Announcement
Collapse
No announcement yet.
Announcement
Collapse
No announcement yet.
Kit Kat 4.4.2 RK3066 (Fully Working)
Collapse
This is a sticky topic.
X
X
-
Originally posted by Shomari View PostYour USB is likely giving out much more juice than that. In fact, I always do my testing of OC kernels connected to PC because it gives the most consistent, sufficient juice/current.
You'd be surprised just how crappy typical cheap power supplies commonly used with tv sticks are compared to a good/moderately decent PC power supply.
I had to came back to finless 2 rom, but i'll keep track to this rom, cause it had a great performance while it worked.
Thanks!
Comment
-
Originally posted by gatorojo View PostI had no lucky trying other supplies, the one that keep it on more time was a sony cybershot usb charger, but it finaly went off, the weirdest thing is that when i'd turned it on again there was no wifi available...
I had to came back to finless 2 rom, but i'll keep track to this rom, cause it had a great performance while it worked.
Thanks!
====================================
Also, what program are most users using to flash this ROM? I used RK Batch Tool v1.7 to flash and the flash was successful. The UG007-II boots up just fine.
However, when I go into Settings, click on the Wifi toggle, and while I'm typing in my Wifi password, the TV screen flickers once and the screen turns black. I have to pull the power plug & reconnect to reboot.
Same thing happens again in the Wifi settings screen. Also, the unit will flicker to a black screen while I'm just moving my cursor around on my Logitech K400 bluetooth keyboard with trackpad.
For now, I Nandroid'ed back to the official 4.2.2 UGOOS Jellybean ROM backup.
Comment
-
Originally posted by optimummind View PostIs your unit a UG007-II by any chance? I'm having similar blink-to-black-screen issues on my UG007-II and I know it's not my power supply. I'm not using the OEM power supply but a 5V, 2 amp Genuine Samsung USB charger which fixed my previous power supply issues.
====================================
Also, what program are most users using to flash this ROM? I used RK Batch Tool v1.7 to flash and the flash was successful. The UG007-II boots up just fine.
However, when I go into Settings, click on the Wifi toggle, and while I'm typing in my Wifi password, the TV screen flickers once and the screen turns black. I have to pull the power plug & reconnect to reboot.
Same thing happens again in the Wifi settings screen. Also, the unit will flicker to a black screen while I'm just moving my cursor around on my Logitech K400 bluetooth keyboard with trackpad.
For now, I Nandroid'ed back to the official 4.2.2 UGOOS Jellybean ROM backup.
Comment
-
Re: Kit Kat 4.4.2 RK3066 (Fully Working)
Originally posted by gatorojo View PostMine is MK809II Same hw and look than ugoo7II. Using the OEM Supply 5V-1A, i had no flickering it just went off... But no problemas with finless v2
Sent from my SPH-L720
Comment
-
Originally posted by gatorojo View PostI had no lucky trying other supplies, the one that keep it on more time was a sony cybershot usb charger, but it finaly went off, the weirdest thing is that when i'd turned it on again there was no wifi available...
I had to came back to finless 2 rom, but i'll keep track to this rom, cause it had a great performance while it worked.
Thanks!Originally posted by optimummind View PostIs your unit a UG007-II by any chance? I'm having similar blink-to-black-screen issues on my UG007-II and I know it's not my power supply. I'm not using the OEM power supply but a 5V, 2 amp Genuine Samsung USB charger which fixed my previous power supply issues.
====================================
Also, what program are most users using to flash this ROM? I used RK Batch Tool v1.7 to flash and the flash was successful. The UG007-II boots up just fine.
However, when I go into Settings, click on the Wifi toggle, and while I'm typing in my Wifi password, the TV screen flickers once and the screen turns black. I have to pull the power plug & reconnect to reboot.
Same thing happens again in the Wifi settings screen. Also, the unit will flicker to a black screen while I'm just moving my cursor around on my Logitech K400 bluetooth keyboard with trackpad.
For now, I Nandroid'ed back to the official 4.2.2 UGOOS Jellybean ROM backup.
Users (including myself) have had problems with being unable to activate wifi after flashing some ROMs, even when reverting to original stock firmware in some cases. I've found entering mask rom mode in batch tool 2.1 then re-flashing solved that issue for me.
Comment
-
Originally posted by rebrilov View PostPlease give a link to the Finless ROM Flash Tool v1.3.7
Comment
-
Originally posted by gopichandpai View PostI get maximum of 1750kbps bitrate on Netflix with this ROM. It is not even 720p.
The ROM is API level 19 so it meets the basic minimum requirements for Netflix HD capability. Many full blown HTPC users can't even get HD streaming on Netflix, to boot. Many factors other than ROM are in the mix when dealing with Netflix, including network provider, time of day, etc.
Comment
-
Originally posted by mystguy View Postanyone plz?
...try adb push /system/lib/hw the following file https://mega.co.nz/#!7ZYgHbwB!IvNuEn...W5FkEvdyzVufeg
Backup your original first.
Comment
-
Originally posted by Shomari View Post...try adb push /system/lib/hw the following file https://mega.co.nz/#!7ZYgHbwB!IvNuEn...W5FkEvdyzVufeg
Backup your original first.
Comment
What's Going On
Collapse
There are currently 8830 users online. 7 members and 8823 guests.
Most users ever online was 16,134 at 08:28 on 08-11-2023.
Comment