Android 13 ATV AMLOGIC S912 (Lineage OS 20) LPDDR3

[bumerc]

TV says no signal with TX92 HDMI port using your latest build https://forum.freaktab.com/node/8321...824#post833824

I grabbed Higwaystar's build and try wether HDMI port is damaged and wether thats the reason for failing

Can you see the u-boot logo? Or just a black screen? Would indicate u-boot incompatibility. My v6 (h96pp) board boots and works without any problems

[soldiaz]

No see nothing, just blank screen, blue light on device

[bumerc]

No see nothing, just blank screen, blue light on device

I started compiling the firmware for TX92 (platform q201), you can try it later..
However, I don't have an ir-remote config for this device, but it can be integrated later

[soldiaz]

I flashed HighwayStar build and could have been my fault maybe the hdmi cable wasnt connected properly. Ill reflash your build and check everything again

[soldiaz]

Your build works! Its hdmi port on my side! Reflashed and booting up right now...Ill report

Report: Dam really great work! Wifi and BT working....device Tx92 / Vorke

[Computeraar]

Firmware based on LOS-19.1 ATV12 + gapps
For H96pro+ 3/32 set-top boxes

Fixed Wi-Fi - BT issue

Revision support:
CZ-S32-V5 (LPDDR3) 3g
CZ-S32-V6 (LPDDR3) 3g
CZ-S32-V6.1 (LPDDR3) 3g

WiFi-BT - HS2834A (QCA9377)
1000M eth

Wi-Fi, BT, LAN, USB ports, native remote control, complete shutdown of LEDs in hibernation mode, on. - blue, sleep - red.

download

Would it be possible to get this working on the Minix Neo U9-H? What would I need to do to get it to work? It has:
- S912 processor
- 16GB eMMC storage
- 2GB DDR3 RAM

[bumerc]

Would it be possible to get this working on the Minix Neo U9-H? What would I need to do to get it to work? It has:
- S912 processor
- 16GB eMMC storage
- 2GB DDR3 RAM

has a different wifi chipset, you have to compile it from scratch

[ppromo47]

Thought could be a good idea to open new thread for devices using LPDDR3 like TX92, Vontar, H96+ pro....

Thanks bumerc for the hint!




Micron D9TXF >> MT52L768M32D3PU-107 WT:B (part number) max 933MHZ, LPDDR3

Build by HighwayStar :

HighwayStar bumerc
Thank you sharing this ROM, its much stable except for the bluetooth and WIFI, I have flashed it on my device Tanix tx92 [s912 LPRAM 3/32 QCA9377], will it be possible to provide a patch to get Bluetooth, WIFI and front LED working?

For now this since this is my secondary TV I am ok to use ny phone as remote control and it works perfectly fine

[soldiaz]

bumerc built one with working wifi and BT !!!!!

It must be around here....have to for it flashed it on my TX92

[bumerc]

HighwayStar bumerc
Thank you sharing this ROM, its much stable except for the bluetooth and WIFI, I have flashed it on my device Tanix tx92 [s912 LPRAM 3/32 QCA9377], will it be possible to provide a patch to get Bluetooth, WIFI and front LED working?

For now this since this is my secondary TV I am ok to use ny phone as remote control and it works perfectly fine

here

For vfd display you need a vfd driver, vfdservice daemon, corresponding dtb node, an entry in the *.rc file to run the daemon, sepolicy rules vfd_service_exec etc. and corresponding file_contexts entry (all these things are not included in this build). I use the openvfd driver + YAopenvfD daemon on my x96x9 device, works fine so far.

[soldiaz]

here

openvfd driver + YAopenvfD daemon on my x96x9 device, works fine so far.

Does that mean you running Daemon as apk ?

[bumerc]

Does that mean you running Daemon as apk ?

No, it's a regular binary file.

[ppromo47]

No, it's a regular binary file.

Ok I tried YAopenvfD from the link below, however when I run the command to check "modinfo openvfd" or "ls /proc/device-tree/openvfd" both says not found.

https://github.com/7Ji/YAopenvfD?tab=readme-ov-file

is there a readme or tutorial on how you got it working.

I am inclined at using A13 hence I wanted to check if there is patch for WIFI and Bluetooth which can be flashed on LOS20

[bumerc]

Ok I tried YAopenvfD from the link below, however when I run the command to check "modinfo openvfd" or "ls /proc/device-tree/openvfd" both says not found.

https://github.com/7Ji/YAopenvfD?tab=readme-ov-file

is there a readme or tutorial on how you got it working.

I am inclined at using A13 hence I wanted to check if there is patch for WIFI and Bluetooth which can be flashed on LOS20

You have to compile the driver and the daemon first. In A13 the bt stack was changed, there were problems with the hci interface. I haven't followed up on how it was fixed, but I couldn't use libbt-vendor for qca bt in los20. Patches are only on my PC, I didn't have time to put it on github. A guide would be too extensive, no time for that, maybe later

[ppromo47]

You have to compile the driver and the daemon first. In A13 the bt stack was changed, there were problems with the hci interface. I haven't followed up on how it was fixed, but I couldn't use libbt-vendor for qca bt in los20. Patches are only on my PC, I didn't have time to put it on github. A guide would be too extensive, no time for that, maybe later

No problem, I do understand your situation, thank you for your response.