Announcement

Collapse
No announcement yet.

[ROM] Beelink SEA I - 16Gb/32Gb Versions - SCV3 Beta

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    [ROM] Beelink SEA I - 16Gb/32Gb Versions - SCV3 Beta

    Hi there guys and girls, one more rom/fw for you all!
    Many thks to gearbest for sending me the device to play
    Many Thks to my beta testers trebor

    READ THE BUGS SECTION FOR UNNECESSARY QUESTIONS!!!!

    Changelog Beta V3:
    • Based on latest 105.
    • Added status bar auto hide.
    • Ftmc 16.2.29
    • Updated su to 2.81 (no still no supersu app... its blocked its install in the source)
    • And all the rest of previous roms.
    Tweaks Beta V3:
    • SAME TWEAKS AS V1


    Changelog Beta V2:
    • Based on latest 103 OTA.
    • Reorganized some apps and some links in the launcher!
    • Cast working ( it may not work the 1º time, but 2º time should work just fine )
    • Fixed manual resolution change ( Bug added in the latest OTA )
    • Removed Google remote control ( Sorry it was crashing and i could not fix it )
    • FTMC Build 26 ( I do recommend using external player for it, simple install mx player and mx armv7 neon codec from playstore, run mx player and enable HW+ dont touch anything else and close it, execute FTMC and then close it, open "total commander" and go to internal storage "Android/data/org.xbmc.ftmc/files/.ftmc/userdata" and put this file ( Click Here ) in there, close total commander and that is it, from now on mx player is used ONLY FOR LOCAL files, smb, internet files and streams are played by FTMC internal player... if you want to change that simple edit the file above to your needs... BTW FTMC MAKES TRANSPARENT THE USE OF EXTERNAL PLAYER NO NEED TO PRESS "OK'S" LIKE NORMAL KODI OR SPMC)
    • All other stuff from V1
    Tweaks Beta V2:
    • SAME TWEAKS AS V1

    Bugs Beta V2:
    • No SuperSU app since is installation is blocked in the sdk!
    • When wake up from sleep mode the display take some time to come back... dont worry it will turn on...
    • 1º time open any app it may take a few secs, this is how this sdk work...
    • Its takes time for the wifi to get the ip.. so wait...
    • HDCP remove only on the output no on the in input, for that you guys need someone to "hack" the hdmi in app!
    • Sometimes after power on you even if it says that is connect to the wifi of eth it dont have internet, reboot the box and it should be ok after that!
    • SPMC crashes, so dont install it!
    • Possible lot more Bugs...


    Changelog Beta V1:
    • Based on stock 102.
    • Removed HDCP key check ( No more "Missing HDCP Key" problem )
    • General optimization.
    • Changed governor from "ondemand" to my custom "interactive" one
    • Suspend mode fixed!
    • Enable by default samba!
    • OpenWrt samba optimization.
    • OpenWrt transmission start fix
    • Custom Wetek WebOs launcher (Many thks to wetek for let me use it)
    • - Menu Button is king on this launcher, its used to add remove icons on the main screen, also to remove widgets.
    • - Long press on the default icons on desktop you can change them to other apps (White Logos...)
    • - Long press on the icons you add to the deskop and you can rearrange them.
    • Live Wallpapers, From Android TV ( Read Tweaks Section on how to enable it )
    • Android TV remote control! ( download the app from playstore to your phone )
    • Netflix, youtube, playstore...etc... fully working ( No 4k Youtube, that is exclusive of Android TV roms )
    • initd.d support.
    • Xbox360 Gamepad Wired and Wireless support.
    • Playstore updated!
    • Permissions fixed.
    • Added Xposed Framework
    • FTMC Build 24
    • Permissive mode!
    • Added a few apps... included the zidoo "Hdmi Deception" it should work but i don't a way to test it!
    • And some other little stuff...
    Tweaks Beta V1:
    • 1. Settings - Developer options - Stay awake - OFF.
    • 2. Setting - Display - Daydream - ON - the upper right corner of the three points - When to daydream - While charging.
    • 3. Setting - Display - Daydream - select "Backdrop"
    • 4. Setting - When to daydream - choose the time after which screen saver turns on.
    • If Setting - Display - Daydream - OFF, after a specified time tv-box will go into standby mode

