HPH RK3288 ROM v1.2 by mo123 (20141117)

[trycatch]

Hi mo123,

i use your 1.2 rom in my device and its just great but
i also have a plan to run this device in CAR.

in old version or stok version, device was running with 2.1A power (from car)

but 1.2 version device is not booting in car
its ok with 3A power outlet at home.

i plan to get 3A power adapter for car, but it is posible to make a version non overclocked ?


thanks any way...

[no_spam_for_me]

...So it is the black arrow you should count to 7-8 pin (only fpr ENY EBK328 clone device)

BTW: not becuase of ENY EBK328 but because of the FORESEE nand/emmc chip and the little tiny white dot at the chip which indicates pin 1 ...

[DuHaudegenDu]

In the lowest picture, begin counting pins 7&8 from lower left corner: those 2 are the ones you are looking for.

THX, it worked after some pm's with oldhouse.

So it is the black arrow you should count to 7-8 pin (only fpr ENY EBK328 clone device):

-connect only usb
-start Rockchip Batch Tool v1.7 as admin
-PIN the 7 & 8 connectors
-Then when you did this, connect the power cable
-Rockchip Batch Tool v1.7 should show you instead of an green device label a blue device label
-If is is blue you can simply flash yur stock rom again


To mo123:
We know that this device is not best (you show us here) but did you think you can told us how we can run your rom on our device? What did we wrong?
Stock rom is this here. (source: ENY2005) Or this older one.

Greetings by DuHaudegenDu

[oldhouse]

GREAT! But the question is: How to boot into maskrom mode with an eny ebk328 clone/oem?
This is my pcb.
And I think that this is my nand:


Greetings by DuHaudegenDu

In the lowest picture, begin counting pins 7&8 from lower left corner: those 2 are the ones you are looking for.

[DuHaudegenDu]

Same happened to me.
You have to open your device case, and boot it into maskrom mode to be able to flash it again.
Unluckily if no cooker have our device I doubt we will ever be able to flash any of these custom roms.

GREAT! But the question is: How to boot into maskrom mode with an eny ebk328 clone/oem?
This is my pcb.
And I think that this is my nand:


Greetings by DuHaudegenDu

[oldhouse]

Oh oh... Seems that something went wrong on my ENYBOX EKB328 clone :-(
Like oldhouse has one...
This is my parameter from stock:

FIRMWARE_VER:4.4.2
MACHINE_MODEL:rk30sdk
MACHINE_ID:007
MANUFACTURER:RK30SDK
MAGIC: 0x5041524B
ATAG: 0x60000800
MACHINE: 3066
CHECK_MASK: 0x80
PWR_HLD: 0,0,A,0,1
#KERNEL_IMG: 0x62008000
#FDT_NAME: rk-kernel.dtb
#RECOVER_KEY: 1,1,0,20,0
CMDLINE:console=ttyFIQ0 androidboot.hardware=rk30board androidboot.console=ttyFIQ0 board.ap_has_alsa=0 init=/init initrd=0x62000000,0x00800000 mtdparts=rk29xxnand:0x00002000@0x00002000(uboot),0x00002000@0x00004000(misc),0x00008000@0x00006000(resource),0x00008000@0x0000e000(kernel),0x00010000@0x00016000(boot),0x00010000@0x00026000(recovery),0x0001a000@0x00036000(backup),0x00040000@0x00050000(cache),0x00002000@0x00090000(kpanic),0x00180000@0x00092000(system),0x00002000@0x00212000(metadata),0x00400000@0x00214000(userdata),0x00020000@0x00614000(radical_update),-@0x00634000(user)

I load your HPH RK3288 v1.2 2014/11/17 plus the 2GB Parameter file for 8GB Box
Then I try to flash it. Like you decribet here:

http://www.freaktab.com/showthread.php?18706-HPH-RK3288-ROM-v1-2-by-mo123-(20141117)&p=252943&viewfull=1#post252943

After 30minutes nothing happens, just "Testing device" was at status field.
So I log off and log in.
Every flasher now stop at: "Testing device"
Also the RKBatchTool.exe when I try to flash the stock-rom. :-(

WHAT CAN I DO?
WHAT WENT WRONG!

