[Collective Thread] CS968, CloudnetGo CR11s, TV01, UGOOS UG410

[webipsum]

Could you check if device gives output on both HDMI and A/V ports at the same time? I'd like to connect it to TV using HDMI and connect sound separately to my home cinema using A/V port (as I dont have optical port in it).

Bucz.
I tested here.
Cable A/V on device and A (white and red) in sound device.
HDMI on TV and sound ok in sound device.
Works fine!
Hope this helps.
Cheers.

[webipsum]

TVDroid.
I thought I could do through revovery Clockworkmod (Install zip from sdcard).
Hence the confusion and doubts.
So I can make like the [convict] instruct about the CS968-Geass.
Thank you again.

[TVDroid]

I think you can flash in both Methods.

My Stick runs so great now ...

[Bucz]

Bucz.
I tested here.
Cable A/V on device and A (white and red) in sound device.
HDMI on TV and sound ok in sound device.
Works fine!
Hope this helps.
Cheers.

Thanks a lot! I'm almost convinced to order this device but there's one more thing that worries me: the speed of ethernet port. Did you test local transfers from SMB shares? I'd be happy with 3MB/s which should guarantee always smooth 720p playback, but have bad experience with other Android stick and USB-RJ45 adapter...

[webipsum]

Thanks a lot! I'm almost convinced to order this device but there's one more thing that worries me: the speed of ethernet port. Did you test local transfers from SMB shares? I'd be happy with 3MB/s which should guarantee always smooth 720p playback, but have bad experience with other Android stick and USB-RJ45 adapter...

I use Ethernet connexion:
PC to External_SD (16G Class 4): Speed 4,83MB/s
PC to SDCard internal of the CS968: Speed 6.66MB/s.
720p, smooth playback, in the CS968.
Hope this helps.

[hanu_blr]

@tvdriod/webpisum

i guess u can flash with rktools only, not via CWM, since its has just *.img file, there is no cwm script to write in cwm mode.
BTW ur sound is via AMP or directly frm TV speakers ?.
I hv this problem, hv my cable STB and Cs968, connected via sound bar, when i use STB, stb sound is cut-off from soundbar if i switch off cs968. I hv to keep cs968 on to get stb sound via sound-bar if am watching cable stb .

I believe that the sound input device (in sound settings of cs968) is causing the issue, if i can disable the sound input radio button, then guess it shd fix the issue. from the GUI i cannot disable sound input device, tried to check in xml file, but did not get any info abt sound input device.

[webipsum]

@tvdriod/webpisum
i guess u can flash with rktools only, not via CWM, since its has just *.img file, there is no cwm script to write in cwm mode.

As I am still a beginner I'm learning by doing.
In fact, flash needs to be accomplished only through rktools. Not CWM.
For example, the stock firmware, or custom, replaced the CWM I had installed.
After I returned the CWM (Topic - cwm recovery for rk3188 - teacher leolas).
Tks hanu_blr.

We get a new stock firmware for this device, check it here:
http://blog.geekbuying.com/index.php...ndroid-tv-box/

Not work for me (CS968). Sometimes the screen blinked. I returned the previous firmware, but before I had to put the firmware CS968-Geass-V1, because I don't could run BusyBox.

[webipsum]

I think you can flash in both Methods.
My Stick runs so great now ...

TVDroid.
What is your device (stick)?
What is your firmware?
What is your launcher?
You use the CWM recovery?
Tks.

[FiNstar]

We get a new stock firmware for this device, check it here:

http://blog.geekbuying.com/index.php...ndroid-tv-box/

I downloaded this firmware, pre-root and delete all nonrelevant apps and all works great with my cs968! Also my remote and DTS passthrough SPDIF ... THX

@TVDroid
Which launcher and widget do you use? looks great.

[webipsum]

I downloaded this firmware, pre-root and delete all nonrelevant apps and all works great with my cs968! Also my remote and DTS passthrough SPDIF ... THX

@TVDroid
Which launcher and widget do you use? looks great.

FINstar. Please:
You could install the BusyBox?
You could apply the ClockWorkMod Recovery?
Ethernet continues with Not Internet Connection?
Could you talk a little more about the pre-root?
Your CS968 now has a new name: rk31sdk?
My CS968 is the Jesurun. And your CS968?
...Tks...

[FiNstar]

FINstar. Please:
You could install the BusyBox?
You could apply the ClockWorkMod Recovery?
Ethernet continues with Not Internet Connection?
Could you talk a little more about the pre-root?
Your CS968 now has a new name: rk31sdk?
My CS968 is the Jesurun. And your CS968?
...Tks...

Yes, I have installed BusyBox and works.
ClockWorkMod Recovery I havnt tested yet.
Ethernet shows still No Internet.
And my device shown as rk31sdk but I don´t know the Name of my CS968 just CS968..
Bought this one:

http://www.aliexpress.com/item/CS968-TV01-Android-TV-Box-Quad-Core-Smart-TV-Receiver-Webcam-Microphone-RK3188-1-6GHz-2G/1454448613.html

I have pre-root the firmware before flashing with some small tool from the xda-dev forum..here is the link:

http://forum.xda-developers.com/showthread.php?t=2489040

[webipsum]

Yes, I have installed BusyBox and works. ...
I have pre-root the firmware before flashing with some small tool from the xda-dev forum..here is the link:
http://forum.xda-developers.com/show....php?t=2489040

My CS968 is this here.

cfwtool.exe don't run. Windows 8 show this message: cfwtool.exe stopped working. With this, I can not pre-root and I can not install BusyBox to return the CWM recovery.

Tks. FINstar.

[Bucz]

I use Ethernet connexion:
720p, smooth playback, in the CS968.
Hope this helps.

Thanks, that's indeed enough for smooth playback.

[webipsum]

My CS968 is this here.

cfwtool.exe don't run. Windows 8 show this message: cfwtool.exe stopped working. With this, I can not pre-root and I can not install BusyBox to return the CWM recovery.

Tks. FINstar.

Please. FINstar.
cfwtool.exe and cfwtool.bat run now.
What is the sequence of steps that I use in "rockchip cfw tool"?
What the final image name?
...tks...

Note: Option 1: unpack - Option 3 - RK3188 - just only? Generate: miskercfw.img. I have not used option 2.pack everything and 3.pre-root.

[TVDroid]

Not work for me (CS968). Sometimes the screen blinked. I returned the previous firmware, but before I had to put the firmware CS968-Geass-V1, because I don't could run BusyBox.

For this Problem try 4x Erase NAND with "ROM_Flash_Tool_137" and than flash again this ROM.
Me helps this perfect.

TVDroid.
What is your device (stick)?
What is your firmware?
What is your launcher?
You use the CWM recovery?
Tks.

My Stick is a "Cozyswang S400" but i think its a Clone. See my Device here.
My Firmware is this.
I use the Nova Launcher Prime.
No i dont use any Recovery.

@TVDroid
Which launcher and widget do you use? looks great.

Thats the Nova Launcher Prime with "1Weather" Widget and "MemoryWigetS"