[ROM] Mod: HK1 X3 / H96 max X3 / VONTAR X3 / Transpeed X3 Air / Bqeel Y8 Max (Amlogic S905X3)

[webipsum]

Hello, Master ath156
I updated Magisk and Check SafetyNet OK!
Does the fact that it passed ok on SafetyNet, mean that the device is now Accredited by Google? In other words, Netflix and others start to run in HD, 4K, etc.?
Tks a lot!

[ath156]

If you have problems passing SafetyNet with Magisk,please have a look here:

https://forum.xda-developers.com/t/safetynet-evaltype-n-a-bug.4267461/#post-84902135

Therefore download and install "SafetyNet Status" from Play Store to check.

If you are passing safetynet with "SafetyNet Status" application from PlayStore, but you are still getting the "API error" in Magisk check of SafetyNet, there is a fix of it by the developer of Magisk.
So download the "app-debug.apk" from here:

https://mega.nz/file/0slFQCpT#hegmQma5iRlefKZZo8yWZUQXX1vziqI5Bm6bFa6l25A

Install "app-debug.apk". Open Magisk and install (update) Magisk(it will become version fb800b5(22104).

[ath156]

If you have problems passing SafetyNet with Magisk,please have a look here:

https://forum.xda-developers.com/t/safetynet-evaltype-n-a-bug.4267461/#post-84902135

Therefore download and install "SafetyNet Status" from Play Store to check.

[ath156]

There is a new magisk update from version 22.0 to 22.1. You can safely update to it also (1st the lower part and then the upper part and reboot).

[ziazian]

And since I already posted the way to pass Safety Net in the X88 King thread, here is the way to pass Safety Net in my custom rom and magisk v.22.0
https://mega.nz/file/VolBHaBQ#hZNIjD...A5AECpITmd-te8

Rom is very good, thanks for job. One thing is bad, no Vulkan support. Not all games from google play store works, not support for Vulkan in emulators. Please, if You can make rom with Vulkan support or better flashable zip, please, do it. Thanks.

[ath156]

And since I already posted the way to pass Safety Net in the X88 King thread, here is the way to pass Safety Net in my custom rom and magisk v.22.0

https://mega.nz/file/VolBHaBQ#hZNIjDLK7gIJptQ0rGn5ltw1jK9EOA5AECpITmd-te8

[ath156]

To update Magisk to version 22.0 (latest) do as described here: https://mega.nz/file/lsdGjRiL#kVxFqQ...9z9s7JM4TuGIlI

[Atif Munir]

There is a new version of H96 max X3 with BLUE board. Most of them seem to have as wifi chip a WP6330. In such a version probably there is no problem and you can use any of the existing firmwares (original+custom) and of course mine.
But according to this post https://forum.freaktab.com/forum/tv-...ernet-problems there must be a version with BLUE board and wifi chip WP6334, for which if you load any of the existing firmwares you may loose your wifi?

EDIT 30/11/2020 : Already fixed (see here https://forum.freaktab.com/forum/tv-...880#post816880)

Please give me this launcher which you set in display picture, i need it for rk3328 device

[ath156]

As I did a new clean install of my custom rom to H96 max X3, I prepared a file with instructions to help you update Magisk directly to latest version 22.0. Not everybody needs to do this update.

https://mega.nz/file/lsdGjRiL#kVxFqQ-LFeL8JhCmksiuNpejNXml19z9s7JM4TuGIlI

Please report if you have any problem with these instructions and the update.
I have another file with instructions of how to pass SafetyNet with magisk v.22.0 (I will sent it by PM to anybody intrested - but 1st they must have updated to v22.0).

[get2abbey]

Did you finally succeed in connecting the PS4 controller or the BT speaker? I don't have a PS4 controller to test, but I have a couple of BT speakers. When I find some time I will certainly test them. Also if you still are using this firmware see option (3) in my #250 post.

Thanks… I will give it a try

[ath156]

Thanks again for the quick response. I wanted to connect ps4 controller to play games and a JBL speaker

Did you finally succeed in connecting the PS4 controller or the BT speaker? I don't have a PS4 controller to test, but I have a couple of BT speakers. When I find some time I will certainly test them. Also if you still are using this firmware see option (3) in my #250 post.

[ath156]

Thanks again for the quick response. I wanted to connect ps4 controller to play games and a JBL speaker

If you want the latest stock rom you can download it from here: https://drive.google.com/drive/folde...eOH2S1nkXytx7a

[get2abbey]

I asked you about the color of the board because if you had one with Blue board and wifi chip IT6334 then you would have no wifi+BT unless you used the special custom rom for it.
I also have an H96 max X3 with Green board. I just connected my smartphone Xiaomi Note 4 with my H96 max X3 through Bluetooth. I transfered a file from my smartphone to my H96 and another file from H96 to my smartphone using BT. No problem with it. I don't know if you want BT for some other function e.g. BT headphones (I never used it for this purpose).
To enable BT there are at least 2 ways:
1. Settings-More Settings-BT-Search for BT devices there and enable BT
or
2. Drop down (with a mouse or airmouse) the notification panel (dragging from the top of the screen), expand the upper part of it, enable the BT icon.

Thanks again for the quick response. I wanted to connect ps4 controller to play games and a JBL speaker

[ath156]

Thanks for the prompt response.

I have I green board, Wifi is working perfectly… as I mentioned earlier EVERYTHING work well except bluetooth

I asked you about the color of the board because if you had one with Blue board and wifi chip IT6334 then you would have no wifi+BT unless you used the special custom rom for it.
I also have an H96 max X3 with Green board. I just connected my smartphone Xiaomi Note 4 with my H96 max X3 through Bluetooth. I transfered a file from my smartphone to my H96 and another file from H96 to my smartphone using BT. No problem with it. I don't know if you want BT for some other function e.g. BT headphones (I never used it for this purpose).
To enable BT there are at least 3 ways:
1. Settings-More Settings-BT-Search for BT devices there and enable BT
or
2. Drop down (with a mouse or airmouse) the notification panel (dragging from the top of the screen), expand the upper part of it, enable the BT icon.
or
3. Maybe the best option is to create a square in the Square Home Launcher "Press +" - "Shortcut" - "Quick Options".
From there you can easily enable/disable BT, find more options, see which devices are already connected or search for new ones.

[get2abbey]

There must be no problem with Bluetooth (at least problems that I am aware of). Do you have a blue board or a green board? Do you have wifi?

Thanks for the prompt response.

I have I green board, Wifi is working perfectly… as I mentioned earlier EVERYTHING work well except bluetooth