Greetings by DuHaudegenDu

Same happened to me.
You have to open your device case, and boot it into maskrom mode to be able to flash it again.
Unluckily if no cooker have our device I doubt we will ever be able to flash any of these custom roms.

[DuHaudegenDu]

You have to download the stock ROM of your device.
Then download my ROM with flash tool.
Then use the 2nd or last tab of the flash tool to 'unpack' the update.img(stock ROM).
Then copy the unpacked boot,resource & kernel into my ROM's rockdev/Image folder, replacing the 3 image files already there.
Then flash normally by 'lowerformat' and 'run' on the first tab of the flash tool.

Oh oh... Seems that something went wrong on my ENYBOX EKB328 clone :-(
Like oldhouse has one...
This is my parameter from stock:

FIRMWARE_VER:4.4.2
MACHINE_MODEL:rk30sdk
MACHINE_ID:007
MANUFACTURER:RK30SDK
MAGIC: 0x5041524B
ATAG: 0x60000800
MACHINE: 3066
CHECK_MASK: 0x80
PWR_HLD: 0,0,A,0,1
#KERNEL_IMG: 0x62008000
#FDT_NAME: rk-kernel.dtb
#RECOVER_KEY: 1,1,0,20,0
CMDLINE:console=ttyFIQ0 androidboot.hardware=rk30board androidboot.console=ttyFIQ0 board.ap_has_alsa=0 init=/init initrd=0x62000000,0x00800000 mtdparts=rk29xxnand:0x00002000@0x00002000(uboot),0x00002000@0x00004000(misc),0x00008000@0x00006000(resource),0x00008000@0x0000e000(kernel),0x00010000@0x00016000(boot),0x00010000@0x00026000(recovery),0x0001a000@0x00036000(backup),0x00040000@0x00050000(cache),0x00002000@0x00090000(kpanic),0x00180000@0x00092000(system),0x00002000@0x00212000(metadata),0x00400000@0x00214000(userdata),0x00020000@0x00614000(radical_update),-@0x00634000(user)

I load your HPH RK3288 v1.2 2014/11/17 plus the 2GB Parameter file for 8GB Box
Then I try to flash it. Like you decribet here:

http://www.freaktab.com/showthread.php?18706-HPH-RK3288-ROM-v1-2-by-mo123-(20141117)&p=252943&viewfull=1#post252943

After 30minutes nothing happens, just "Testing device" was at status field.
So I log off and log in.
Every flasher now stop at: "Testing device"
Also the RKBatchTool.exe when I try to flash the stock-rom. :-(

WHAT CAN I DO?
WHAT WENT WRONG!

Here the log:

