Announcement

Collapse
No announcement yet.

Announcement

Collapse
No announcement yet.

T-R42 B351 v1.1 PCB | Stockrom | Rooted | OC-Kernel and more... gnm!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    T-R42 B351 v1.1 PCB | Stockrom | Rooted | OC-Kernel and more... gnm!

    Hi Folkz.
    -------------------------------------------------------------------------------------------------------- - - - -
    *NEW*21.12.2013

    OC-Kernel-Pack *KLICK be careful with that what you´r doing!!! Stock is cpu1608 | gpu600 | ddr400
    And don't forget, it's all your own risk!

    -------------------------------------------------------------------------------------------------------- - - - -
    *NEW*
    20.12.2013

    T-R42 v1.1 Stock Root OC *KLICK
    -Rooted
    -Reboot App
    -Adobe Flash Plugin
    -Patched libmedia | DTS/Dolby HDMI Passthrough in XBMC
    -Patched V-Sync Overclocking-Kernel CPU@^1704mHz | GPU/DDR@^600mHz | THE SAFE WAY
    -Round about 20000 points @Antutu Benchmark
    -720p UI | 1080p Output
    -Debloated APKs separately packed | Stock Apps *KLICK
    -Tweaked build.prop
    -Spoofed as Galaxy S3 (by lewy20041)
    -New Base from DG10 Dongle (Thx to mg0179)

    THE FIRST BOOT NEED LONG TIME TO LOAD ALL APPS!
    AFTER A REBOOT AND ALL IS ONCE LOADED - IT WORKS FINE!

    Use No-Frills Cpu Controll to adjust frequencies!!
    --------------------------------------------------------------------------------------------------------- - - - -
    All content is for the B351 v1.1 PCB!
    (v1.0 not tested!!!)

    --------------------------------------------------------------------------------------------------------- - - - -
    *OLD*
    T-R42 v1.1 Stockrom *KLICK
    from Geekbuying untouched.

    Stock-Kernel-OC´d cpu@^1704mHz gpu@^600mHz ddr@^667mHz *KLICK
    It scales @cpu from 504 mHz and make round about 20000 points @Antutu Benchmark.
    The Voltage Setting are safe, but don´t cry if brick.
    -------------------------------------------------------------------------------------------------------- - - - -
    Over and out...

    Last edited by genom; 26 December 2013, 17:40.

    #2
    it really works

    it really works


    Originally posted by genom View Post
    Hi Folkz.

    T-R42 v1.1 Stockrom
    from Geekbuying untouched.

    Stock-Kernel-OC´d cpu@^1704mHz gpu@^600mHz ddr@^667mHz
    It scales @cpu from 504 mHz and make round about 20000 points @Antutu Benchmark.
    The Voltage Setting are safe, but don´t cry if brick.
    Use No-Frills Cpu Controll to adjust frequencies!!

    T-R42 v1.1 Stockrom rooted, cleaned and with CWM-recovery is in work.

    Over and out...

    Comment


      #3
      that's the firmware I got from the manufacturer

      please tell me if it works
      that's the firmware I got from the manufacturer

      http://pan.baidu.com/s/1kpZw8

      Comment


        #4
        This seems to be the firmware for the 3188T.
        I take a look...

        edit:the kernel must works 4 you!
        Last edited by genom; 15 December 2013, 03:04.

        Comment


          #5
          Originally posted by genom View Post
          This seems to be the firmware for the 3188T.
          I take a look...

          edit:the kernel must works 4 you!
          Originally posted by genom View Post
          Hi Folkz.

          T-R42 v1.1 Stockrom *KLICK

          from Geekbuying untouched.

          Stock-Kernel-OC´d cpu@^1704mHz gpu@^600mHz ddr@^667mHz *KLICK
          It scales @cpu from 504 mHz and make round about 20000 points @Antutu Benchmark.
          The Voltage Setting are safe, but don´t cry if brick.
          Use No-Frills Cpu Controll to adjust frequencies!!

          T-R42 v1.1 Stockrom rooted, cleaned and with CWM-recovery is in work.

          Over and out...

          Hello
          After the firmware need to separately install the kernel? Or kernel is stitched together with the firmware?

          Comment


            #6
            Originally posted by Sumash View Post
            Hello
            After the firmware need to separately install the kernel? Or kernel is stitched together with the firmware?
            separately

            Comment


              #7
              Originally posted by genom View Post
              separately
              How can i flash separately ?

              Comment


                #8
                Originally posted by muchacoado View Post
                How can i flash separately ?
                Need to flash the kernel separately prog ROM_Flash_Tool_137. Rename the desired kernel in kernel.img and throw in a folder FinlessROM, run the file ROM_Flash_Tool_137.exe, remove all jackdaws except kernel, connect the console to the PC mode firmware and click Flash ROM firmware wait until the end.

                Comment


                  #9
                  *NEW* Rooted Stockrom OC´d

                  Comment


                    #10
                    Originally posted by genom View Post
                    *NEW* Rooted Stockrom OC´d
                    It is not realy 1920 pixel. it is my fault?
                    Last edited by muchacoado; 20 December 2013, 20:04.

                    Comment


                      #11
                      Originally posted by muchacoado View Post
                      It is not realy 1920 pixel. it is my fault?
                      The UI is scaled 720p but Videoutput is 1080p like the Stock.

                      Comment


                        #12
                        Originally posted by genom View Post
                        The UI is scaled 720p but Videoutput is 1080p like the Stock.
                        Can you make a new firmware what in the Ui is 1080p ? (sorry my English)

                        Comment


                          #13
                          no 1080p ui in the moment...
                          Videooutput is 1080p and im still learning to get a 1080p Userinterface.. .
                          Last edited by genom; 21 December 2013, 11:23.

                          Comment


                            #14
                            Question

                            Originally posted by genom View Post
                            *NEW* Rooted Stockrom OC´d
                            Hi Genom,

                            I have a android smart tv box labeled B351_BT. The pcb inside is marked B351_V1.1.
                            Can you confirm that your image is working with this box.

                            Thanks in advance,
                            Louk Seton

                            Comment


                              #15
                              Originally posted by louk View Post
                              Hi Genom,

                              I have a android smart tv box labeled B351_BT. The pcb inside is marked B351_V1.1.
                              Can you confirm that your image is working with this box.

                              Thanks in advance,
                              Louk Seton
                              Confirmed! (see pic in first post)
                              I have the same box.
                              Last edited by genom; 21 December 2013, 12:33.

                              Comment

                              Working...
                              X