Lollipop - Wasser Firmware for Beelink R89

[Prodb]

Hi, it is possible to add an "how to" in this threat. Form original beelink rom to the newest wasser rom? I could not find it in this forum. Many thanks.

Gesendet von meinem SM-G900F mit Tapatalk

[doc539]

very good rom thanks Wasser ! ... does anyone know how to fake wifi connection ?

[amclean123]

I'm using this ROM with Kodi for live TV. The problem is after beta 6, none of the newer versions have any picture with Mpeg2 codec with hardware acceleration. There is sound but no picture. If I switch to software decoding it is fine but then again HD content is choppy this time.

Use this http://www.freak-tab.de/wasser/rk-ko...2-lollipop.apk and turn off passthrough audio in Kodi. MX Player will play these just fine with passthrough 5.1. I use ES File Manger to play my network files using MX Player until Kodi gets fixed.

[grummel2005]

Thank you all so far!

Bootloader mode is no problem. When i hit erase he want to go to Mask mode and the process interrupted. Upgrading is possible without problems. Erasing still not possible.

Snoop

thx for testing - but how we can clear the memory without opening the device ???

[hedehede81]

I'm using this ROM with Kodi for live TV. The problem is after beta 6, none of the newer versions have any picture with Mpeg2 codec with hardware acceleration. There is sound but no picture. If I switch to software decoding it is fine but then again HD content is choppy this time.

[spon901]

It is possible to put Wasser lolipop on sdcard and boot from there?

[marcelomelo]

Wasser, would you build a new firmware with HD Audio support? It would be perfect! Openhour and now Ugoos supports it, but on beelink r89 has shutdown issue.

[tiesenhausen]

That all depends on individual perspective.

Not everybody has a dedicated receiver and therefore SPDIF through the likes of a soundbar is quite sufficient for 5.1 and DTS passthrough.

That is true but if we are talking about BD ISO or mkv with high bitrate we can enjoy HD audio. Apropos Wassers Kitkates firmwares do it support.

[Snoopy12345]

You load up the android tool and choose the second tab 'Upgrade Firmware'

[ATTACH=CONFIG]n534961[/ATTACH]

Click on the 'Firmware' button to browse and locate the image that you wish to flash.

You will also see the 'EraseFlash' button that you can use to erase your device.

I don't know how you manually reset an Orbsmart to get into bootloader mode ready to flash using the 'Upgrade' button but if you have a rooted device then you can do it from within Android by installed the Petrus Rebbot app from the Play Store (https://play.google.com/store/apps/d...s.reboot&hl=en)

When you have your flashing cable connected between the box and your PC, run the Reboot app and choose the option 'Reboot to Bootloader'

[ATTACH=CONFIG]n534962[/ATTACH]

I am assuming that you have the correct drivers installed at this point and that your PC sees the box correctly, in which case the status of the Android tool will change to show that you have a connected and correctly recognised box.

Then use eraseflash, followed by upgrade.

You will see the status of the flashing in the window on the right and when complete the box will reboot and go through the process of completing the installation, which begins with a format of the internal storage.

The whole process should take no more than 10 minutes.

Thank you all so far!

Bootloader mode is no problem. When i hit erase he want to go to Mask mode and the process interrupted. Upgrading is possible without problems. Erasing still not possible.

Snoop

[bluesmanuk]

Regretfully, Wassers LP does not support HD audio exit on a receiver. For TV box it is much more important than the existing support of ancient and primitive spdif.

That all depends on individual perspective.

Not everybody has a dedicated receiver and therefore SPDIF through the likes of a soundbar is quite sufficient for 5.1 and DTS passthrough.

[tiesenhausen]

Regretfully, Wassers LP does not support HD audio exit on a receiver. For TV box it is much more important than the existing support of ancient and primitive spdif.

[spon901]

What is the procedure to install wasser lolipop on sdcard?
I tried linuxium script, it works ok, but it seem the wasser hang on boot, having the WASSER word moving on screen indefinitely. ( I tried using loader 2.17 and also with loader 2.19 from wasser ROM)

[gefattern]

Hi Snoopy,first of all have you installed the RockchipDrivers on your Pc?
There is a Video in YT/how to flash Firmware on UT3 ,this would help and normally Wasser always has Flashinstructions in his Rom Folders.
Good luck

gefattern

[bluesmanuk]

Hello again,

we need step by step Instruction how to use androidtool for erase and finally flash wasser. Would be Great!

Thx in Advance!

Snoop

You load up the android tool and choose the second tab 'Upgrade Firmware'



Click on the 'Firmware' button to browse and locate the image that you wish to flash.

You will also see the 'EraseFlash' button that you can use to erase your device.

I don't know how you manually reset an Orbsmart to get into bootloader mode ready to flash using the 'Upgrade' button but if you have a rooted device then you can do it from within Android by installed the Petrus Rebbot app from the Play Store (https://play.google.com/store/apps/d...s.reboot&hl=en)

When you have your flashing cable connected between the box and your PC, run the Reboot app and choose the option 'Reboot to Bootloader'



I am assuming that you have the correct drivers installed at this point and that your PC sees the box correctly, in which case the status of the Android tool will change to show that you have a connected and correctly recognised box.

Then use eraseflash, followed by upgrade.

You will see the status of the flashing in the window on the right and when complete the box will reboot and go through the process of completing the installation, which begins with a format of the internal storage.

The whole process should take no more than 10 minutes.

[gridlock]

Hello again,

we need step by step Instruction how to use androidtool for erase and finally flash wasser. Would be Great!

Thx in Advance!

Snoop

http://freaktab.com/forum/tv-player-support/rk3288-devices/beelink-3288-devices/17093-beelink-r89-ubox-rom-tools-release

read through the first post....