If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
TANIX TX6S Allwinner H616 Android 10.0 TV Box 2GB/16GB 2.4G+5.8G WiFi LAN Bluetooth
I agree the firmware is not very pleasant. Out of curiosity, what customisation did you do?
I've managed to install as default this Google TV launcher, which they recently introduced with the launch of the new Chomecast 4K.
The first attempt did not work, It could not charge and I had to reset the device. After the reset, I tried again without any active Google account, and this time it worked, as soon as it loaded, it asked me for the Google account data and it connected without problems.
Bqeel B1 Max: https://www.bqeel.net/download.html The link leads to a sharing request on Google Drive.
I did it a few days ago, 2 times, but sharing doesn't happen.
Did you test it?
I installed the firmware T95-H616-XR819-10.1.X18.img. It worked correctly.
Regarding root, the behavior is the same as for Transpeed-H616_4-32_20200812.img.
Applications that check for root say yes, but it is not possible to assign the permissions that some applications request.
Once the firmware (T95-H616-XR819-10.1.X18.img) is applied, it is possible to see that it has an update (OTA).
I can download but despite the update app going ahead, restarting the box and etc., the update is not applied.
I found the newest firmware (T95-H616-XR819-10.1.X19.img), but when I apply in the TX6S, it freezes at startup.
I returned the firmware: T95-H616-XR819-10.1.X18.img
My tests in the TX6S:
1) Stock firmware: TX6s_android10_20200730 OK!
Note 1: Temperatura 90ºC/95°C.
2) Transpeed-H616_4-32_20200812.img OK!
Note 1: Stock firmware root is more complete.
Note 2: Temperature 70ºC / 75ºC.
3) T95-H616-XR819-10.1.X18.img OK!
Note 1: Stock firmware root is more complete.
Note 2: Temperature 70ºC / 75ºC.
4) T95-H616-XR819-10.1.X19.img Not work!
Note 1: TX6S freezes at startup. Freeze in the T95 screen.
5) YDS-VONTAR-X1-10.1.A19.img Not work!
Note 1: TX6S freezes at startup. Freeze in the T95 screen.
6) T95-H616-AW859A-10.1.A19.img Not work!
Note 1: TX6S freezes at startup. Freeze in the T95 screen.
I will try to install Magisk.
But information and tools like TWRP, Magisk and root are few for boxes with Allwinner H616. Unlike Amlogic.
I installed the firmware T95-H616-XR819-10.1.X18.img. It worked correctly.
Regarding root, the behavior is the same as for Transpeed-H616_4-32_20200812.img.
Applications that check for root say yes, but it is not possible to assign the permissions that some applications request.
Once the firmware (T95-H616-XR819-10.1.X18.img) is applied, it is possible to see that it has an update (OTA).
I can download but despite the update app going ahead, restarting the box and etc., the update is not applied.
I found the newest firmware (T95-H616-XR819-10.1.X19.img), but when I apply in the TX6S, it freezes at startup.
I returned the firmware: T95-H616-XR819-10.1.X18.img
My tests in the TX6S:
1) Stock firmware: TX6s_android10_20200730 OK!
Note 1: Temperatura 90ºC/95°C.
2) Transpeed-H616_4-32_20200812.img OK!
Note 1: Stock firmware root is more complete.
Note 2: Temperature 70ºC / 75ºC.
3) T95-H616-XR819-10.1.X18.img OK!
Note 1: Stock firmware root is more complete.
Note 2: Temperature 70ºC / 75ºC.
4) T95-H616-XR819-10.1.X19.img Not work!
Note 1: TX6S freezes at startup. Freeze in the T95 screen.
5) YDS-VONTAR-X1-10.1.A19.img Not work!
Note 1: TX6S freezes at startup. Freeze in the T95 screen.
6) T95-H616-AW859A-10.1.A19.img Not work!
Note 1: TX6S freezes at startup. Freeze in the T95 screen.
I will try to install Magisk.
But information and tools like TWRP, Magisk and root are few for boxes with Allwinner H616. Unlike Amlogic.
Best regard.[/QUOTE
Hi
An obs
Only the native De tanix that works with the perfect watch on the display
With the others it is inverted or goes out and the display does not work An obs
Hi
An obs
Only the native De tanix that works with the perfect watch on the display
With the others it is inverted or goes out and the display does not work An obs
bruski
I installed Magisk as per your tutorial.
SuperUser working OK.
Does MagiskHide, which hides the root for selected apps, work for you? Does not work here.
Grateful for the attention.
My experience with the Tanix TX6S box with the firmwares:
TX6S with STOCK FIRMWARE:
Tanix-Box_com-TX6s_android10_20200730.img
Temperature (board inside the case): 90 ° C / 100 ° C
Temperature (board removed from the case and heatsinks placed on the CPU and RAM (both sides of the plate)): 75 ° C / 85 ° C
Clock: OK!
widget: DOES NOT work. When configuring - without success - a widget, the message (tosted) returns: “Please turn off the" Don't keep activities "option in developer options.” I checked that in the developer options this option is OFF by default.
