The box is now with Android 10
I found the firmware in 4PDA
I found the firmware in 4PDA
-
-
I try it, i don't know if it's not a fake Android 10
See a screensghot of X-plore (directly installed) with others installed apks
-
good, works ;-)Comment
-
-
can you help me where i find firmware 7.1 or 8.1 for H96 Max Rk3318? because I want to use Hijack and it is not compatible with recent Android.Comment
-
My TV Box is H96 Max Plus 4 / 64gb RK3328.
But I Flash with Firmware H96 Max RK3318 Android 10, and the result is very good, everything works normally,
not only flash and I have also succeeded in Root Firnware H96 max rk3318 Android 10 with Magisk.
Here I will tell you how to Root H96 max Android 10 with Magisk.
You download the material first, click the link below.
After downloading you extract the file, there are two files, you install the Magisk manager apk, then you just move magisk_patched.img to the storage sdcard / Download / ....
Now it's up to you Execution ...
Go to Settings then scroll to Device Preferences then you scroll again to Developer Options, scroll again to (Go to loader) click "Select Image to Flash Dengerous: This operation can cause system instability"
There you just need to point to the file "magisk_patched.img", then there are several options, you select the "boot" then click OK.
Wait a few seconds until finished Flash.
Finally, you just need to reboot the device.
After the device turns back on, then Open Magisk Manager, which was already installed.
And Taraaaa .... It worked !!!
Link ;
https://mega.nz/file/hvYhSCAZ#gSrEde...hg-md8onMertDg
Last edited by widi23; 19 September 2020, 08:30.Comment
-
-
hello my friend i did the update of rk3318 but i lost the wifi connect help plzOriginally posted by widi23 View PostMy TV Box is H96 Max Plus 4 / 64gb RK3328.
But I Flash with Firmware H96 Max RK3318 Android 10, and the result is very good, everything works normally,
not only flash and I have also succeeded in Root Firnware H96 max rk3318 Android 10 with Magisk.
Here I will tell you how to Root H96 max Android 10 with Magisk.
You download the material first, click the link below.
After downloading you extract the file, there are two files, you install the Magisk manager apk, then you just move magisk_patched.img to the storage sdcard / Download / ....
Now it's up to you Execution ...
Go to Settings then scroll to Device Preferences then you scroll again to Developer Options, scroll again to (Go to loader) click "Select Image to Flash Dengerous: This operation can cause system instability"
There you just need to point to the file "magisk_patched.img", then there are several options, you select the "boot" then click OK.
Wait a few seconds until finished Flash.
Finally, you just need to reboot the device.
After the device turns back on, then Open Magisk Manager, which was already installed.
And Taraaaa .... It worked !!!
Link ;
https://mega.nz/file/hvYhSCAZ#gSrEde...hg-md8onMertDgComment
-
hello my friend i did the update of rk3318 but i lost the wifi connect help plzOriginally posted by manu_manu4 View PostThe box is now with Android 10
I found the firmware in 4PDA
https://drive.google.com/drive/folde...ToCAWftFgAWLJbComment
-
I just finished flashing my rk3318 with update and then rooted it with Magisk everything works perfectly, I would try to reflash with fresh download. Or if you go into Developer Options, use the flash in there to target a specific partition with an extracted image. There is a rockchip tool for extracting from install images and then everything is separated by partition.Originally posted by catalaman View Post
Note: if your rooting make sure and install Magisk manager first then use that to make your boot.img then after you flash reboot.
Sent from my moto g(8) power using Tapatalk
Comment
-
I tried doing this but didn`t work for meOriginally posted by widi23 View PostMy TV Box is H96 Max Plus 4 / 64gb RK3328.
But I Flash with Firmware H96 Max RK3318 Android 10, and the result is very good, everything works normally,
not only flash and I have also succeeded in Root Firnware H96 max rk3318 Android 10 with Magisk.
Here I will tell you how to Root H96 max Android 10 with Magisk.
You download the material first, click the link below.
After downloading you extract the file, there are two files, you install the Magisk manager apk, then you just move magisk_patched.img to the storage sdcard / Download / ....
Now it's up to you Execution ...
Go to Settings then scroll to Device Preferences then you scroll again to Developer Options, scroll again to (Go to loader) click "Select Image to Flash Dengerous: This operation can cause system instability"
There you just need to point to the file "magisk_patched.img", then there are several options, you select the "boot" then click OK.
Wait a few seconds until finished Flash.
Finally, you just need to reboot the device.
After the device turns back on, then Open Magisk Manager, which was already installed.
And Taraaaa .... It worked !!!
Link ;
https://mega.nz/file/hvYhSCAZ#gSrEde...hg-md8onMertDg
Comment
-
-
-
Comment