Tanix TX6 TV Box - Allwinner H6 4/32GB Dual WiFi BT4.1 or 5

[Bimbo80]

and what version of software do you have?

20190508 android 9 tx6 4x32

[Hikvision]

and what version of software do you have?

[Bimbo80]

there is an update from 13.06 - android 9

On my 4x32..tv box
not found update...
can i force update ?
i have some problema with iptv streaming e wifi
sometime..
the streaming restart and wifi down
router is about 5 mt distance tv box

[suoko]

[QUOTE=c,lei;n777564]

Hi,

I just received this box (tx6-a) with android 9 and I can't see the bluetooth. Is it a bugged android or a bugged box ?
Should I try downgrade to android 8 or 7 ?

It's a stupid consumer.

People like you really,really need to read the WWW pages of the sites you buy stuff from.

Q: What\'sthe difference between this unit and this other one at your store? (https://www.banggood.com/Tanix-TX6-A...p-1378746.html)


A : this one does not have 5g wifi and bluetooth. It\'s obvious...
Answered by Immerge on April 19,2019



According to the specs on the sites that sell it the TX6-A doesn't have bluetooth support, nor is there android 8 for it or any other TX6.

https://www.banggood.com/Tanix-TX6-A..._warehouse=USA

Actually it's a stupid seller cause I bought the product below and received the -A variant.
Thanks for the info.

https://s.click.aliexpress.com/e/YMqieBO

Inviato dal mio Redmi 4X utilizzando Tapatalk

[bajann]

did not understand

i need stock rom? becouse i cant type 758523 i type on sc v1 rom
i came from android 9 to 7 i need to set activation code mac adress

[Hikvision]

did not understand

[bajann]

I set it to 4-32

Only on stock rom works activation key

[c,lei]

[QUOTE=suoko;n777481]Hi,

I just received this box (tx6-a) with android 9 and I can't see the bluetooth. Is it a bugged android or a bugged box ?
Should I try downgrade to android 8 or 7 ?

It's a stupid consumer.

People like you really,really need to read the WWW pages of the sites you buy stuff from.

Q: What\'sthe difference between this unit and this other one at your store? (https://www.banggood.com/Tanix-TX6-A...p-1378746.html)


A : this one does not have 5g wifi and bluetooth. It\'s obvious...
Answered by Immerge on April 19,2019



According to the specs on the sites that sell it the TX6-A doesn't have bluetooth support, nor is there android 8 for it or any other TX6.

https://www.banggood.com/Tanix-TX6-A..._warehouse=USA

[Hikvision]

I set it to 4-32

[RiCkLaR_atvX]

there is an update from 13.06

For which branch of the firmware releases?

[suoko]

Hi,

I just received this box (tx6-a) with android 9 and I can't see the bluetooth. Is it a bugged android or a bugged box ?
Should I try downgrade to android 8 or 7 ?

I also have another question:
I successfully installed homeassistant via termux+pip by following this guide: https://blog.blaulan.com/2018/home-automation.html
Now I want to do everything (TV, gaming and home automation) with this 30 euro device.
To do so I have to find a zigbee dongle that is supported by android so that the box can become not only the homeassistant server, but also the zigbee gateway.
I found these two:

• https://www.geniatech.com/product/uzb-100/
• https://www.smartthings.com/link

Do you have any experience with them or other suggestion ?

[Hikvision]

there is an update from 13.06 - android 9

[Hikvision]

in update 0625 android 7

[scooterTX6]

Looks like you are on right track to get it working. You will have to check root Settings (global or secure) through terminal an make sure there isn't a Touch setting deactivated, or a build.prop line that signals Touchless device. But my guess is the Pine64 H6 files should work in the Tanix H6. One thing I haven't checked with the Tanix 9.0 firmware is if it has a system app that makes device Touchless, I mention this because with Beelink H6 device running Android 7 it had a special system apk to make device Touchless. Good luck.

Thanks! Appreciate the info and the encouragement.

[c,lei]

I have a 21" touchscreen which was an HP Slate Pro 21 which is running Android 4.4 (bleh). It has HDMI in and USB out. I know it works because I hooked a PC up to it and everything works fine. The TX6 shows a cursor which won't move but if it happens to be on something clickable, tapping the screen activates the button/link so I know it sees something. I've already got the .idc file written. I'm looking for the hid-multitouch.ko file. You can pick up a 24" for about $250. There's also add on frames for 55" at around that price as well. You just need to get your .idc file right if the monitor is already in the hid-miultitouch.c file. If not that gets a bit more difficult as you'ld need to add in your device. Mine's been in there for many, many years.

and thanks for your response!

If I'm going to spend $250 on something, it's not a touchscreen monitor nor a add on frame for a 55" tv set.