Magisk: Installation success. SuperUser working OK!
MagiskHide does not work. HBO GO identifies root. HBO GO does NOT work.
Accessibility permission: Accessibility permissions granted to apps are maintained, even when the box is reset.
TX6S with TRANSPEED ALTERNATIVE FIRMWARE:
Transpeed-H616_4-32_20200812.img
Temperature (board inside the case): not tested.
Temperature (board removed from the case and heatsinks placed on the CPU and RAM (both sides of the plate)): 75 ° C / 85 ° C
Clock: CRAZY! Display of numbers inverted vertically and some numbers, also inverted horizontally.
widget: DOES NOT work. When configuring - without success - a widget, the message (tosted) returns: “Please turn off the" Don't keep activities "option in developer options.” I checked that in the developer options this option is OFF by default.
Magisk: I was unable to install..
MagiskHide: I was unable to install.
Accessibility permission: Accessibility permissions granted to apps are NOT maintained when the box is reset. It is necessary to grant permissions every time the box is reset.
TX6S with T95 ALTERNATIVE FIRMWARE:
T95-H616-XR819-10.1.X18.img
Temperature (board inside the case): not tested.
Temperature (board removed from the case and heatsinks placed on the CPU and RAM (both sides of the plate)): 75 ° C / 85 ° C
Magisk: Installation success. SuperUser working OK!
MagiskHide WORKS. HBO GO does NOT identify root. HBO GO works.
Clock: OFF. Does not work!
widget: DOES NOT work. When configuring - without success - a widget, the message (tosted) returns: “Please turn off the" Don't keep activities "option in developer options.” I checked that in the developer options this option is OFF by default.
Accessibility permission: Accessibility permissions granted to apps are NOT maintained when the box is reset. It is necessary to grant permissions every time the box is reset.
CONCLUSION:
I am using the STOCK FIRMWARE.
REASON: The correct functioning of the accessibility permission is more important to me, at the moment, than HBO GO.
NOTA: Remote control with voice: the voice (CR) does not work in all 3 cases. To use voice (CR) it is necessary to remove the CR dongle from the USB and put again (with the box power on).
My experience with the Tanix TX6S box with the firmwares:
TX6S with STOCK FIRMWARE:
Tanix-Box_com-TX6s_android10_20200730.img
Temperature (board inside the case): 90 ° C / 100 ° C
Temperature (board removed from the case and heatsinks placed on the CPU and RAM (both sides of the plate)): 75 ° C / 85 ° C
Clock: OK!
widget: DOES NOT work. When configuring - without success - a widget, the message (tosted) returns: “Please turn off the" Don't keep activities "option in developer options.” I checked that in the developer options this option is OFF by default.
Magisk: Installation success. SuperUser working OK!
MagiskHide does not work. HBO GO identifies root. HBO GO does NOT work.
Accessibility permission: Accessibility permissions granted to apps are maintained, even when the box is reset.
TX6S with TRANSPEED ALTERNATIVE FIRMWARE:
Transpeed-H616_4-32_20200812.img
Temperature (board inside the case): not tested.
Temperature (board removed from the case and heatsinks placed on the CPU and RAM (both sides of the plate)): 75 ° C / 85 ° C
Clock: CRAZY! Display of numbers inverted vertically and some numbers, also inverted horizontally.
widget: DOES NOT work. When configuring - without success - a widget, the message (tosted) returns: “Please turn off the" Don't keep activities "option in developer options.” I checked that in the developer options this option is OFF by default.
Magisk: I was unable to install..
MagiskHide: I was unable to install.
Accessibility permission: Accessibility permissions granted to apps are NOT maintained when the box is reset. It is necessary to grant permissions every time the box is reset.
TX6S with T95 ALTERNATIVE FIRMWARE:
T95-H616-XR819-10.1.X18.img
Temperature (board inside the case): not tested.
Temperature (board removed from the case and heatsinks placed on the CPU and RAM (both sides of the plate)): 75 ° C / 85 ° C
Magisk: Installation success. SuperUser working OK!
MagiskHide WORKS. HBO GO does NOT identify root. HBO GO works.
Clock: OFF. Does not work!
widget: DOES NOT work. When configuring - without success - a widget, the message (tosted) returns: “Please turn off the" Don't keep activities "option in developer options.” I checked that in the developer options this option is OFF by default.
Accessibility permission: Accessibility permissions granted to apps are NOT maintained when the box is reset. It is necessary to grant permissions every time the box is reset.
CONCLUSION:
I am using the STOCK FIRMWARE.
REASON: The correct functioning of the accessibility permission is more important to me, at the moment, than HBO GO.
For me the most important thing is to maintain a stable resolution at 4k. The stock Tanix firmware don't allow it to me, but the Transpeed firmware bring me stable 4K resolution.
Comment