Announcement

Collapse
No announcement yet.

Announcement

Collapse
No announcement yet.

Help me please erro [0x30405004] USB burning tool

Collapse
X
Collapse
 
  • Page of 9
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 4 5 6 7 8 9 template Next
    #31
    first try the 792mhz version, if it does not work, then 672mhz version. Boot log is desired.

    u-boot@792mhz
    u-boot@672mhz

    Comment

      #32
      Here is 792mhz bootlog:

      GXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:80;POC:3;RCY:0 ;EMMC:0;READ:800;SD:0;READ:0;0.0;CHK:0;
      no sdio debug board detected
      TE: 139759

      BL2 Built : 11:58:42, May 27 2017.
      gxl gc3c9a84 - xiaobo.gu@droid05

      set vdd cpu_a to 1120 mv
      set vdd cpu_b to 1050 mv
      set vddee to 1000 mv
      Board ID = 6
      CPU clk: 1200MHz
      DQS-corr enabled
      DDR scramble enabled
      DDR3 chl: Rank0+1 @ 792MHz - FAIL
      DDR4 chl: Rank0+1 @ 792MHz - PASS
      Rank0: 2048MB(auto)-2T-18
      Rank1: 1024MB(auto)-2T-18
      DataBus test pass!
      AddrBus test pass!
      Load fip header from SD, src: 0x0000c200, des: 0x01400000, size: 0x00004000
      New fip structure!
      Load bl30 from SD, src: 0x00010200, des: 0x01100000, size: 0x0000d600
      Load bl31 from SD, src: 0x00020200, des: 0x05100000, size: 0x00018400
      Load bl33 from SD, src: 0x0003c200, des: 0x01000000, size: 0x00066200
      ▒▒GXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:80;POC:3;RCY :0;EMMC:0;READ:800;SD:0;READ:0;0.0;CHK:0;
      no sdio debug board detected
      TE: 139738

      BL2 Built : 11:58:42, May 27 2017.
      gxl gc3c9a84 - xiaobo.gu@droid05

      set vdd cpu_a to 1120 mv
      set vdd cpu_b to 1050 mv
      set vddee to 1000 mv
      Board ID = 6
      CPU clk: 1200MHz
      DQS-corr enabled
      DDR scramble enabled
      DDR3 chl: Rank0+1 @ 792MHz - FAIL
      DDR4 chl: Rank0+1 @ 792MHz - PASS
      Rank0: 2048MB(auto)-2T-18
      Rank1: 1024MB(auto)-2T-18
      DataBus test pass!
      AddrBus test pass!
      Load fip header from SD, src: 0x0000c200, des: 0x01400000, size: 0x00004000
      New fip structure!
      Load bl30 from SD, src: 0x00010200, des: 0x01100000, size: 0x0000d600
      Load bl31 from SD, src: 0x00020200, des: 0x05100000, size: 0x00018400
      Load bl33 from SD, src: 0x0003c200, des: 0x01000000, size: 0x00066200
      epGXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:80;POC:3;RCY :0;EMMC:0;READ:800;SD:0;READ:0;0.0;CHK:0;
      no sdio debug board detected
      TE: 139746

      BL2 Built : 11:58:42, May 27 2017.
      gxl gc3c9a84 - xiaobo.gu@droid05

      set vdd cpu_a to 1120 mv
      set vdd cpu_b to 1050 mv
      set vddee to 1000 mv
      Board ID = 6
      CPU clk: 1200MHz
      DQS-corr enabled
      DDR scramble enabled
      DDR3 chl: Rank0+1 @ 792MHz - FAIL
      DDR4 chl: Rank0+1 @ 792MHz - PASS
      Rank0: 2048MB(auto)-2T-18
      Rank1: 1024MB(auto)-2T-18
      DataBus test pass!
      AddrBus test pass!
      Load fip header from SD, src: 0x0000c200, des: 0x01400000, size: 0x00004000
      New fip structure!
      Load bl30 from SD, src: 0x00010200, des: 0x01100000, size: 0x0000d600
      Load bl31 from SD, src: 0x00020200, des: 0x05100000, size: 0x00018400
      Load bl33 from SD, src: 0x0003c200, des: 0x01000000, size: 0x00066200
      ^▒▒GXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:80;POC:3;RC Y:0;EMMC:0;READ:800;SD:0;READ:0;0.0;CHK:0;
      no sdio debug board detected
      TE: 139757

      BL2 Built : 11:58:42, May 27 2017.
      gxl gc3c9a84 - xiaobo.gu@droid05


      And 672mhz:

      GXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:80;POC:3;RCY:0 ;EMMC:0;READ:800;SD:0;READ:0;0.0;CHK:0;
      no sdio debug board detected
      TE: 140643

      BL2 Built : 20:32:17, Sep 8 2017.
      gxl g6296b83 - xiaobo.gu@droid12

      set vdd cpu_a to 1120 mv
      set vdd cpu_b to 1050 mv
      set vddee to 1000 mv
      Board ID = 6
      CPU clk: 1200MHz
      DQS-corr enabled
      DDR scramble enabled
      STICKY_REG0: 0x00000000
      STICKY_REG1: 0x00000000
      STICKY_REG9: 0x00000000
      DDR3 chl: Rank0+1 @ 672MHz - FAIL
      STICKY_REG0: 0x00000000
      STICKY_REG1: 0x00000000
      STICKY_REG9: 0x00000000
      DDR4 chl: Rank0+1 @ 672MHz - PASS
      Rank0: 2048MB(auto)-2T-18
      Rank1: 1024MB(auto)-2T-18
      DataBus test pass!
      AddrBus test pass!
      Load fip header from SD, src: 0x0000c200, des: 0x01400000, size: 0x00004000
      New fip structure!
      Load bl30 from SD, src: 0x00010200, des: 0x01100000, size: 0x0000d600
      Load bl31 from SD, src: 0x00020200, des: 0x05100000, size: 0x0002c600
      Load bl33 from SD, src: 0x00050200, des: 0x01000000, size: 0x00066600
      ፕ▒▒GXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:80;POC:3;RC Y:0;EMMC:0;READ:800;SD:0;READ:0;0.0;CHK:0;
      no sdio debug board detected
      TE: 140683

      BL2 Built : 20:32:17, Sep 8 2017.
      gxl g6296b83 - xiaobo.gu@droid12

      set vdd cpu_a to 1120 mv
      set vdd cpu_b to 1050 mv
      set vddee to 1000 mv
      Board ID = 6
      CPU clk: 1200MHz
      DQS-corr enabled
      DDR scramble enabled
      STICKY_REG0: 0x00000000
      STICKY_REG1: 0x00000000
      STICKY_REG9: 0x00000000
      DDR3 chl: Rank0+1 @ 672MHz - FAIL
      STICKY_REG0: 0x00000000
      STICKY_REG1: 0x00000000
      STICKY_REG9: 0x00000000
      DDR4 chl: Rank0+1 @ 672MHz - PASS
      Rank0: 2048MB(auto)-2T-18
      Rank1: 1024MB(auto)-2T-18
      DataBus test pass!
      AddrBus test pass!
      Load fip header from SD, src: 0x0000c200, des: 0x01400000, size: 0x00004000
      New fip structure!
      Load bl30 from SD, src: 0x00010200, des: 0x01100000, size: 0x0000d600
      Load bl31 from SD, src: 0x00020200, des: 0x05100000, size: 0x0002c600
      Load bl33 from SD, src: 0x00050200, des: 0x01000000, size: 0x00066600
      ▒GXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:80;POC:3;RCY: 0;EMMC:0;READ:800;SD:0;READ:0;0.0;CHK:0;
      no sdio debug board detected
      TE: 140679

      BL2 Built : 20:32:17, Sep 8 2017.
      gxl g6296b83 - xiaobo.gu@droid12

      set vdd cpu_a to 1120 mv
      set vdd cpu_b to 1050 mv
      set vddee to 1000 mv
      Board ID = 6
      CPU clk: 1200MHz
      DQS-corr enabled
      DDR scramble enabled
      STICKY_REG0: 0x00000000
      STICKY_REG1: 0x00000000
      STICKY_REG9: 0x00000000
      DDR3 chl: Rank0+1 @ 672MHz - FAIL
      STICKY_REG0: 0x00000000
      STICKY_REG1: 0x00000000
      STICKY_REG9: 0x00000000
      DDR4 chl: Rank0+1 @ 672MHz - PASS
      Rank0: 2048MB(auto)-2T-18
      Rank1: 1024MB(auto)-2T-18
      DataBus test pass!
      AddrBus test pass!
      Load fip header from SD, src: 0x0000c200, des: 0x01400000, size: 0x00004000
      New fip structure!
      Load bl30 from SD, src: 0x00010200, des: 0x01100000, size: 0x0000d600
      Load bl31 from SD, src: 0x00020200, des: 0x05100000, size: 0x0002c600
      Load bl33 from SD, src: 0x00050200, des: 0x01000000, size: 0x00066600

      Comment

        #33
        RAM memory has now been properly initialized. BL33 (u-boot) does not start though. There was apparently an error writing. Please first delete all data from the SD card -> use SD Formatter. Then repeat the writing process from the bootloader @792Mhz.

        Comment

          #34
          So, I use SD formatter and format sd card (FAT32).
          Then use BootcardMaker with u-boot.bin.sd.bin @792Mhz and make the card.
          It says "success", then I put sdcard to slot in the box.
          Connect box to pc and power, Putty give me bootlog.
          I write this to see if I miss something.

          GXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:80;POC:3;RCY:0 ;EMMC:0;READ:800;SD:0;READ:0;0.0;CHK:0;
          no sdio debug board detected
          TE: 139824

          BL2 Built : 11:58:42, May 27 2017.
          gxl gc3c9a84 - xiaobo.gu@droid05

          set vdd cpu_a to 1120 mv
          set vdd cpu_b to 1050 mv
          set vddee to 1000 mv
          Board ID = 6
          CPU clk: 1200MHz
          DQS-corr enabled
          DDR scramble enabled
          DDR3 chl: Rank0+1 @ 792MHz - FAIL
          DDR4 chl: Rank0+1 @ 792MHz - PASS
          Rank0: 2048MB(auto)-2T-18
          Rank1: 1024MB(auto)-2T-18
          DataBus test pass!
          AddrBus test pass!
          Load fip header from SD, src: 0x0000c200, des: 0x01400000, size: 0x00004000
          New fip structure!
          Load bl30 from SD, src: 0x00010200, des: 0x01100000, size: 0x0000d600
          Load bl31 from SD, src: 0x00020200, des: 0x05100000, size: 0x00018400
          Load bl33 from SD, src: 0x0003c200, des: 0x01000000, size: 0x00066200
          ▒GXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:80;POC:3;RCY: 0;EMMC:0;READ:800;SD:0;READ:0;0.0;CHK:0;
          no sdio debug board detected
          TE: 139774

          BL2 Built : 11:58:42, May 27 2017.
          gxl gc3c9a84 - xiaobo.gu@droid05

          set vdd cpu_a to 1120 mv
          set vdd cpu_b to 1050 mv
          set vddee to 1000 mv
          Board ID = 6
          CPU clk: 1200MHz
          DQS-corr enabled
          DDR scramble enabled
          DDR3 chl: Rank0+1 @ 792MHz - FAIL
          DDR4 chl: Rank0+1 @ 792MHz - PASS
          Rank0: 2048MB(auto)-2T-18
          Rank1: 1024MB(auto)-2T-18
          DataBus test pass!
          AddrBus test pass!
          Load fip header from SD, src: 0x0000c200, des: 0x01400000, size: 0x00004000
          New fip structure!
          Load bl30 from SD, src: 0x00010200, des: 0x01100000, size: 0x0000d600
          Load bl31 from SD, src: 0x00020200, des: 0x05100000, size: 0x00018400
          Load bl33 from SD, src: 0x0003c200, des: 0x01000000, size: 0x00066200

          Comment

            #35
            BL33 does not start. Do you have a Linux PC at home? I prefer Linux Terminal ..
            Or another box with preinstalled Linux or Android (rooted)?

            Comment

              #36
              Do not have LInux, sorry.
              I have R-Box Pro box and it's rooted. What we can do with it?
              I have Nvidia Shield K1 tablet, also.

              Comment

                #37
                We can write u-boot to the MicroSD card via Android Terminal. I'll write a short tutorial right away.

                Comment

                  #38
                  1. Format MicroSD Card in FAT32 and put it in the Android box.
                  2. Copy u-boot.bin.sd.bin to the folder /sdcard of your Android Box.
                  3. Open Android Terminal App and run the following commands:
                  Code:
                  su

dd if=/dev/block/zero of=/dev/block/mmcblk1 bs=1 count=442

dd if=/dev/block/zero of=/dev/block/mmcblk1 bs=512 skip=1 seek=1 count=2047

dd if=/sdcard/u-boot.bin.sd.bin of=/dev/block/mmcblk1 bs=1 count=442

dd if=/sdcard/u-boot.bin.sd.bin of=/dev/block bs=512 skip=1 seek=1

sync

                  Comment

                    #39
                    Can I do this with my rooted HTC One M8?
                    Ok, will try when I get home. Thanks.
                    Last edited by Nebojsa; 07 June 2018, 22:25.

                    Comment

                      #40
                      dd: /dev/block/zero: no such file or directory

                      Here is what I have in /dev/block directory

                      https://s20.postimg.cc/qfgzqigmh/IMAG3044.jpg

                      This is a directory of my working R-Box pro box where I started Terminal emulator for Android.

                      Comment

                        #41
                        sorry I fell asleep. Before we move on, try to write u-boot.bin instead of u-boot.bin.sd.bin on the SD card. I do not have windows and can not control how BootcardMaker works

                        Comment

                          #42
                          Yes, so do I
                          I tried with u-boot.bin but no luck.

                          LOOP:2;EMMC:0;READ:800;SD:0;READ:0;CHK:AA;USB:8;LO OP:3;EMMC:0;READ:800;SD:0;READ:0;CHK:AA;USB:8;LOOP :4;EMMC:0;READ:800;SD:0;READ:0;CHK:AA;USB:8;LOOP:5 ;EMMC:0;READ:800;SD:0;READ:0;CHK:AA;USB:8;

                          Comment

                            #43
                            Ok., then we were right with the procedure. Incidentally, "dd" is also available for Windows.
                            You can also run Linux on Windows via VMware.
                            Please inform yourself about these possibilities and I will check the BL33 in time.

                            Comment

                              #44
                              Nebojsa

                              I'll provide you with another u-boot version (u-boot.img) to download today. You can easily write this version to the MicroSD card via the Win32DiskImager.

                              Comment

                                #45
                                I got Win32DiskImager and waiting Thanks!

                                Comment

                                Previous 1 2 3 4 5 6 7 8 9 template Next

                                What's Going On

                                Collapse

                                There are currently 1875 users online. 2 members and 1873 guests.

                                Most users ever online was 63,956 at 18:56 on 20 March 2025.

                                Working...
                                X

                                We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.

                                By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.

                                I Agree