CX-919 Help

[OnlineTuba]

looks exactly like my device. try this http://pan.baidu.com/s/1sjykrwh firmware.
my also has problem with video and youtube decoding playback but this is hardware, not software problem.

Ill give it a go, thanks

[blinkone]

That is rom I am currently using but bluetooth and Wifi are not working and I can seem to mount the nand flash. how can I flash back to Jellybean?

One last attempt
Hear is the correct kernel I have found for your device wifi chip RTL8723BS^ download & unzip the kernel.to a safe place on your pc where you no where it is,.
Open Flash Tool v1.37 untick everything except kernal, on the kernal line to the far right is a little box click in that box & locate the kernal you downloaded select the kernal you require
Put your stick into flash mode the easyest way is to use the reboot app https://play.google.com/store/apps/d...s.reboot&hl=en & select reboot to bootloader (flash mode)
At the bottom of flash tool it should say "found RKAndroid Loader Rock usb" or something similar ,
So now all thats left to do is click flash rom it will only take 3 or 4 seconds & your stick will reboot with your new kernel & you wont loose anything on your device your device we stay the same apart from having a new kernel,,, hopefully you will now have working wifi & Bluetooth.

[OnlineTuba]

One last attempt
Hear is the correct kernel I have found for your device wifi chip RTL8723BS^ download & unzip the kernel.to a safe place on your pc where you no where it is,.
Open Flash Tool v1.37 untick everything except kernal, on the kernal line to the far right is a little box click in that box & locate the kernal you downloaded select the kernal you require
Put your stick into flash mode the easyest way is to use the reboot app https://play.google.com/store/apps/d...s.reboot&hl=en & select reboot to bootloader (flash mode)
At the bottom of flash tool it should say "found RKAndroid Loader Rock usb" or something similar ,
So now all thats left to do is click flash rom it will only take 3 or 4 seconds & your stick will reboot with your new kernel & you wont loose anything on your device your device we stay the same apart from having a new kernel,,, hopefully you will now have working wifi & Bluetooth.

Thanks for your help still no luck no wifi or bluetooth.

[blinkone]

Thanks for your help still no luck no wifi or bluetooth.

Reboot the device it should work after a reboot

[OnlineTuba]

looks exactly like my device. try this http://pan.baidu.com/s/1sjykrwh firmware.
my also has problem with video and youtube decoding playback but this is hardware, not software problem.

This Rom worked thank you for the link, do you know if there is a root available for it?

Also thanks to blinkone for your help also.

[alephis]

This Rom worked thank you for the link, do you know if there is a root available for it?

Also thanks to blinkone for your help also.

Sorry, I have no information or practice to root this device. I'm going to return my device to seller (it has serious hardware problem/defect).

I think rooting should not be any different from rooting other similar devices.

[OEMBSOD]

cant see anypins on samsung chip...

hypermind earned device after closing 7-8 pin? I first have flashed linux, and then decided to return the android and received in the logs

14:22:03 491 <Layer 1-1-2> Test Device Start
14:22:03 491 <Layer 1-1-2> Test Device Success
14:22:03 501 <Layer 1-1-2> Lowerformat Device Start
14:22:31 517 <Layer 1-1-2> Lowerformat Device Success
14:22:31 521 <Layer 1-1-2> Test Device Start
14:22:31 527 <Layer 1-1-2> Test Device Success
14:22:31 532 <Layer 1-1-2> Check Chip Start
14:22:31 538 <Layer 1-1-2> Check Chip Success
14:22:31 572 <Layer 1-1-2> Get FlashInfo Start
14:22:31 577 <LAYER 1-1-2> INFO:FlashInfo: 0 0 0 1 0 10 10 28 2C 2 3
14:22:31 582 <Layer 1-1-2> Get FlashInfo Success
14:22:31 589 <Layer 1-1-2> Prepare IDB Start
14:22:31 593 <LAYER 1-1-2> INFO:CS(1) (8192MB) (HYNIX)
14:22:31 597 <LAYER 1-1-2> INFO:CS(2) (8192MB) (HYNIX)
14:22:31 613 <Layer 1-1-2> Prepare IDB Success
14:22:31 619 <Layer 1-1-2> Download IDB Start
14:23:01 246 <Layer 1-1-2> Download IDB Success
14:23:01 246 <Layer 1-1-2> Reset Device Start
14:23:02 258 <Layer 1-1-2> Reset Device Success
14:23:02 265 <Layer 1-1-2> Wait For Loader Start
14:23:33 000 <Layer 1-1-2> Wait For Loader Fail
14:23:33 000 **********Restore Done Success<0> Fail<1> Time<89497>ms**********

UPD.This method works. thank you

[Zoprano]

HELP...

