TV110 Android Tv Box

[daemonium]

Thanks daemonium! You are the man :-)
Did you do any changes other than rooting?

yes, i deleted xbmc to make the upload faster :P
And i did the buffers mod too.

[dracosc22679]

yes, i deleted xbmc to make the upload faster :P
And i did the buffers mod too.

Thanks!

[bobones]

AMLinux/OpenELEC test for TV110:
http://xbmc.ru/forum/showthread.php?t=4587

There are bugs:
In dmesg constantly falls - aml_dvfs_do_voltage_change, no dvfs driver
The screen resolution is only 1280x720
Maybe something else.

Anyone else tried this?

I flashed it to my X4 box and it works really well. XBMC is super fast compared to the Android version. The only problem I've got is that mini-display preview in LiveTV is not centred, but that's still not fixed in Kodi for Android either. It uses 14.0-beta3, and wifi, h/w decode, passthru, etc. are all working fine and the GUI is lightening quick. I haven't tried 1080p, but my tv is 720 so I don't care if it doesn't work. I need to do a bit more testing, but it seems great so far.

By the way, I used Daemonium's TWRP for the TV110 to flash the ROM

[csgabe]

Yes, I've tried it (Openelec). It works good, but I didn't like 720p resolution, it would be ok if only menu would be 720p & it would do automatic resolution & framerate change based on video source.

[bobones]

Yes, I've tried it (Openelec). It works good, but I didn't like 720p resolution, it would be ok if only menu would be 720p & it would do automatic resolution & framerate change based on video source.

Can you tell me how you flashed another firmware after OpenELEC? My box doesn't appear to have a reset button and there's no obvious way to get into recovery to flash something else. Do I need to create a bootable SD?

[csgabe]

Yes, I created a bootable sd card, but you could try to login into the openelec box via ssh, then issue "reboot recovery" command.

[bobones]

Yes, I created a bootable sd card, but you could try to login into the openelec box via ssh, then issue "reboot recovery" command.

Thanks for that, I tried reboot recovery and I get back to the android recovery. However, I think I'll stick with this OpenELEC build for a while as most things are working well including 1080p. The one thing that is annoying me is HDMI-CEC as the box turns off but not on: I'd rather just disable CEC for the box entirely.

[csgabe]

1080p Openelec

You can change 720p framebuffer to 1080p in Openelec via a script that's run on startup:
Login through ssh, run the following command:

 nano /storage/.config/autostart.sh

Copy the code below:

echo 1080p > /sys/class/display/mode
echo 1 > /sys/class/graphics/fb0/freescale_mode
echo 0 0 1919 1079 > /sys/class/graphics/fb0/free_scale_axis
echo 0 0 1919 1079 > /sys/class/video/axis
echo 0 0 1919 1079 > /sys/class/graphics/fb0/window_axis
echo 0 > /sys/class/graphics/fb0/blank
echo 1 > /sys/class/graphics/fb1/blank

[iamftr]

I have instaled the version of openelec listed on this page to my tv-110 but can not conect to the internet making my box.... well useless as i can no longer boot to recovery to restore android ether

the box sees both the wired and wireless connections but wont conect to ether

any help on getting the wired or wireless to work or re flash android would be greatly apreciated

Thanks

[iamftr]

hi guys, i was trying to port twrp to tv110 and it was being a little hard. so, i asked my team mate Abdul_pt for a little help. Now i have a working version of twrp for tv110 and also for s85 and MXQ. I figured out how to load it from sdcard, so yes, no need to flash.
Now i need a/some brave man/men to test this. I already flashed it on my tv110 , it looks like it's working backup, restore etc, but didn't test further.
Anyone?

Hi

Could i get a copy of your twrp for the tv-110 to ether flash or boot from sd to help rescue my box please

Thanks

Ps i am using your modified rom on my other 110 its working great

[bobones]

See sticky in this forum

[iamftr]

See sticky in this forum

Thanks for that

i was looking in the general AMLogic forum

found it now

[iamftr]

Well i managed to get it all sorted but now i am having issues getting xbmc/kodi to work

it boots up fine and then just closes

Any ideas?

I am using daemonium's rom

i cant get any of the others to flash so cant try them

[csgabe]

Try SPMC:

http://spmc.semperpax.com/

[smoothfreeze]

dropping by to say thanks to stane and daemonium! i first bought this box and google play wasn't working etc. flashed daemonium fw and it worked magically after. thanks guys for the hard work!