defective screen :(

[elim]

i have just recieved a pipo m9 max and just found out when i press hard on near the center of the screen you can see some sort of bright white lights lines like it wasnt glued properly

ive already rooted and flashed so should i return it? its going to be a long haul all the way back to china

[giouncino]

You can reflash stock ROM and proceed with the warranty.

[elim]

You can reflash stock ROM and proceed with the warranty.

any links to stock rom?

[FireRider]

Hi elim,
if your screen looks similar to the attached Pic you can fix it yourself.
Just let me know, I will post the workaround

[elim]

Hi elim,
if your screen looks similar to the attached Pic you can fix it yourself.
Just let me know, I will post the workaround

its only if its pressed down really hard.. i guess it does sort of look like this

[Dazman]

Hi elim,
if your screen looks similar to the attached Pic you can fix it yourself.
Just let me know, I will post the workaround

Hey Firerider,

I have something similar to that on my M7 Pro but without the yellowing around the ring. Could you post the fix for me? Thanx! Daz.

[TheEnvoy]

AW: defective screen

hey everyone,

i just had - as far as i can tell - this problem with my tab (black circle in middle of display) and short of returning it my vendor gave me the clue that saved me the trouble..

so here's what i got: the problem seems to occur when the tab is exposed to a sudden change in temperature - at least that was true for me

simple solution: get the tab working real hard, the tip i got was to let a video play in endless loop until the mark is gone (i used mxplayer), they said it could take some time, after some hours i helped the process along by placing the display in close proximity & facing the radiator.. and it really worked

.. so the magic ingredient was: heat

hope that helps, evenif the thread is somewhat old..

regards
TheEnvoy

Gesendet von meinem M7pro mit Tapatalk

[rrileypm]

Yeah, I have that same problem with my Pipo M5.

When I got it, it had a black bubble looking mark on the screen. It went away after several minutes of being on.

Now, I notice the spot returns if I don't turn the tablet on for a while...but it always goes away after several minutes of use. I think it is a weak seal in the glue or something.

[Osanos]

That is interesting...
On my Pipo m7, there suddenly appeared to be same problem after few days of using. I was scared that the screen is defective, but after several hours, when the tablet was turned off, it fortunately disappeared. Since then, that is almost a month, it is ok

[psilocibe]

Got the same issue as Firerider! Fortunately, I read this 3d and i was able to fix the problem as described above! Thanks a lot!