Good afternoon.


I hope not call abuse ask you for help in this way.


I have a CX-919, and I can not in any way make stay in flash mode, and is detected by the PC.


Someone help me?


Already installed W7 on a new PC, and even then I did.


When I turn, appears unknown device, and will not let me update the drivers.


I've tried everything I read here, have tested the program to install the drivers, and nothing works.

[Sillium]

TV Stick: GXT_D16_LP_V1.8 150310

hello

NEEED HELP

Does anyone have a rom for this stick?
have quite a few roms but tried Unfortunately, this does not wifi.

this rom works but no wifi : http://freaktab.com/forum/tv-player-...699#post349699

I've tried this kenel but the wifi does not work : http://freaktab.com/forum/tv-player-...237#post387237

description from ****:

Smart TV Box Stick Android 4.4 Quad Core 2G/8G XBMC DLNA WiFi US MK809IV Mini PC

CPU	Rk3188T Quad Core 1.6 (Cortex-A9)
GPU	Quad Core Mali 400
Ram	DDR3 2GB
Rom	On board NAND Flash 8G
Expand Micro SD	T-Flash(Maximum support 32GB)
Video Format	MPEG-1/MPEG-2/MPEG-4/H.263/H.264/AVS/VC-1/RV8/RV9/RV10/VP6/VP8/Sorenson Spark/MVC 1080P@60fps(1920x1080)
Audio Format	Support: MP3/WMA/APE/FLAC/AAC/OGG/AC3/WAV
Picture Format	Support: Max.8000x8000 JPEG BMP GIF PNG
WIFI	support 802.11a/ b/g/n
Bluetooth	Support Bluetooth 4.0
Output	HDMIPort
Ports	1*Micro USB,Support OTG/HOST ( USB port RJ45)
1*standard USB
1*TF card slot
1*Micro USB for power
1*Physical botton(For upgrading software)
OS	Google Android 4.4
Dimension	105mm*40mm*10mm
DC	5V 2A
Weight	<40g
Working environment	5‹C--35‹CC30%--90% Humidity
Storage environment	-20‹C--60‹CC10%--90% Humidity

thanks very much
Excuse me for my bad english

best regards

[blinkone]

Sillium
Can you please upload bigger photos we cant see there too small.
Thanks

[Sillium]

Sillium
Can you please upload bigger photos we cant see there too small.
Thanks

i have upload bigger photos.
thx

[liha0400]

Sillium,
try the one from this post: http://freaktab.com/forum/tv-player-...408#post403408
I have the same board. The rom works, with WIFI & Bluetooth. Unfortunately, it is 720p only.

[Sillium]

Sillium,
try the one from this post: http://freaktab.com/forum/tv-player-...408#post403408
I have the same board. The rom works, with WIFI & Bluetooth. Unfortunately, it is 720p only.

I have try this, but it don't works. I have only four linux pinguins on startup and thats it.
after any reboot its crashing.

do you have the board GTX_D16_LP_V1.6 ? your board have chips from samsung?
my board is GTX_D16_LP_V1.8, my board have other chips. my board have chips from SKhynix. i think thats the problem? i have any idea why its don't work.

I have some of Rome tried but all that has wifi does not work

thanks for your information.
best regards

[liha0400]

Hi Silium,
actually my stick has the same board: gxt_d16_lp_v1.8, 150310, gxt15050404-2. I dont think it has any chips of samsung. Wierd that it did not boot on your stick. But the variety of sticks etc. is really crazy.

[Sillium]

here you can download the original version from the TV Stick: GXT_D16_LP_V1.8 150310

http://freaktab.com/forum/tv-player-support/rk3188-devices/mk-models-mk802iv-mk809iii-etc/510777-mkv809iv?p=513971#post513971