NEOMODE CUSTOM ROM MK808B PRO S905 & MXQ PRO S905

[romula]

i keep receiving error of wrong footer when flashing. and it gets worse im now stuck booting to recovery getting "E:cannot load volume /misc!" am i bricked? any help would be great. Im using mk808b pro s905.

[neomode]

This Rom is not for Flashing via Recovery.
You must Install the Rom via USB Burning Tool!

Neomode

[CapitalX]

Thank you CapitalX for reporting that.

You are welcome

[CapitalX]

My usb burning tool says this error when i try to flash it.

[ATTACH=CONFIG]n570892[/ATTACH]

Just remove the power charger and Use only the USB cable.
and flash your device like usual , the error won't come up this time .

[CapitalX]

Mine is a p201 version of the MXQ PRO box too. is there any way to modify the p200 rom to work on the p201 box, or are there any other known working roms out there? Thanks

actually, the p200 and p201 are almost the same I tried both of them on my MXQ PRO p201.
this ROM have different device drivers. this is why I have reported that the wireless , Ethernet and remote control is not working>

[romula]

This Rom is not for Flashing via Recovery.
You must Install the Rom via USB Burning Tool!

Neomode

Yes that's how i flashed. with burning tool received low power error. But now it will not boot it boots to recovery every time and says E:cannot load volume /misc!

[neomode]

Firstly forget that Error.
Second Flash again and Select Force erase all.
When you begin to Flash Plugin in the Power Supply.

Neomode

[romula]

Firstly forget that Error.
Second Flash again and Select Force erase all.
When you begin to Flash Plugin in the Power Supply.

Neomode

tried as you said and received "UBOOT/low power/send command/USB Control setup error"

edit: figured it out and feel dumb for not seeing this before wasnt using latest burning tool worked first try with latest tool.

[jerryngm]

Great ROM! Working great on my MXQ Pro p200 with an USB to Ethernet. Standby mode work flawlessly!!!

Do you recommend any bluetooth dongle (preferly 4.0+) that works on this kernel?

Is there anyway to control volume of a USB DAC or it doesn't support at all?

Thanks for making a great rom! Looking for more updates in the future

[jerryngm]

actually, the p200 and p201 are almost the same I tried both of them on my MXQ PRO p201.
this ROM have different device drivers. this is why I have reported that the wireless , Ethernet and remote control is not working>

Ethernet/wifi/remote will not work on most ROM anyway (custom/3rd party roms). You will need to grab a USB Ethernet adapter and Remote.conf from your original ROM for the remote to work.

[fwupow]

I just got an MXQ-Plus yesterday. It uses Amlogic S905 64 bit SoC quad-core with quad-core Mali-450 GPU. Is the Plus version the same as the Pro version or close enough? I only want custom ROM because I hate the factory launcher and the lack of being able to restore the bottom bar with an up-swipe.

[jerryngm]

I just got an MXQ-Plus yesterday. It uses Amlogic S905 64 bit SoC quad-core with quad-core Mali-450 GPU. Is the Plus version the same as the Pro version or close enough? I only want custom ROM because I hate the factory launcher and the lack of being able to restore the bottom bar with an up-swipe.

You can flash it but Wifi/Ethernet may not work so you need a usb Ethernet.

[kleem]

This rom doesn't work with p200 MXQ Pro 4k, or at least not the remote anyway. I didn't check if ethernet/wifi were working, as I gave up a soon as the remote was dead, and flashed back to stock.

[Johnoo]

----

[skiper]

could not make an adaptation, for MXQ PRO QUICKPLAY p200
thanks