If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
The box is not recognized when plug in.
I have to short the pin on the emmc to let the pc recognize this device.
The I tried bumerc S905L firmware, failed at 7%.
Tried jimennis T95M P212 firmware, failed at 2%.
Aidan's universal ATV firmware, failed at 7%.
Is there anything I did wrong?
1. Download this script.
2. Burn aml_upgrade_package to the mSD card with Burn Card Maker.
3. Copy the script to the FAT partition of the prepared mSD card.
4. Now insert the mSD into the box, short-circuit the MaskROM pins on the eMMC.
5. Start the box and release the pins after approx. 2 seconds. The script now resets the eMMC memory to the delivery status.
6. Remove mSD from the box and repeat UBT installation
1. Download this script.
2. Burn aml_upgrade_package to the mSD card with Burn Card Maker.
3. Copy the script to the FAT partition of the prepared mSD card.
4. Now insert the mSD into the box, short-circuit the MaskROM pins on the eMMC.
5. Start the box and release the pins after approx. 2 seconds. The script now resets the eMMC memory to the delivery status.
6. Remove mSD from the box and repeat UBT installation
bumerc , I follow your instruction but it seems not helping to resolve this issue.
Does the mSD partition must be FAT(16) or okay with FAT32 or exFAT?
I formatted as FAT32 but doesn't work.
On the step 4, with the sd card inserted, computer won't detect the box when I short the pins.
I waited for 30 seconds, move on the step 5, eject the sd card, the box is detected.
Kick off the UBT flashing, failed at 7% with your firmware and the another one.
bumerc
I give another try with your S905L firmware.
On the step 4, with the sd card inserted, computer won't detect the box when I short the pins.
I waited for 30 seconds, move on the step 5, eject the sd card, the box is NOT detected as well........
What should I do then?
If the box cannot be detected, I cannot do UBT process.
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment