UPDATED - CX919 - 4.2.2 - Finless ROM 1.6b

[britoso]

HI, I'm not familiar with Clockwork Mod. Does this not need a PC connection? Where can I learn how to use it?

It should allow you to choose a file from the sdcard, which you can load with a sdcard reader on your PC.
Steps: http://blog.geekbuying.com/index.php...cks-is-coming/

I dont know if normal .img ROMS can be installed from this CWM recovery, or if you need a flashable .zip file with install script built in.

[onehung]

Using Clockwork Mod

Its not just yours, just low build quality. Both of mine have the same.

Another option is to try using clockwork mod recovery. I have not done this myself.

HI, I'm not familiar with Clockwork Mod. Does this not need a PC connection? Where can I learn how to use it?

[britoso]

Hi, my CX919 has a dodgy OTG port. Is it possible to flash a new ROM via the full USB Port?

Its not just yours, just low build quality. Both of mine have the same.

Another option is to try using clockwork mod recovery. I have not done this myself.

[onehung]

Can I flash via full USB port

Hi, my CX919 has a dodgy OTG port. Is it possible to flash a new ROM via the full USB Port?

[brubeiker]

Hello, my problem is that when i flash a official ROM, the mouse-keyboard usb not detected unless i connect it via the OTG cable, but it to the USB MOUSE port not found, I must have to do something special? an app to detect the air mouse?


On the other hand if I put a ROM cooked as finless 1.6b or 2.0, everything works fine (XBMC 13.1, 3.4 BEYOND XBMC, Splive, IPTV) but when I connect the hard drive no sees it, if it detects a usb 4 Gigas but no hard drive, anyone know how I can to fix this?? Must i do something special or install any app?

[britoso]

Kernel should read in settings as
Simon@simon-desktop#411
I believe bob uses a no overclock kernel from the same source so it's a possibility it's showing the same , if you load cpu-z from the play store it should show your cpu running up to 1700 that way you'll know you've got the kernel loaded
P's this kernel also runs the stock cx919 firmware with no problems giving improvement in video playback and speed , well worth a try

I have

simon@simon-desktop#437, Sept 4 2013

and that did not change after flashing sam321's kernel.

"kernel1080_simon_no_oc.img - 1080P No Overclock with frame skip fix"
and
sam321's "1080p no overclock"
are the same, and they both have the blank internal flash bug.

Anyone have strauzo's kernel ? people have reported that that has the fix, however the thread has no valid download links.

[phughf]

Kernel should read in settings as
Simon@simon-desktop#411
I believe bob uses a no overclock kernel from the same source so it's a possibility it's showing the same , if you load cpu-z from the play store it should show your cpu running up to 1700 that way you'll know you've got the kernel loaded
P's this kernel also runs the stock cx919 firmware with no problems giving improvement in video playback and speed , well worth a try

[britoso]

Just flashed it using the flash tool in bob's 1.6b rom changing the kernel to the folder path with the rom in it ]

Please verify it shows the new kernel in system->about

I have a screenshot here:

http://www.freaktab.com/showthread.php?6185-overclocked-kernel-and-Frame-skipping-fix-for-the-new-Ap6210-WiFi-MK802-IV-or-UG007B-or-cx-919&p=193014&viewfull=1#post193014

[phughf]

Just flashed it using the flash tool in bob's 1.6b rom changing the kernel to the folder path with the rom in it ]

[britoso]

Yeah I've had no problems at all,bob's kernel crashes archos player that I use within xbmc to play mkv files with dts sound

How did you flash it ?
I tried just flashing the kernel file , it succeeded, but the old kernel values show up in settings->about device.

Edit:

For this kernel to work you must have a rom that does not have the kernel in the boot partition

This ROM must have it in the boot partition. Arg.

[phughf]

Yeah I've had no problems at all,bob's kernel crashes archos player that I use within xbmc to play mkv files with dts sound

[britoso]

Have a look here I'm running the 1.7 1000mhz ram kernel on my cx919 with this rom and it runs flawless no frame skip on video and is super fast
http://www.freaktab.com/showthread.p...007B-or-cx-919

Bob has frame skipping kernels too in the original post. Is the blank internal flash bug gone in this OC kernel?

[phughf]

Have a look here I'm running the 1.7 1000mhz ram kernel on my cx919 with this rom and it runs flawless no frame skip on video and is super fast

http://www.freaktab.com/showthread.php?6185-overclocked-kernel-and-Frame-skipping-fix-for-the-new-Ap6210-WiFi-MK802-IV-or-UG007B-or-cx-919

[shaxs]

I'm looking too.

These two threads are promising but the 1080P fixed strauzo kernel download links ar enot working

http://www.freaktab.com/showthread.php?5661-CX-919-quot-Blank-Internal-Flash-quot-Error-after-Running-for-Some-Time/page4

http://www.freaktab.com/showthread.php?5794-MK908-Strauzo-Kernel

This link works, have not tried installing it
http://www.freaktab.com/showthread.p...ll=1#post88235

1080p wont work for me. This is connecting to an AppRadio 3 which is a 7" screen

[shaxs]

I flashed with "kernel720_stock.img" that was in the download. Internal memory blank error seems to be gone. But wifi keeps dropping and picking back up often. Sigh.