “Please turn off the" Don't keep activities "option in developer options.” I checked that in the developer options this option is OFF by default.
6. Magisk: Installation success. SuperUser working OK!
7. MagiskHide does not work. HBO GO identifies root. HBO GO does NOT work.
8. Accessibility permission: Accessibility permissions granted to apps are maintained, even when the box is reset.

TX6S with TRANSPEED ALTERNATIVE FIRMWARE:

1. Transpeed-H616_4-32_20200812.img
2. Temperature (board inside the case): not tested.
3. Temperature (board removed from the case and heatsinks placed on the CPU and RAM (both sides of the plate)): 75 ° C / 85 ° C
4. Clock: CRAZY! Display of numbers inverted vertically and some numbers, also inverted horizontally.
5. widget: DOES NOT work. When configuring - without success - a widget, the message (tosted) returns: “Please turn off the" Don't keep activities "option in developer options.” I checked that in the developer options this option is OFF by default.
6. Magisk: I was unable to install..
7. MagiskHide: I was unable to install.
8. Accessibility permission: Accessibility permissions granted to apps are NOT maintained when the box is reset. It is necessary to grant permissions every time the box is reset.

TX6S with T95 ALTERNATIVE FIRMWARE:

1. T95-H616-XR819-10.1.X18.img
2. Temperature (board inside the case): not tested.
3. Temperature (board removed from the case and heatsinks placed on the CPU and RAM (both sides of the plate)): 75 ° C / 85 ° C
4. Magisk: Installation success. SuperUser working OK!
5. MagiskHide WORKS. HBO GO does NOT identify root. HBO GO works.
6. Clock: OFF. Does not work!
7. widget: DOES NOT work. When configuring - without success - a widget, the message (tosted) returns: “Please turn off the" Don't keep activities "option in developer options.” I checked that in the developer options this option is OFF by default.
8. Accessibility permission: Accessibility permissions granted to apps are NOT maintained when the box is reset. It is necessary to grant permissions every time the box is reset.

CONCLUSION:
I am using the STOCK FIRMWARE.
REASON: The correct functioning of the accessibility permission is more important to me, at the moment, than HBO GO.


NOTA: Remote control with voice: the voice (CR) does not work in all 3 cases. To use voice (CR) it is necessary to remove the CR dongle from the USB and put again (with the box power on).

[webipsum]

bruski
I installed Magisk as per your tutorial.
SuperUser working OK.
Does MagiskHide, which hides the root for selected apps, work for you? Does not work here.
Grateful for the attention.

Note: Firmware Tanix-Box_com-TX6s_android10_20200730.img

[webipsum]

bruski
Is there a temporary TWRP to backup / restore the TX6S?
Or another way to backup / restore the TX6S?
Tks.

[webipsum]

Hi
An obs
Only the native De tanix that works with the perfect watch on the display
With the others it is inverted or goes out and the display does not work An obs

Always Young bruski
You're absolutely right!

My tests in the TX6S:

1) Stock firmware: TX6s_android10_20200730 OK!
Clock OK 100%

2) Transpeed-H616_4-32_20200812.img OK!
Crazy Clock !: Display numbers are flipped vertically and some flipped horizontally!

3) T95-H616-XR819-10.1.X18.img OK!
Invisible Clock (lol): The display does not work. Display OFF.

Hugs.

[bruski]

[QUOTE=webipsum;n816681]Hi.

I installed the firmware T95-H616-XR819-10.1.X18.img. It worked correctly.
Regarding root, the behavior is the same as for Transpeed-H616_4-32_20200812.img.
Applications that check for root say yes, but it is not possible to assign the permissions that some applications request.
Once the firmware (T95-H616-XR819-10.1.X18.img) is applied, it is possible to see that it has an update (OTA).
I can download but despite the update app going ahead, restarting the box and etc., the update is not applied.
I found the newest firmware (T95-H616-XR819-10.1.X19.img), but when I apply in the TX6S, it freezes at startup.

I returned the firmware: T95-H616-XR819-10.1.X18.img

My tests in the TX6S:

1) Stock firmware: TX6s_android10_20200730 OK!
Note 1: Temperatura 90ºC/95°C.

