[ROM] AlfaWise H96 PRO+ 3/16Gb - 3/32Gb - 3/64Gb - SCV4A-ATV 7.1.2 (DDR3/DDR4 - ANDROIDTV VERSION)

[Intelian]

Hello. First i would like to say thank you for this great rom! :-) I have a question about the build-in Chromecast. I believe i read somewhere that it is not possible to get it to work.. so my question is... is it possible to completly disable it somewhere in the settings? It is a bit annoying that the "Chromecast screen" shows up while a videofile is paused ( during a phonecall ect.)
Thanks in advance :-)

[peppuzz]

hello superceleron congratulations for this rom. I downloaded the scv1 rom on the front page, I installed it correctly. I inserted the scv4a zip in the sd card to update it, but when I go to do so the box goes off without then re-enter the recovery for the flash as if it were missing the twrp. where am I wrong? thank you

[tbt]

Hi,


I just bought the H96 Pro+ 3/32GG (S32-V6), but this ROM don´t seem to work for me. I flashed several times and used USB Burning Tool and also Burn Card Maker. The flashing process was ok with no errors, however when I connect the box, the TV is always black, although I can access the TWRP.

What could be wrong?

[fatbottom]

Does 2 channel DTS work? Playing back a movie with that, I just got PCM. Regular multi-channel DTS displays as 5.1, which is correct

[Mss81]

Just read through a bunch of pages here and managed to unbrick my Wisdom version of this TV Box.
Any news on getting the ATV Rom to work on it? dies @ 7% in usb burning tool

[12:15:47 325][HUB2-5][Err]--failed:[12:15:47 325][HUB2-5][Err]--Check command return failed
[12:15:47 329][HUB2-5][Err]--[0x32030201]Uboot/Get result/DiskInitial error

thanks!

Hi seryser ,

Try with SD card method. It worked for me (the version for green PCB) by holding the reset button during the complete flash process. Thereafter install the SCV4 through TWRP.

[defbond]

Anyone managed to burn sdcard on Linux or OSX os? Will a simple dd of the img file to the sdcard work?

[seryser]

Just read through a bunch of pages here and managed to unbrick my Wisdom version of this TV Box.
Any news on getting the ATV Rom to work on it? dies @ 7% in usb burning tool

[12:15:47 325][HUB2-5][Err]--failed:[12:15:47 325][HUB2-5][Err]--Check command return failed
[12:15:47 329][HUB2-5][Err]--[0x32030201]Uboot/Get result/DiskInitial error

thanks!

[odyssey77]

I've bought about a dozen H96 Pro+ boxes for resale and I finally got one of these boxes. I've tried countless firmwares, they either wouldn't flash or if they did flash they would just constantly crash. The only one I've got working on these boxes is https://mega.nz/#!3c4HhChY!pU8S1zAUA...GruaKc2lSD13jE

It isn't the newest one I found, but none of the newer ones would work without constantly rebooting or crashing apps.

It's not the best solution, but it's the only one I've found. Hope it helps.

Hi!
Thank you, the box flashed ok, but sometimes It craches on wifi connection.
this rom is at least 80% working.
If someone is having q201_9377-userdebug 7.1.2 NHG47L 20171020-testkeys rom please contact me!


BR

[alexan_teelk]

Hi!
Can someone help with my case.
I have a GB H96 Pro+ 3Gb/32Gb that came preinstalled with wisdom q201_9377-userdebug 7.1.2 NHG47L 20171020-testkeys rom.
The rom was buggy had some problems with lan connection (was not linked after restart) so after few resets started working again.
I decided to reflash the box with celerons image, but as I found later no rom is working.
using usb flash tool 2.1.2 and corrected licence file I always get error messages when flashing.
I managed it to revive with this version of wisdom image : https://mega.nz/#F!8qhRRaYJ!2ZA3VLjv...TF27g!Bqo1FDoQ
but now the wifi doesn't work, and also some apps are still buggy

I also have discrepancies in version of the PCB and RAM??
I have a green PCB, but the hynix ram chip specification is DDR3:
Photos:



I am searching for a good working wisdom/working rom or any other advice.

I've bought about a dozen H96 Pro+ boxes for resale and I finally got one of these boxes. I've tried countless firmwares, they either wouldn't flash or if they did flash they would just constantly crash. The only one I've got working on these boxes is https://mega.nz/#!3c4HhChY!pU8S1zAUA...GruaKc2lSD13jE

It isn't the newest one I found, but none of the newer ones would work without constantly rebooting or crashing apps.

It's not the best solution, but it's the only one I've found. Hope it helps.

[ZenTauren]

I just got the H96 Pro H3 version with S905X and 5GHz WiFi, it would be highly appreciated if someone could port a ROM for this version.

[odyssey77]

Hi!
Can someone help with my case.
I have a GB H96 Pro+ 3Gb/32Gb that came preinstalled with wisdom q201_9377-userdebug 7.1.2 NHG47L 20171020-testkeys rom.
The rom was buggy had some problems with lan connection (was not linked after restart) so after few resets started working again.
I decided to reflash the box with celerons image, but as I found later no rom is working.
using usb flash tool 2.1.2 and corrected licence file I always get error messages when flashing.
I managed it to revive with this version of wisdom image : https://mega.nz/#F!8qhRRaYJ!2ZA3VLjv...TF27g!Bqo1FDoQ
but now the wifi doesn't work, and also some apps are still buggy

I also have discrepancies in version of the PCB and RAM??
I have a green PCB, but the hynix ram chip specification is DDR3:
Photos:



I am searching for a good working wisdom/working rom or any other advice.

[Lacix]

Lacix
yes i installed rom that you linked and i have no codec problem. no pixellation or macroblocking. But sometimes my box slows and frozen on this nexus rom.

If I knew which file (codec) needs to be replaced from the other firmware to fix the issue I would try it. (I've downloaded a tool which can extract amlogic firmwares)
If someone knows it please share.

[Deki]

ch3mn3y
Thank you for your reply solution is not brick my box i search other firmware again thank you for reply.

[ch3mn3y]

Deki
Don't think so. It won't even work on all variants of H96 Pro+, so I would say that Tanix is out of the question. However You may try it. There is huge chance for brick, but if You won't try, than You won't know if t works

[Deki]

Dear all, sorry if this question has already been asked, but anybody know if this custom firmware work on TANIX TX9 PRO (box have same feature like Alfawise H96 Pro

thank you in advance for answer.