TV110 Android Tv Box

[csgabe]

Don't you have original firmware? I'll upload soon a TV110 firmware.
Here is the firmware for TV110:

https://mega.nz/#!tU9ERKhY!8Bm1cDS8Uep0xIrjsJw1nRI0GqDL-jTdLu5TH0zfmWw

You need to unpack the archive and select aml_upgrade_package.img from File->Import image in Usb Burning tool, erase flash(normal erase) should be checked & erase bootloader should be checked too, then press start & wait.

[pavlosh]

perfectly worked. Now i found my way out, is there any openElec available for this device to run Kodi?
Thank you again for your advises. You really un-bricked my device

[csgabe]

Yes. I've PM-ed you a download link for OpenElec 5.0.3.

[pavlosh]

i downloaded the link you gave me, put the zip on sd card, went on android update and selected the file and then i clicked update.
the box restarted and i got the attached error screen

[csgabe]

It's OK, that's the standard recovery menu, the update wasn't flashed yet(the update app only rebooted the box in recovery mode so you can flash update). You need to select apply update from EXT, then select the update from sd card.

[red1928]

Anyone using openelec beta 6 on the tv110 box?

[red1928]

Tv110 box got stuck on openelec and tried flashing android with bootable sd. It flashed to android but it when I booted box back up it gets stuck on the logo and goes no further. Any suggestions, some say there is a reset button for it but I cant find one.

[teefer22]

You'll have to download from xbmc.ru the tar update version of OpenELEC, then download xdelta.zip(only once), deltaversionnumber.zip(everytime)
unzip xdelta.zip,deltaversionnumber.zip into one directory, copy update file too, open command line & run:

applypatch.bat updatefile.tar

https://truck.it/p/bu3YULKM_2

updatefile.tar will be ofcourse the downloaded OpenELEC file name.
openelec_patched.tar will be created.
You can try it now with OpenELEC-Amlogic.TV110.arm-5.0.6.

I'm hoping csgabe is still around and might see this. I've been using your modified openelec version 5.0.3 ever since you modified it (you mentioned something about different voltages in the dtd or dte). Everything is still good, but I'd like to update to 5.0.8 as this sounds to be the most stable version (running 14.2) from what I have read and there are a couple minor bugs i'm hoping that got fixed from 5.0.3 to 5.0.8.

Could I bother you to make a "deltaversionnumber.zip" for 5.0.8 if it's not too much trouble?

Thanks in adavance.

[csgabe]

Here you go:
https://mega.nz/#!tB8AURRZ!xEqKcB_c2...-ad5x9iy8jGb3I

If you need xdelta:
https://mega.nz/#!tVtEHQKB!813aahA-0...tPgVDsH-VHKFPQ

[teefer22]

Huge thanks csgabe, I'll give it a shot and report back just in case it helps anyone else out there.

[teefer22]

Here you go:
https://mega.nz/#!tB8AURRZ!xEqKcB_c2...-ad5x9iy8jGb3I

If you need xdelta:
https://mega.nz/#!tVtEHQKB!813aahA-0...tPgVDsH-VHKFPQ

Huge thanks csgabe, I'll give it a shot and report back just in case it helps anyone else out there.

Just to update on how it went. I created an updated 5.0.8 tar file using the files csgabe provided above and I placed the updated .tar file into /storage/.update and then rebooted the box normally. The box automatically updated itself and rebooted itself twice and then it was updated. I did not lose any libraries, addons, or settings. I have been running 5.0.8 all weekend and it was rock solid. I haven't had to reboot the box once.

I still have the issue in 5.0.8 that when rebooting the box with the TV on, I have no sound until I switch to another input (OTA TV or HDMI2) and then back to the TV110 input (HDMI1). (Powering off the TV and then back on also gets sound back) I haven't had a chance to hook this tv110 up to a different TV to see if maybe the TV is at fault or not, but I'll try that this week some time. Note that I had this "no sound until the tv is powered off/on" issue in 5.0.3 also.

Note: I have a TV110 branded box purchased from Gearbest quite some time ago.

Thank again csgabe for the files to make this update work!

[smoothfreeze]

hey guys, can anyone give me instructions on how to update to the latest stable openelec on this device? i have it running sometime back and its all slow and sluggish now. haven't turned it on since forever. i'm guessing flashing a new update release would help? any help/guide would be appreciated!

[Seryi3]

Original Stock Firmware Collection for MXPro:

https://yadi.sk/d/TwyrYK7rpHgQj

Wi-Fi modules support: AP6210 (ECT TV110/ MXPro oldboard) & AP6212 (new MXPro).

[red1928]

Where can I get tar version for openelec 6, my box has freezing issue so need to use patched version