10:21:14 627 AndroidTool v2.3.0.0 start run
10:27:51 792 Layer<2-1-7>:Test Device Start
10:27:51 792 Layer<2-1-7>:Test Device Success
10:27:51 807 Layer<2-1-7>:Check Chip Start
10:27:51 807 Layer<2-1-7>: Check Chip Success
10:27:51 807 Layer<2-1-7>:Get FlashInfo Start
10:27:51 807 <LAYER 2-1-7> INFO:FlashInfo: 00 08 E7 00 00 04 04 00 28 00 01
10:27:51 823 Layer<2-1-7>:Get FlashInfo Success
10:27:51 823 Layer<2-1-7>:Prepare IDB Start
10:27:51 823 <LAYER 2-1-7> INFO:CS(1) (7393MB) (SAMSUNG)
10:27:51 839 Layer<2-1-7>:Prepare IDB Success
10:27:51 839 Layer<2-1-7>ownload IDB Start
10:27:52 681 Layer<2-1-7>ownload IDB Success
10:27:52 697 Layer<2-1-7>:Reset Device Start
10:27:53 697 Layer<2-1-7>:Reset Device Success
10:27:53 697 Layer<2-1-7>:Wait For Loader Start
10:27:54 930 Layer<2-1-7>:Wait For Loader Success
10:27:54 930 Layer<2-1-7>:Test Device Start
10:35:18 800 Error:RKU_Open-->CreateFile failed,err=2,path=\\?\USB#VID_2207&PID_320A#6&1A81 23C&0&7#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
10:35:18 800 <LAYER 2-1-7> ERROR:TestDevice-->RKU_TestDeviceReady failed,RetCode(-1),path=\\?\USB#VID_2207&PID_320A#6&1A8123C&0&7#{a 5dcbf10-6530-11d2-901f-00c04fb951ed}
10:35:19 807 Error:RKU_Open-->CreateFile failed,err=2,path=\\?\USB#VID_2207&PID_320A#6&1A81 23C&0&7#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
10:35:19 807 <LAYER 2-1-7> ERROR:TestDevice-->RKU_TestDeviceReady failed,RetCode(-1),path=\\?\USB#VID_2207&PID_320A#6&1A8123C&0&7#{a 5dcbf10-6530-11d2-901f-00c04fb951ed}
10:35:20 821 Error:RKU_Open-->CreateFile failed,err=2,path=\\?\USB#VID_2207&PID_320A#6&1A81 23C&0&7#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
10:35:20 821 <LAYER 2-1-7> ERROR:TestDevice-->RKU_TestDeviceReady failed,RetCode(-1),path=\\?\USB#VID_2207&PID_320A#6&1A8123C&0&7#{a 5dcbf10-6530-11d2-901f-00c04fb951ed}
10:35:21 835 Error:Layer<2-1-7>:Test Device Fail
10:35:21 835 Layer<2-1-7>: RunProc is ending, ret=0

Greetings by DuHaudegenDu

[mo123]

Hi mo123,to update the SU binary doesn`t work`in your ROM v.1.2. Is it realy important to do this or not ? I love tis Rom .It's great. And the second qustion : Is it possible to update this rom in a higher Version, without new flashing the box in the future( v 1.3).

For v1.3 you have to flash everything.
For v1.4 eg. the partitions will be the same size and you can just upgrade what you want.
Also tried to make simple zip updates, but TWRP recovery is not working properly on RK3288 devices, otherwise it would have been very easy.

You can use Titanium backup to easily backup your apps/data and restore to a new ROM.
Will try to include latest su binary in new ROM. The only reason it's necessary is to give root, doesn't matter if it's an old version.

[Wolle]

Update SU binary doesn`t work

Hi mo123,to update the SU binary doesn`t work`in your ROM v.1.2. Is it realy important to do this or not ? I love tis Rom .It's great. And the second qustion : Is it possible to update this rom in a higher Version, without new flashing the box in the future( v 1.3).

HPH RK3288 2014/11/17 ROM v1.2 by mo123

Changelog v1.2
Based on 2014/11/12 v1.3.35 ROM

- Update new librk_on2
[B]- Blu-ray : support 3d ui
[B]- Surface: fixed the bug that screen piture is black color when screen capture[/B]
- U-boot: bootloader(v2.17.02) updated
- NAND DRIVER: Fix reboot in nand driver issue
 - Rga/rga2 driver error handling fixed
- Updated loader
- Update uboot from rk_develop_box
[B]- Fix some 4k h.265 crash[/B]
[B]- Update ffmpeg[/B]
- RK: ion: add event tracer
 - RK3288 hdmi: modify 74.25MHz pll config.
 - Mmc: workaround  DDR mmc devices internal divider bug
[B]- Disk: to support the ext4 file system[/B] u-disklog:remove the invalid printk
- DDR : do not set the frequency when ddr initialization
 - USB: fix handle NAK for IN/OUT SSPLIT/CSPLIT transfers
- HDMI&FB : Temporary do not automatically switch fb  when HDMI plugging
[B]- wifi->ap6335 - Update the firmware, strengthen the new module compatibility[/B]
- Ethernet:gmac: fix the bug of connection failure with PHY because of wrong phy_addr               
- Fix app install-external error when app2sd is not supported
- Pppoe:fix the bug of no upstream for hotspot when pppoe is connected
[B]- Update Camera driver[/B]
[B]- Update videoplayer.apk for some problem[/B]

