Unbrick or fix NAND on the MK808

[Alucard146]

TF-BOOT Pins



For SDTNQGAMA-008G 5&6 pin on right side of chip are TF-BOOT Pins. I have it in my Nextbook NEXT7D12R with Amlogic AML 8726-mx.

[ATTACH=CONFIG]3068[/ATTACH]

This is pretty old but i want to say thank you ive been fighting with my mk3128 unbranded box and finally came across your pic to jump 5 and 6 and i was finally in flash mode red light pc found it etc. Thats the 2nd unbrick ive had to do i think i need to upgrade to a newer box lol thanks

[danestaubyn]

Hi ,

new here, my mk808 keeps showing the google android screen , would love to gain access to any downloads but using the download links , i get a not working site page , is there any way that i can get access to all the firmware ? 1.6 - 1.7 and beyond ..thanks bob for your tireless work ..much appreciated.

Omg you just saved my old MK808B you're the man!! Keep going!

Sent from my SM-G955W using Tapatalk

[kolchose]

Hello at all
I have a problem with my MK808IIIs. He is bricked. I switch the device into Mask Mode (Pin5-6) and the program detect the Device. Erace Nand IDB is ok. When i flash an rom it stocks after reset device.
Have anybody a idea?

Gesendet von meinem SM-G900F mit Tapatalk

[mukohan]

thanks a lot bro.thanks to you i could make it work back....

[moose m79]

TF-BOOT Pins



For SDTNQGAMA-008G 5&6 pin on right side of chip are TF-BOOT Pins. I have it in my Nextbook NEXT7D12R with Amlogic AML 8726-mx.

[ATTACH=CONFIG]3068[/ATTACH]

Did you ever unbrick your 802 mkiiiss? I have the same San disk band and have it stuck in ROM mask mode any help. These are my flash errors. Have tried all four rkm factory rom

[grixd007]

I've tried using this method for my dead MK808B (first time shorting pins here). After trying to follow to the letter the instructions, the PC is displaying a message upon connecting my device. Saying Power surge on the USB port. Unknown USB device needs more power than the port can supply. Any advice please?

[d0tcould]

Hi all

I bricked my mk808b plus after flashing superceleron's rom. i followed the same procedure as other roms i had tried in the past but something went wrong along the way and i ended up with a bricked device.
HOWEVER! i have managed to unbrick it by following the advice in this thread (im in no way an electronics guy, i just try my best to follow whatever instructions i can find)

I have the newer model which i purchased from gearbest in early december last year. my nand model is:
SK Hynix
H27UCG8T2ETR
BC 445A
M3BLY8220M1 <- that row was qutie hard to read so might not be completely accurate :3


When i powered my device the blue light would still come on but nothing would appear on the tv, no google logo etc and i couldnt get into recovery so my only option was to try the nand method.
Fortunately i had used the burning tools in the past so i already had the drivers on my computer, so if you havent already used the burning tools prior to bricking your device then things might be a tad more complicated...

my device came with stock 112k4 installed so i wanted to flash back to that first
you can download it from here: http://blog.geekbuying.com/index.php...core-tv-stick/
once downloaded i opened up burning tools, loaded the firmware and then plugged my usb cable into the otg port on the mk808b plus and put the other end of the usb into a port into my pc but only halfway so it wouldnt power the device on until i had located pins 8 and 9 to short first.
once i was sure i had the needle on the correct pins i pushed the usb right the way in on my pc to power the device whilst keeping the needle on the pins and sure enough the pc recognized that something had gone on, the ports all showed up in burning tools and i was able to flash the firmware! i didnt need to hold my needle on pins 8 and 9 once it was recoginized by the pc either so i could use each hand to cross my fingers whilst watching the progress bar on the flash!

once it completed i pushed stop on the burning tools, exited the program then unplugged my device and hooked it up to the tv.
it took a few mins to get past the mbox loading screen but everything seems to be working fine so far!

many thanks to finless for the info and i hope someone else finds this helpful
all the best (time to flash something better than stock now haha)

[tothb01]

Hello! I have a mk808b, nand flash bricked.
I read the whole thread in, I tried everything, but did not get much further ...
What could be the problem? Help me please.

The last picture of the faulty device:
Unknown USB device (device description for failed request)

You can see how long it goes through the process (Device Reset OK) and then disconnect and connect back into that way.

(Sorry about the language mistakes)

[danyrolux]

This article may help some of you
How I managed to unbrick Rikomagic V5 TV Stick with RK3288 CPU - http://chinagadgetsreviews.com/how-i...k3288-cpu.html

[moose m79]

Finless need advice . Today I followed your tutorial on getting windows 8.1 to recognize my 802 mkiiis. Thank you.
Ok so android tool shows rom mask mode . I erased idb. No problems . Then hit run idb downloads then unit restarts then device disappears . tried rkbatchtool v1.8 (1.7 doesn't recognize device ) blue square appears i select firmware and hit restore. Same issue. Tried keeping pin shorted but idb fails. any ideas? heres my log.
Update using Android tool if I erase IDB then uncheck everything but loader it gives success message. It appears that any flash requiring device to restart takes it out of mask mode. Tried shorting na nd pins during restart but tool doesn't see mask mode after restart!

[ilias1908]

hi guys. i writeing from Greece. i have buy from **** a mk808b device .i try to make upgrade but i erase the nand flash memory and now i have the idb not download problem. i try all this you have write in heare but does not came to flash mode my device. so i need a litle help for you. what i must do to work my device? please forgive my english.

[jundi7680]

hi there...i'm newbie here..here's my case

try to flash mk808b to finless 2.1, but forgot to erase nand first..
it was failed... blue led still turning on but windows not recognise the tv stick..
i've tried to enter mask rom mode by shortcircuiting pin 8-9, but my laptop said the usb has run out power or something like that
is it supposed to plug the mk808b power source?

[twiddler]

For anyone getting "download boot failed" when trying to flash the rom, I found how to fix this. I read everything I could find about this and nothing seemed to work, not even crossing pins 8+9. Finally I figured out that what I needed to do is press the Erase IDB almost immediately after I plug the USB cable in, just when the rocktool detects the device. Then proceed to flash rom as soon as the rom is cleared. It seems that if you wait a few seconds before flashing, it fails. Don't know why this happens but it does. Anyway I used Finless 2.1 rom with AP6210 firmware and it seems to be working now- http://freaktab.com/forum/tv-player-...m-work-bt-wifi

[danielc]

[QUOTE=Finless;31352]OK so on the ug802 there are pads you can short to erased NAND and put the unit into MASK ROM mode. You do this as the ug802 does not have a button to put you in flash mode. But also MASK ROM mode is a special mode unlike flash mode. It erases NAND like it was a brand new chip.]

Yeah! Thank you, Thank you, Thank you. this was difficult for me to do with my tired eyes and shaky hand, but with my wife holding the flashlight and plugging in the USB connector, we made it work.
The download check had been failing every time and this cleared everything and made it work finally.