    Bugs Beta V1:
    • No SuperSU app since is installation is blocked in the sdk!
    • When wake up from sleep mode the display take some time to come back... dont worry it will turn on...
    • 1º time open any app it may take a few secs, this is how this sdk work...
    • Its takes time for the wifi to get the ip.. so wait...
    • HDCP remove only on the output no on the in input, for that you guys need someone to "hack" the hdmi in app!
    • In the 1º usage of the playstore it needs to update google services, so dont forget to do it!
    • Sometimes after power on you even if it says that is connect to the wifi of eth it dont have internet, reboot the box and it should be ok after that!
    • No Navigation Bar, notification bar cant be hidden also!
    • SPMC crashes, so dont install it!
    • Possible lot more Bugs...


    Want to buy me a beer?Download:Install instructions:
    • Read beelink instructions
    Where to buy:1º BOOT MAY TAKE AROUND 6 MINUTES MAYBE LESS!

    THIS ROM DELETES ALL YOUR DATA SO DO A BACKUP!


    USE AT YOUR OWN RISK!

    Enjoy it!
    Last edited by superceleron; 06-06-2017, 16:17.

    #2
    download now.....
    MINIX U1, MINI MXIII, MINI MXIII II, GT1, SEA I

    Comment


      #3
      error.... need to keyin *.bin
      MINIX U1, MINI MXIII, MINI MXIII II, GT1, SEA I

      Comment


        #4
        What version burning tool
        Use the first one not the key one
        tЯeboЯ
        Please consider
        Donating to Freaktab

        Comment


          #5
          Do this.... press "show info dlg" and in there change from "write factory" to "only upgrade firmware" open the img again and then close the app and open it again and load the img then connect the box and wait...

          Comment


            #6
            Mouse more responsive compare to stock firmware but not as good GT1
            overall better than stock...
            now no more door stopper at my room...

            missing bottom navigation...
            MINIX U1, MINI MXIII, MINI MXIII II, GT1, SEA I

            Comment


              #7
              Ok guys who downloaded plz re download... i upped another rom, same name but i fixed openwrt access with eth...
              And tweaked a bit more my custom governor!

              Comment


                #8
                Originally posted by KAA View Post
                error.... need to keyin *.bin
                open System.ini in usb_tool dir. Change
                WRITE FACTORY=0
                ONLY UPGRADE FIRMWARE=1

                Comment


                  #9
                  Thanks for the fast release of this custom rom superceleron,

                  Installed without issue Having a play now just added my own wallpaper and a few apps to the home screen.





                  What's the superceleron button for on the bottom left hand corner.

                  Oh the browser button on the stock remote don't work.

                  Donation on the way Thanks for all your time here

                  Please consider making a Donation to freakTab

                  Comment


                    #10
                    Glad you like it m8
                    The superceleron button is only a signature dont do nothing
                    About the browser button, need to check it
                    Btw thks for the donation

                    Comment


                      #11
                      Originally posted by superceleron View Post
                      Glad you like it m8
                      The superceleron button is only a signature dont do nothing
                      About the browser button, need to check it
                      Btw thks for the donation
                      No worries mate,Keep up the good work

                      Just an idea for the superceleron button,Maybe link it to your blog or the freaktab rom download
                      Please consider making a Donation to freakTab

                      Comment


                        #12
                        that is a nice idea, i will try add it but is hard since i dont have the source of it

                        Comment


                          #13
                          Sorry superceleron but I got to ask. There is no mention of lighthome launcher......So can the original Beelink lighthome launcher work, meaning will the big Kodi button work instead of the HDMI big button? And/or is the new lighthome launcher still in your new rom?

                          thanks for you hard work, as always!

                          Comment


                            #14
                            no SPMC for SEA I
                            MINIX U1, MINI MXIII, MINI MXIII II, GT1, SEA I

                            Comment


                              #15
                              Originally posted by jerry98vert View Post
                              Sorry superceleron but I got to ask. There is no mention of lighthome launcher......So can the original Beelink lighthome launcher work, meaning will the big Kodi button work instead of the HDMI big button? And/or is the new lighthome launcher still in your new rom?

                              thanks for you hard work, as always!
                              its not in mine...
                              if i have some free time i will make a kodi logo version and upped here!

                              Originally posted by KAA View Post
                              no SPMC for SEA I
                              No SPMC dont work on SEA... Dunno why since i dint debug it!

                              Comment

                              Working...
                              X