Overclocked CPU to 1.8Ghz
4GB Userdata for Apps by default
Latest Google Apps
Removed 15 Bloatware apps

SPMC v13.3.4(Perfect video playback)
[/B]- Can seek forward/backwards without any crashes
- Videos play more smoothly
- Most video formats play correctly, in Kodi Beta 1/2 some avc/mkv files only show black screen, they play correctly
- Passthrough support(some receivers might still have hissing sound, only way to fix that is using unstable Kodi beta 1 PT or wait for final Kodi Helix)
- Fixed playback issues as in previous ROM version

Solo Launcher(Replaces Nova Launcher)
- App Drawer Groups
- App Drawer Folders
- Nice and fast
- Developer will add more columns in homescreen in next version for TV Boxes.

Exposed Modules
- Youtube Adaway
- Fake Wifi(Enable to run apps/games that require a wifi connection to run)
- Transparent status bar
- Fake ID + 3 other security fixes

Rootcloak - Hide root from apps
HDMI Virtual Switch - Hide HDMI status from streaming apps
AdfreeTime - For DNS server, Sign-up here
DNS Forwarder - To enable DNS server on KitKat for AdfreeTime

Wifi tweaks as in previous version of ROM

Passthrough support with SPMC or Kodi Beta 1 PT app
------------------------------------------------------------------------------------
Changelog v1.0
Based on 20141021, v1.3.9 ROM

- [B]Long pressing the menu button can show/hide the status bar.
- Delay 1 second for Shutter effective time, solved the problem of green screen
- Solved the problem of YOUTUBE video quality unable to display 1080P setting.
- Added service flash_recovery2 /system/etc/install-recovery-2.sh, in   order to be compatible with the YYF script, focus on YYF APK issue of   chinese version, download and install is ok directly after root.
- Modify the remote control response, and the hidden the button of edit   picture, please open the picture compiled from menu actionbar
- IR remote control indicator using the LED trigger control, modify timer delay
- Press the key of common use for a few seconds to switch the mode of mouse
- Added airplay
- Solved the bug of SOC Camera that could not open, the reason is that the CameraHal and Driver versions does not match.
- Solved part of the YUV Camera preview screen flash problem.
- Updated Blueray support for RKVideoplayer.
- Updated RKVideoplayer and fix some error.
- Update the hdmi output format in 4k@60hz
- Fix edid 3d format parse error
- Updated ffmpeg codecs[/B]

Extra Mods

- XBMC is replaced by SPMC 13.3.3(ROM v1.2 replaced this)
Enable Mediacodec and disable Libstagefright in SPMC Settings for best playback.
Green artifact bug on some videos is fixed.
4K videos now play full speed again without dropped frames.

- YouTube
Can play 1080p quality now
YouTube ad-blocker included, install exposed module, activate YouTube module and reboot your device. Might not always work immediately when YouTube gets updated.

- Launcher
- Can choose between default & Nova Launcher(ROM v1.2 replaced this)

- ROM is rooted(Thanks to Bob's method)
- Device spoofed as Samsung Galaxy for improved compatibility(Removed in v1.2)
- Fixed problem with certain cable apps not working, yesGO, Comcast & Xfinity, drm satellite cable apps that have issues with DRM (solution found by bluesmanuk)
- Improved wifi performance and buffering
- Included Netflix, Hulu, Youtube, SPMC, TuneIn Radio, Terminal app, ES File Manager, Dolphin Browser, BBC IPlayer, MXPlayer & Ad-Away. Reboot by Petrus
- Most apps updated to latest version, maybe 1 or 2 Google apps still update after boot.
- Extra remote files for Mele F10 & other Airmouse etc.

To access 'Developer Options', Click 5 times on 'About Device' in Android Settings.

