OTT MXQ 4K Pro - New build testing

[rapalax]

I tried hugsun would not burn for me........my problem with the L-Mxpro is stuff like salts and exodus hang trying to resolve the sources not sure if its the 1 gig ram or the firmware all my other boxes are 2 gig boxes and they work ok going to try to get original firmware from my supplier will report back............

Cheers,
Vec

So I have tried both :
L-MXQPRO-KODI-0511 and hugsun_s905_mxq_20160509 ... Both of them seem to be equally bad when it comes to Kodi Stability (both hang on AAC 5.1 audio w/ Passthrough) and hugsun_s905_mxq_20160509 seems terrible for my 8189etv wifi reception.

I remember my stock ROM dated ~ 0314 was fine for Kodi.. would anyone have that version available ? Or maybe may something else to suggest ?

[qq3y6]

Hi can this firmware be installed if we copy to sd card? I know you can use usb burning tool, but it has u-boot.bin.sd.bin , just wondering if it can be installed from an sd card?

http://chinagadgetsreviews.com/download-android-lollipop-5-1-1-stock-firmware-eny-mxq-pro-tv-box-3.html

L-MXQPRO-KODI-0511
aml_sdc_burn.ini
aml_upgrade_package.img
u-boot.bin.sd.bin

[mowgli80]

hugsun_s905_mxq_20160527.7z

https://mega.nz/#!Scl3xCRT!dJ436yFN3696YTt1mOaXL87NBJd_CBLelxi0keBlgnQ

Kodi krypton works without hiccups.

[Macrom]

hugsun_s905_mxq_20160527.7z

https://mega.nz/#!Scl3xCRT!dJ436yFN3696YTt1mOaXL87NBJd_CBLelxi0keBlgnQ

Kodi krypton works without hiccups.

Do you installed this? Allready downloaded from panbaidu but mac 0 key issue on burning tool..



Enviado desde mi Lenovo K910 mediante Tapatalk

[mowgli80]

I was able to install. There is a patch from inphic which allows you to get over the mac 0 key error.

Edit: Here it is

http://inphic.com/downloads/tools-dr...ing-tool-patch

[qq3y6]

Has anyone tried installing p201T firmware on a p201? If so what was the results?

[mowgli80]

Only problem I have is I cannot resume from remote. Suspend works fine. Anybody has a clue what could be wrong? I have a p200 box.

[qq3y6]

mowgli80 , what firmware are you using on your p200 ?

Only problem I have is I cannot resume from remote. Suspend works fine. Anybody has a clue what could be wrong? I have a p200 box.

[Stahldroid]

Well i decided to redo my cooling again in my box, so i bought a sheet of thermal pad, removed the top metal plate on the box, used another and bigger heatsink, bought a cheap notebook cooler with 2 fans (dismantled it), built a wooden box an placed the plastic structure with fans inside. [img=http://s5.postimg.org/r5wmlnwvr/IMG_27052016_140245.jpg] img hosting [img=http://s5.postimg.org/pvyt6m33r/IMG_27052016_140349.jpg] image hosting site no sign up [img=http://s5.postimg.org/rrllhrrxz/IMG_27052016_143301.jpg] image hosting over 10mb [img=http://s5.postimg.org/qzixiknqv/IMG_27052016_143309.jpg] imagur [img=http://s5.postimg.org/uo8mi1xrr/IMG_27052016_154625.jpg] image upload [img=http://s5.postimg.org/g17o0dz5j/IMG_27052016_154633.jpg] pic host [img=http://s5.postimg.org/ua7aigdo7/IMG_27052016_154905.jpg] imgur Now after some testing the temperatures are good! When i´m doing light tasks temps go from 39º and 50º celsius. When i´m doing heavy tasks ( ran stability test from antutu) temps hit the max temperature of 63º celsius which is pretty amazing and safe to say that heating won´t be an issue from now on. A few days back i showed to you another cooling setup but heating was still severe, after some time connected and doing heavy tasking ( ran stability test from antutu) temperature rose to about 85º celsius just within 3 minutes of testing so i decided that it wasn´t an effective cooling solution because the heat was trapped inside and of course it will be catastrophic after some time as passed. Fans and better coolers do all the difference!

Nice Work ;-) Two Thinks 1. The power Adapter is to small dimensioned for the Amlogic s905, with 2Amper -> Dont supply the Fans from the USB 2.Turn the Fans around and suck the warm air out the case. Maybe interesting --> Neomode is perhaps working on a ROM for the MXQ Pro 4K http://freaktab.com/forum/tv-player-...5-mxq-pro-s905 -Page 7 --> Use Trickster Mod -APP and push the CPU Frequency and performance settings for fluent working. So on you can see that all 4 cores are Wirkung --> Xposed Framework works (32Bit) but not with all Function e.g. Awesome Pop-Up or XhaloFloatingWindow (no portable Windows/multi Windows) --> If you want usw a bigger power Adapter , See current carrying capacity of conductor tracks Habe a nice Day

[Stahldroid]

Sry empty

[Stahldroid]

@hmsgr

Two Thinks
1. The power Adapter is to small dimensioned for the Amlogic s905, with 2Amper -> Dont supply the Fans from the USB
2.Turn the Fans around and suck the warm air out the case.

Maybe interesting
--> Neomode is perhaps working on a ROM for the MXQ Pro 4K http://freaktab.com/forum/tv-player-...5-mxq-pro-s905 -Page 7

--> Use Trickster Mod -APP and push the CPU Frequency and performance settings for fluent working. So on you can see that all 4 cores are Wirkung

--> Xposed Framework works (32Bit) but not with all Function e.g. Awesome Pop-Up or XhaloFloatingWindow (no portable Windows/multi Windows)

[Stahldroid]

--> If you want usw a bigger power Adapter , See current carrying capacity of conductor tracks

[mowgli80]

mowgli80 , what firmware are you using on your p200 ?

I am using the hungsun p201 firmware 20160527 I linked above.

[qq3y6]

Thanks for the info. I tried the hungsun p201 firmware 20160527 , but i get no signal on m y box.

The only firmware that works on my box is: hugsun_s905_mxq_rtl8189_20160129.img , hugsun_s905_mxq_rtl8189_20160225.img

I was hoping someone would find something newer for my box. Maybe a hugson 20160527 with rtl8189 , i don't know where to look for the firmware

I am using the hungsun p201 firmware 20160527 I linked above.

[mowgli80]

I have 8189 based wifi in my box so that is surely not a problem. Which box do you have?