2) Transpeed-H616_4-32_20200812.img OK!
Note 1: Stock firmware root is more complete.
Note 2: Temperature 70ºC / 75ºC.

3) T95-H616-XR819-10.1.X18.img OK!
Note 1: Stock firmware root is more complete.
Note 2: Temperature 70ºC / 75ºC.

4) T95-H616-XR819-10.1.X19.img Not work!
Note 1: TX6S freezes at startup. Freeze in the T95 screen.

5) YDS-VONTAR-X1-10.1.A19.img Not work!
Note 1: TX6S freezes at startup. Freeze in the T95 screen.

6) T95-H616-AW859A-10.1.A19.img Not work!
Note 1: TX6S freezes at startup. Freeze in the T95 screen.

I will try to install Magisk.
But information and tools like TWRP, Magisk and root are few for boxes with Allwinner H616. Unlike Amlogic.

Best regard.[/QUOTE

Hi
An obs
Only the native De tanix that works with the perfect watch on the display
With the others it is inverted or goes out and the display does not work An obs

[webipsum]

Hi.

I installed the firmware T95-H616-XR819-10.1.X18.img. It worked correctly.
Regarding root, the behavior is the same as for Transpeed-H616_4-32_20200812.img.
Applications that check for root say yes, but it is not possible to assign the permissions that some applications request.
Once the firmware (T95-H616-XR819-10.1.X18.img) is applied, it is possible to see that it has an update (OTA).
I can download but despite the update app going ahead, restarting the box and etc., the update is not applied.
I found the newest firmware (T95-H616-XR819-10.1.X19.img), but when I apply in the TX6S, it freezes at startup.

I returned the firmware: T95-H616-XR819-10.1.X18.img

My tests in the TX6S:

1) Stock firmware: TX6s_android10_20200730 OK!
Note 1: Temperatura 90ºC/95°C.

2) Transpeed-H616_4-32_20200812.img OK!
Note 1: Stock firmware root is more complete.
Note 2: Temperature 70ºC / 75ºC.

3) T95-H616-XR819-10.1.X18.img OK!
Note 1: Stock firmware root is more complete.
Note 2: Temperature 70ºC / 75ºC.

4) T95-H616-XR819-10.1.X19.img Not work!
Note 1: TX6S freezes at startup. Freeze in the T95 screen.

5) YDS-VONTAR-X1-10.1.A19.img Not work!
Note 1: TX6S freezes at startup. Freeze in the T95 screen.

6) T95-H616-AW859A-10.1.A19.img Not work!
Note 1: TX6S freezes at startup. Freeze in the T95 screen.

I will try to install Magisk.
But information and tools like TWRP, Magisk and root are few for boxes with Allwinner H616. Unlike Amlogic.

Best regard.

[Boxer]

Boxer
I understand.
Are you using this version?:
Transpeed-H616_4-32_20200812
Thankful.

Yes, this is the version I have been using for some time now.

[webipsum]

No I haven't considered rooting the Transpeed firmware.

Boxer
I understand.
Are you using this version?:
Transpeed-H616_4-32_20200812
Thankful.

[Boxer]

Boxer

Which firmware do you currently use on your TX6S?
If it is the Transpeed H616, did you manage to root it?

Grateful for the answer.

No I haven't considered rooting the Transpeed firmware.
??????

[webipsum]

T95 H616:

https://chinagadgetsreviews.com/download-android-10-stock-firmware-for-sunvell-t95-tv-box-with-dual-band-wifi.html

I am downloading. Did you test it?

Bqeel B1 Max:

https://www.bqeel.net/download.html

The link leads to a sharing request on Google Drive.
I did it a few days ago, 2 times, but sharing doesn't happen.
Did you test it?

Boxer

Which firmware do you currently use on your TX6S?
If it is the Transpeed H616, did you manage to root it?

Grateful for the answer.

[Boxer]

I haven't tested the T95 H616 and Bqeel B1 Max firmwares (I couldn't get the firmware).

T95 H616:

https://chinagadgetsreviews.com/download-android-10-stock-firmware-for-sunvell-t95-tv-box-with-dual-band-wifi.html

Bqeel B1 Max:

https://www.bqeel.net/download.html