(Drawer Tabs)


Homescreen - Yours will look different with other wallpaper & theme
(This theme is included if you want to enable it, another theme, Android L is also good)


New Bootanimation

--------------------------------------------------------------------------------------------

Download link:
Old: HPH RK3288 v1.0 2014/10/26 Here or Here
New: HPH RK3288 v1.2 2014/11/17 Here or Here
Update: 2GB Parameter file for 8GB Box Here & 8GB Parameter file for 16/32GB Boxes Here


Instructions
Connect OTG cable to box and PC.
Hold paperclip/toothpick into reset hole while connecting the power to box.
It should now connect. If not reinstall the drivers and try again.

1. Unzip with 7z
2. Use the first tab of AndroidTool v2.3 to select the Images to flash from the ROM.
(Already set-up by default)
Default is 4GB Userdata, but can be replaced with updated above parameter files.
3. Click 'LowerFormat'
4. Click 'Run' to flash the ROM
5. Wait 5 minutes
6. Unplug device from PC.
7. Connect to display.

Don't mix with other ROMS since this ROM has different system.img and latest bootloader in boot.img. Can use resource.img and boot.img from another ROM if it was released in November but not needed in most cases.
PS: Only use default parameter file - rk3288-3.10-uboot.parameter, it is 4GB. Other parameter files will brick your device. See above for updated 2GB & 8GB parameter files.



Solo Launcher
(How to setup App Drawer Groups and Desktop Layout)
1. Copy the backup directory to /SDCard/SoloLauncher
2. Go to Solo Launcher Settings - Click Restore Solo Settings & Desktop Backup
Restore the backups shown

Other
1. Download latest AdAway lists
2. Download Xposed framework and enable modules.
3. Update SU binary

HPH/Ugoos IR Remote
- Long Press Menu button to Hide Status Bar
- Long Press Recent App button to turn direction keys into mouse mode
- Long Press Power button to turn off, Short press for standby.

Any suggestions, improvements or bugs, please share, so I can fix it or report it.
There is a limitation to only have 800MB for system.img on Windows.
Also no CWM for RK3288 exists, otherwise it would have been easier to include more apps.

For AC3/DTS PT in Stock Video Player
1. Copy libffmpeg.so, librkffplayer.so & patchedlibmedia.so to system/lib
2. Restart device
3. Works in Stock Video Player and Kodi Beta 1 PT patched

http://www.mediafire.com/download/4ldkafb2fx3o7gk/PT.7z

http://www.mediafire.com/download/p3vd9ydtf2we176/patchedlibmedia.so

Automatic framerate in HPH SPMC
Please test improved SPMC Auto_Frame_Rate_Switcher on your HPH devices.

https://github.com/Mafarricos/Mafarricos-modded-xbmc-addons/blob/master/repo/script.video.fswitchRK/script.video.fswitchRK-1.3.6b.zip

Unzip and install as addon from zip.
Go to Program addons to define the shortcut keys and enable the service. Restart SPMC afterwards.
Press your short-cut keys to change to 24/50/60hz or automatic.

[oldhouse]

Try any another tool for unpacking/packing.
"RKXXX firmware tools by SergioPoverony" for example

Thanks for the suggestion. I managed to extract without errors using mentioned tool.

[sam_ugoos]

Totally agree with you, with this player it's a mess.
How could I extract files from this firmware if androidtool gives error unpacking? Are there alternative solutions?

Try any another tool for unpacking/packing.
"RKXXX firmware tools by SergioPoverony" for example

[oldhouse]

Enough free disc-space?

Yes, absolutely, on both PCs I tested I get same error unpacking...

[no_spam_for_me]

Enough free disc-space?

[oldhouse]

I have no problem to unpack the 'update(1).img' with RKAndroidToolv2.3 at [Advanced Function] ...

I get this, tested on 2 different pc. I don't have problems with other roms so honestly I really don't understand what could be wrong...

[no_spam_for_me]

I have used RKtool to flash my linked rom and everything works fine, but I was wondering how I could extract files from it to create a custom rom using mo123 files (chinese link gives some problems, I had to retry download 10 times before completing 100%): Android tool gives error when unpacking it

I have no problem to unpack the 'update(1).img' with RKAndroidToolv2.3 at [Advanced Function] ...