Lollipop - Wasser Firmware for Beelink R89

[wasser]

NFS and SMB filesystems are always supported in all of my firmwares. Please check your nfs/samba setup and please take a look at
my nfsmount script under /etc/init.d/

Wasser

[Thomasqqq]

First of all: THANKS FOR ALL OF YOUR WORK ON THE RK3288 CHIP!! ROCKCHIP SHOULD PAY YOU MONEY FOR DOING THEIR JOB..

Feeback:
Hardware: RK3288
Vendor: Rikomagic
Model: 902ii.

Just install your Beelink 3.0.3 on my box because i was having some problems with audio passthrough..

This version came without Kodi installed and official versions dont have DTS-HD MA support.. then i tried this version from Mo123s thread: (hope it is okay to link to his work?)
http://www.mediafire.com/download/tx...v7a-Build2.apk
It has support for DTS-HD and it is working flawless on your version.. For the first time iam able to run movies (40gb Remux) With DTS-HD MA enabled without any audio hickups or any other problems..
DTS and DD is working too without any static..

But iam not able to connect to my server using NFS or SMB? Is this deactivated in your kernel? First time i am having this problem on the roms i have tried..

I need to use FTP in Kodi to connect to my server..

[wasser]

Hi all, lollipop wasser firmware version 3.0.3 for beelink r89 is released. For more infos, please take a look at the first post.

Enjoy and don't forget to post feedbacks

Thanks
Wasser

[palmunix]

Wifi in 5ghz is working for you?
Here not the SSID appears, but I connect with mobile phone and notebook.
Only the R89 does not see the SSID.
I'm using the latest firmware.

Thanks!

[thipolito]

Hi Wasser,

On the previous Android 4 for R89 you had a update-cpu file
OC kernel: update-cpu1920-ddr700-gpu625.zip

There is no need to install this file with version 3.0.2?

Thanks

[Trepi]

Thank you very much. It's work perfect.

[uli-hh]

Hello all,
How can I zoom out maps in google maps using mouse controler. Can you halp me
Thanks

Quick double click, then immediate press mouse button again and move mouse up (zoom out) or down (zoom in).

[Trepi]

Hello all,
How can I zoom out maps in google maps using mouse controler. Can you halp me
Thanks

[spon901]

I have wasser 3.02 installed and wasser kodi 15.2. SPDIF sound works fine for both DTS and AC3. The TV is connected to the TVBOX through HDMI cable. When I tried to watch a movie no matter what resolution from a local DLNA server through KODI( kodi acts as a local dlna client ) the movies plays fine on the TV No problems at all. But when I try to watch a movie from 1Channel, or Icefilms, or different TV addon , the movie starts fine, but after some time the image get distorsed (like having a wrong frequency/resolution, the screen get blank for less than a second), and then movies continue ok. Then again after some time, same problem. The interval between these issues vary from few seconds to few minutes. I tried different hw acceleration, even without them but no difference. The internet speed is not great, so I suspect it has to do with that, however before installing this firmware I was using the stock firmware, and this problem does not exist. Is there anything I can try or should I go back to stock ROM?

Thank You

[michael2t]

Simmilar flickering but not the same mine looks green. And i never get during movie play (kodi, mxplayer, xmtv player)

I had the Flicker Issue as Well....
I was Able to resolve it By going into SuperSU and Setting the Following Options and Then Rebooting ..
Check all below ...
Enable SuperUser
Enable SU during Boot
Enable multi-user SU

Good Luck I hope it works for all of you as well ...

Michael T.

[bloodgnome]

Turning ON or OFF the 2D GPU rendering does not change anything , here is a short video of the flickering while it's happening.

Do you uli-hh & bloodgnome have the same flickering?

Simmilar flickering but not the same mine looks green. And i never get during movie play (kodi, mxplayer, xmtv player)

[heiko123]

Is created about the logitech software "MyHarmony" and search a new Device "BeeLink R89"

But it will not be all keys within commands.

[gpharos]

logitech remote within a beelink driver.

How is that done. I have a few T42 RK3188 and one RK3288 that I would love to get a MS R5/R6 remotes working. If Logitech works I might be able to get Microsoft remotes to work.

[heiko123]

I use the originally remote and that working fine.
and a logitech remote within a beelink driver.

[Bigbeka]

I'm using this last version on Tronsmart R28 device,
but I don't have the network issue.

This video flicker is now and then.

BUT this is the best rom what I'm could testing. Thanks Wasser

What remote do you use ? I had to return to Tronsmart 111k4_20150115s firmware because original remote isn't recognized.