[ROM] QUICKSHOT V3.1 by The Nitro Team for Minix Neo X7

[Jack4speed3]

andotab.info

Greetings..
Just a noob question..
i have installed androtab.info v.6.0.3.1
how can i remove this cwm to install thi rom..cause i dont get recogniced as a device on my pc to flash this rom.
My regards

[kRel]

Hi

I have flashed this rom but by box not starting when i flashed v3 its work fine. i don't what i am doing wrong i have flashed twice but result is the same. Can you please help me ?

I did not understand what your problem is. You do not install the ROM?


You have made the transition from 3 to 3.1? Or did you install from scratch v3.1?


I installed from scratch (because I had the v.2) with the classic method RKDeviceManage and everything went well the first time (flickering apart )


If the ROM starts regularly and not part of the configuration of Google when the ROM was started simply start Playstore ...

[Kiralina]

well ..
essentially don't change anything If the procedure it don't work first time, is necessary to "convince" the ROM insisting in a second attempt

I don't know why, software works in mysterious ways , but for me it was just like this. The ROM needed some convincing.

[kRel]

Just keep both reset and power button pressed down during the whole flashing process and if the first time it fails ,disconnect, reconnect and do it the second time the same way with both buttons pressed. I went from KK to JB several times and this method never failed me. (and I run Win 7 in a virtual machine on a Mac)


Edit: OK. I see you already fixed it. I'm happy for you.

well ..
essentially don't change anything If the procedure it don't work first time, is necessary to "convince" the ROM insisting in a second attempt

[mcauseway]

agree ...
although xbmz is very reactive, some plug-ins (important fort me) do not work ...
Now I try to uninstall it, saving origina XBMZ apk and install xbmc 13.0

Seems to be that the plug-ins don't work (connect) at all for now, neither on QS or HWG rom, though it HAS worked on the latter (HWG), which makes it even more strange...

[dermuggi]

Is curious because in any version Nitro did not have this problem. Through the HDMI audio in my minix is perfectly synchronized and I have not changed any settings to have it so.


Try to install a previous version of XBMC without removing the new one that is not overwritten to my knowledge to personal experiences, and see how it goes...

many people got this issue :C
i was able to fix this problem.

pls go to this posting :

--->>> http://www.freaktab.com/showthread.p...l=1#post186046

hopefully it also fix your problem

[kokoui]

QS V3.1 is very good rom, colours and speed is beautiful. I needed to go back to JB because iStream is not working at all on xbmc gotham. After xunity team reales iStream for Gotham xbmc I will switch back to this rom.

istream works absolutely perfect for me on gotham and kit kat

[SL06]

Maybe first need to look at the specs of the DAC?

I am talking about HDMI digital passthrought. The internal DAC should not be involve...

[Kiralina]

Done everything Step by Step. Received ERROR: Download file failed
No when I press erase NAND on QS V2 rkandroidtool see only 2048 not 4096. So I think I just bricked my box...

Just keep both reset and power button pressed down during the whole flashing process and if the first time it fails ,disconnect, reconnect and do it the second time the same way with both buttons pressed. I went from KK to JB several times and this method never failed me. (and I run Win 7 in a virtual machine on a Mac)


Edit: OK. I see you already fixed it. I'm happy for you.

[rukmal12]

Hi

I have flashed this rom but by box not starting when i flashed v3 its work fine. i don't what i am doing wrong i have flashed twice but result is the same. Can you please help me ?

[Pilson]

I would also like to get 24/96 hi-res audio music as wheel as multichannel.

I am really bot an expert in android but according to what I have read, audio_policy.conf describe the hardware compatibility of the box. For now, it is set to
hdmi {
sampling_rates 44100|48000
channel_masks AUDIO_CHANNEL_OUT_5POINT1|AUDIO_CHANNEL_OUT_STEREO
formats AUDIO_FORMAT_PCM_16_BIT
devices AUDIO_DEVICE_OUT_AUX_DIGITAL
flags AUDIO_OUTPUT_FLAG_DIRECT

So adding 96000 in sampling_rates + PCM_24_BIT and crossing our finger might be a good start...

Can someone tell if I am in the wright direction? It seems simple to try but like I said, I am not an expert.

Maybe first need to look at the specs of the DAC?

[SL06]

Yeah, I know good USB DACs would be the best and reliable way to output
audiophile sound from audiophile content...

However, I'd be quite satisfied with a HDMI only solution to my A/V Marantz receiver which has good (if not very good) CS42528 DACs (and my Windows/Linux PCs can output very good HD sound to it).
I still don't know if 44/16 only over HDMI is a Minix X7/RK3188 HW or/and an Android SW limitation...

I would also like to get 24/96 hi-res audio music as wheel as multichannel.

I am really bot an expert in android but according to what I have read, audio_policy.conf describe the hardware compatibility of the box. For now, it is set to
hdmi {
sampling_rates 44100|48000
channel_masks AUDIO_CHANNEL_OUT_5POINT1|AUDIO_CHANNEL_OUT_STEREO
formats AUDIO_FORMAT_PCM_16_BIT
devices AUDIO_DEVICE_OUT_AUX_DIGITAL
flags AUDIO_OUTPUT_FLAG_DIRECT

So adding 96000 in sampling_rates + PCM_24_BIT and crossing our finger might be a good start...

Can someone tell if I am in the wright direction? It seems simple to try but like I said, I am not an expert.

[kodikas]

QS V3.1 is very good rom, colours and speed is beautiful. I needed to go back to JB because iStream is not working at all on xbmc gotham. After xunity team reales iStream for Gotham xbmc I will switch back to this rom.

[kRel]

Found one post on this forum with same problem. Followed all instruction and my Minix box is alive again Thank you for support. The link to post:
http://www.freaktab.com/showthread.p...l=1#post112509

I'm happy for you


I suggest - if you like - to describe step-by-step the recovery procedure that you personally made, (I read the link you provided). Can be of help to others users...
Perhaps it is also the case of put it on the first page

[kodikas]

I'm sorry...

The instructions are the ones who gave me daemonium on my specific request and which are shown in the first pages of the discussion, here

The same instructions I have given to a user in another forum and he managed to go back to QSv.2 here... this user shortly after thanked me for to the successful completion of the procedure ... here

Repeat the procedure, or waiting for help from the developers ...

One question: you pointing to full path\update.img to the rom QSv.2 in the rkandroidtool box above ??
Are you certain that the image of QSv.2 is not corrupt? Did you check the hash of your QSv.2 with the original one?

Found one post on this forum with same problem. Followed all instruction and my Minix box is alive again Thank you for support. The link to post:

http://www.freaktab.com/showthread.php?8106-help-needed-to-restore-minix-neo-x7-into-working-state-SOLVED&p=112509&viewfull=1#post112509