HPH NT-V8 RK3368 Marshmallow ROM by mo123

[shivattaque]

https://ufile.io/9d6af

Here is a video to see what happens on my amp with DTS HD Master more test soon.

[shivattaque]

ICE Test:

https://ufile.io/556df

https://ufile.io/01ac0

RAW test:

https://ufile.io/3c007

https://ufile.io/ee939

--------------------------------

[mo123]

https://ufile.io/75b95


Log:

SPMC

http://pastebin.com/4KzfMV6t

Kodi 18 Master

http://pastebin.com/DGdE8zGi

NTMC

http://pastebin.com/5eN8yBCh

(just a Litle part)

Does all 3 Kodi's behave the same, no pass-through?
Did you set HDMI Bitstream in the round blue settings app?
'Keep audio device alive' in Kodi's, try to set it to always
'Sync playback to display' - Turned off

Please try again with SPMC and then each time with the 3 different Android Audio output settings in SPMC - Android PCM, Android IEC, Android RAW
And then those 3 settings in combination with - 'Passthrough output device' Android IEC & Android RAW Passthrough.
So it will be 6 different combinations.
Exit SPMC fully and then change to another audio output and test again.

Your testing will help a lot.

I'm very close to solving the problem I think.

The spreadsheet was also updated.

https://mega.nz/#!ARMwzRgL!8wxD5ws66-gKDGI_43X7-Rl-b5iPjTsxXq7cmEhdDT0

But no need to do all the tests if nothing works at the moment.

I will make some small changes to the ROM and then you can use the spreadsheet for the new updated ROM.

[shivattaque]

https://ufile.io/75b95

Log:

SPMC

http://pastebin.com/4KzfMV6t

Kodi 18 Master

http://pastebin.com/DGdE8zGi

NTMC

http://pastebin.com/5eN8yBCh

(just a Litle part)

[shivattaque]

NTMC : http://pastebin.com/Qn6dwz8H
(smal part)

Kodi 18 Master : http://pastebin.com/nZnStGSm

SPMC : http://pastebin.com/4KzfMV6t

	AUDIO TEST FILES	PLAYBACK				COMMENTS
BAD	GOOD	GREAT	OTHER
1	Dolby Digital Plus 5.1			x
2	Dolby Digital Plus 7.1 Channel Check
3	Dolby TrueHD 5.1	x				litle song, cut,cut, cut, cut,
4	Dolby TrueHD 7.1 Channel Check
5	Dolby ATMOS 'Amaze' Demo
6	Dolby ATMOS '747' Audio Demo
7	Dolby ATMOS 'Helicopter' Audio Demo
8	DTS-HD HRA 5.1	x				litle song, cut,cut, cut, cut,
9	DTS-HD HRA 7.1
10	DTS-HD MA 5.1 Channel Check	x				litle song, cut,cut, cut, cut,
11	DTS-HD MA 5.1 24-bit 192kHz audio-only sample	x				litle song, cut,cut, cut, cut,
12	DTS-HD MA 7.1 Speaker Phase
13	DTS-HD MA 7.1 'Dredd' Audio Channel Check
14	DTS:X 'All Around Us' Demo	x				litle song, cut,cut, cut, cut,
15	DTS:X 'Gravity' Demo	x				litle song, cut,cut, cut, cut,
16	DTS:X 'Movement' Demo	x				litle song, cut,cut, cut, cut,
17	LPCM 5.1			x
18	LPCM 7.1
19	AAC 5.1
20	FLAC 5.1 24-bit 192kHz audio-only sample
21	DTS 5.1			x

[mo123]

Sorry but 1.2 does not start.
Blocked image nargrace.
wait 30mn 2 times
(i68G)

Hi

New link posted for Marshmallow v1.2 ROM
Because the previous file was too big, sometimes it caused problems with boot.
See the Opening Post for details.
https://mega.nz/#!8NtxxY5Y!pCy0HxGqG...x93H0kIDKgQLy4
Pass: nagrace

Please test pass-through with this spreadsheet

https://mega.nz/#!ARMwzRgL!8wxD5ws66-gKDGI_43X7-Rl-b5iPjTsxXq7cmEhdDT0

[Shomari]

Mo if i set the Governor to "performance" the highest Clock of the "big" is 1296mhz , so there must something be wrong , because if i use a other Governor 1501mhz is reached well.

The little looks good he reachs 1200 in performance.Do you think that the 1.2 shall boot on my UT4 ??? Hope it helps to make future Roms better.


have a nice Day


gefattern

.. that's normal - interactive will actually be likely to get you better performance on firmware with factory cpu settings, as that's what the tunables and firmware is set up for.

[gefattern]

Hi Mo and all others

Whats wrong that it not boot , what kind of Device does Jura46 have ??? , so i dont need to download it for my UT4 ???

Mo if i set the Governor to "performance" the highest Clock of the "big" is 1296mhz , so there must something be wrong , because if i use a other Governor 1501mhz is reached well.

The little looks good he reachs 1200 in performance.Do you think that the 1.2 shall boot on my UT4 ??? Hope it helps to make future Roms better.


have a nice Day


gefattern

[shivattaque]

Sorry but 1.2 does not start.
Blocked image nargrace.
wait 30mn 2 times
(i68G)

[Jura46]

Does not turn on. The system version v1.1 has started.

[gefattern]

Hi Mo ,


of course i will check the German Parts and if needed i report and help for a good Rom.I am indeed excited if the new upcoming Ugoos Roms will fix my strange Wifi Stutters

the On/Off Bugs and the German Translations. !!!!!?????


nice Day

Greetings


gefattern

[mo123]

New v1.2 Marshmallow firmware released.
I released in in a hurry so still need to check some things.

https://mega.nz/#!YFVxDYrS!wSeIGVOez3IrGRccQUnEvQVdy1wRRW5SEYrXh4AYvWM

Password: nagrace
(Use 7zip to unzip and copy whole mega link to download)

- Improved Timezone and location information
- Increased zoom size for screen, users with 4K tv's please test if you can go fullscreen.
- Improved German translation, check if there is still some big translations to be done
- Fixed Power off shortcut
- Added Navigation bar hide shortcut, long press the ir remote menu key to hide/unhide it.

- Improved pass-through, please test on NTMC, RKMC, SPMC and Kodi 17.
Copy and make 4 sheets for each Kodi to be tested.
Download the test videos in the spreadsheet to test.
Provide as much information as possible.
Make sure your av receiver has the latest firmware installed.
Go to Settings app, blue round one and change audio output device to HDMI Bitstream or SPDIF, for stereo sound it can stay on Default.
In Kodi enable the pass-through options your device supports, speakers have to stay on 2.0, don't change that to 5.1 or 7.1 as that is the way Kodi is programmed.
https://mega.nz/#!cMlBgSiI!GsVLADwqm...omFxpiqed2Ulbs

It will help a lot to see where the problems are and if it is a Kodi setting, old receiver firmware problem, only affects one user or many with the same setup.

[gefattern]

Hi Mo ,

We all wait to try it.


nice Day

gefattern

[cyber7]

I will release an updated ROM maybe today or tomorrow.
It will be very important for users to test HDMI pass-through in different Kodi's so all remaining pass-through problems can be solved.

WOW!

[mo123]

I will release an updated ROM maybe today or tomorrow.
It will be very important for users to test HDMI pass-through in different Kodi's so all remaining pass-through problems can be solved.